Company | Trenz Electronic GmbH |
---|---|
PCN Number | PCN-20240229 |
Title | TE0713-02 to TE0713-03 Hardware Revision Change |
Subject | Hardware Revision Change |
Issue Date | 2024-03-01 |
Products Affected
This change affects all Trenz Electronic TE0713 SoMs: TE0713-02*.
Affected Product | Replacement |
---|---|
TE0713-02-72C46-A | TE0713-03-72C46-A |
TE0713-02-82C46-A | TE0713-03-82C46-A |
(ED: Tabelle ist fertig!)
Changes
#1
Type:
Reason:
Impact:
#5 Added diode (D2) between signals "INIT" and "PROG_B".
Type: Schematic Change
Reason: Keep FPGA in reset while signal "PROG_B" is low during initial power-up.
Impact: None.
#5 Added pull-up resistor (R71) for signal "SPI_DQ2".
Type: Schematic Change
Reason: Add external pull-up resistor for write protect functionality.
Impact: None. Improve usable flash options.
#6 Changed inductors from BKP0603HS121-T to MPZ0603S121HT000 for L1, L2, and L3.
Type: BOM Change
Reason: EOL of component.
Impact: None.
Method of Identification
Production Shipment Schedule
From XXXXX, after old stock is gone. If the new revision is not suitable for your application and still the former revision of the board is needed, please contact us.
Contact Information
If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at
- forum.trenz-electronic.de
- wiki.trenz-electronic.de
- support%trenz-electronic.de (subject = PCN-JJJJMMDD)
phone
national calls: 05741 3200-0
international calls: 0049 5741 3200-0
Disclaimer
Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.
This PCN follows JEDEC Standard J-STD-046.