TE0630 series modules have been designed to be mechanically and (as far as possible) electrically backward compatible with TE0300 series modules. Designs based on a TE0300 module can be ported to a TE0600 module as described below.
Mechanical compatibility
TE0630 series modules are mechanically equivalent to the TE0300 series modules:
- module dimensions: same length, width, height;
- mount holes: same dimensions and placements;
- B2B (board to board) connectors: same type and placements.
Designs based on a TE0300 module can be ported to a TE0600 module without any mechanical redesign.
Power supply compatibility
TE0300 and TE0630 series modules have the same power supply requirements. Designs based on a TE0300 module can be ported to a TE0600 module without any power supply redesign.
Power supply pins and ground pins of TE0300 series modules match those of TE0630 series modules. Designs based on a TE0300 module can be ported to a TE0600 module without any power supply pin and ground pin redesign.
Signal type compatibility
Most user signal pins of TE0300 series modules match their corresponding pins on TE0630 series modules. Designs based on a TE0300 module can be ported to a TE0600 module without any redesign for those pins.
User signal pins of TE0300 series modules NOT matching their corresponding pins on TE0630 series modules are listed in the following table. Designs based on a TE0300 module using the user signal pins listed in the following table can be ported to a TE0600 module by adapting the project to the type (SIO, DIO, CIO) and polarity (_P. _N) change of the corresponding signal pins.
| Connector:Pin | TE0300 | TE0300 type | TE0630 pin name | TE0630 type |
|---|---|---|---|---|
J4:5 | B3_L01_P | DIO | V3_IO_01 | SIO |
J4:7 | B3_L01_N | DIO | V3_IO_02 | SIO |
J4:9 | B3_L02_P | DIO | V3_IO_03 | SIO |
J4:11 | B3_L02_N | DIO | V3_IO_04 | SIO |
J4:17 | B0_L24_N | DIO | V0_IO_01 | SIO |
J4:19 | B0_L24_P | DIO | V0_IO_01_N | DIO |
J4:6 | B3_L07_P | DIO | V3_IO_06 | SIO |
J4:8 | B3_L07_N | DIO | V3_IO_07 | SIO |
J4:10 | B3_L03_N | DIO | V3_IO_08 | SIO |
J4:12 | B3_L03_P | DIO | V3_IO_09 | SIO |
J5:13 | B3_L22_P | DIO | V3_IO_12 | SIO |
J5:15 | B3_L22_N | DIO | V3_IO_13 | SIO |
J5:19 | B3_L20_P | DIO | V3_IO_14 | SIO |
J5:21 | B3_L20_N | DIO | V3_IO_15 | SIO |
J5:16 | B3_L21_N | DIO | V3_IO_17 | SIO |
J5:18 | B3_L21_P | DIO | V3_IO_18 | SIO |
J5:20 | B3_L23_N | DIO | V3_IO_19 | SIO |
J5:22 | B3_L23_P | DIO | V3_IO_20 | SIO |
J5:32 | B2_L06_P | DIO | V3_IO_24 | SIO |
J5:34 | B2_L06_N | DIO | V3_IO_25 | SIO |
J5:41 | B2_GCLK13 | CIO | V2_IO_02 | SIO |
J5:49 | B2_GCLK_L13_N | CIO | V2_IO_24_P | DIO |
J5:51 | B2_GCLK_L13_P | CIO | V2_IO_24_N | DIO |
TE0300 and TE0630 pin type differences.
User signal type definitions are listed in the table below.
Type | Description |
|---|---|
DIO | Unrestricted, general-purpose differential user-I/O pin. |
SIO | Unrestricted, general-purpose (single-ended) user-I/O pin. |
CIO | Unrestricted, general-purpose differential user-I/O pin. This pin also can be used as FPGA clock input. |
TE0300 and TE0630 pin types
Signals routed as one differential signal pair can be also used as two single-ended signals.
I/O bank compatibility
The I/O bank of most user signal pins of TE0300 series modules matches the I/O bank of their corresponding pins on TE0630 series modules. Designs based on a TE0300 module can be ported to a TE0600 module without any redesign for those pins.
User signal pins of TE0300 series modules whose I/O bank does NOT match the I/O bank of their corresponding pins on TE0630 series modules are listed in the following table. Designs based on a TE0300 module using the user signal pins listed in the following table can be ported to a TE0600 module by adapting the project to the I/O bank change of the corresponding signal pins.
| Connector:Pin | TE0300 I/O bank | TE0630 I/O bank |
|---|---|---|
J4:15 | 0 | 3 |
J4:36 | 0 | 3 |
J4:52 | 0 | 3 |
J5:33 | 2 | 3 |
J5:28 | 2 | 3 |
J5:30 | 2 | 3 |
J5:32 | 2 | 3 |
J5:34 | 2 | 3 |
J5:38 | 2 | 3 |
J5:40 | 3 | 2 |
J5:42 | 3 | 2 |
J5:50 | 3 | 2 |
J5:52 | 3 | 2 |
TE0300 and TE0630 user signals I/O banks differences.
The following table lists the supply voltage of I/O banks for both TE0300 and TE0630 series modules.
| Bank | TE0300 | TE0630 |
|---|---|---|
B0 | VCCIO (1.2 V - 3.3 V) | VCCIO (1.2 V - 3.3 V) |
B1 | 2.5 V | 1.5 V |
B2 | 3.3 V | 3.3 V |
B3 | 3.3 V | 3.3 V |
TE0300 and TE0630 I/O bank supply voltages.
The supply voltage of I/O bank 0 of both module series can be configured by the user.
If the supply voltage of bank 0 of the TE0300 module is 3.3 V, designs based on a TE0300 module using the user signal pins of bank 0 listed in the table above can be ported to a TE0600 module without any redesign for those pins.
If the supply voltage of bank 0 of the TE0300 module is lower than 3.3 V, designs based on a TE0300 module using the user signal pins of bank 0 listed in the table above can be ported to a TE0600 module by adapting the project to the I/O bank change of the corresponding signal pins.
The supply voltage of I/O bank 2 and 3 of both module series is 3.3 V. Designs based on a TE0300 module using the user signal pins of banks 2 and 3 listed in the table above can be ported to a TE0600 module without any redesign for those pins.
Overview
Content Tools