| Company | Trenz Electronic GmbH |
|---|---|
| PCN Number | PCN-20251113 |
| Title | AMB0010-01 resistor R38 and R39 change |
| Subject | BOM Change |
| Issue Date | 2025-11-13 |
Products Affected
This change affects all Trenz Electronic AMB0010 baseboards of revision AMB0010-01 with serial number greater than 810834 and 810785.
Affected Product |
|---|
| AMB0010-01-* |
Changes
#1 Changed resistor (R38, R39) from 1 kOhm to 10 kOhm.
Type: BOM Change
Reason: Improve signal quality for SoM PHY initialization while SoM boot phase.
Impact: Improved signal quality.
Method of Identification
The revision number is visible on the top side of the PCB. The serial number is written on the QR-Code on the top side of the PCB.
Production Shipment Schedule
This change takes place with immediate effect. If the new version is not suitable for your application and still former version of the board is needed, please contact us.
Contact Information
If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at
- forum.trenz-electronic.de
- wiki.trenz-electronic.de
- support%trenz-electronic.de (subject = PCN-20251113)
phone
national calls: 05741 3200-0
international calls: 0049 5741 3200-0
Disclaimer
Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.
This PCN follows JEDEC Standard J-STD-046.
Overview
Content Tools