You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 11
Next »
| | FMC(1) | FMC Vadj | PMODS | ETH | HDMI | Camera Link | SD Card | USB Host | VBATT |
|---|
| TE0710 | Support | | | | | | 1.8V B16 I/O | Not supported | not used |
| TE0711 | Support | | | | | | | | not used |
| TE0712 | Support | | | 100 MBit | | MGT's | | | not used |
| TE0713 | Support | | | | | | | | not used |
| TE0715-15 | Support | Full support | | | | MGT's | Full support | Full support | used for RTC and Key RAM |
| TE0715-30 | Support | Max 1.8V | | | | MGT's | Full support | Full support | used for RTC and Key RAM |
| TE0720 | Support | Full support | Full support | Full support | Ffull support | Full support | Full support | Full support | used for RTC and Key RAM |
| TE0741 | Support | | | | | MGT's | Not supported | | not used |
| TE0841 | Support | | | | | MGT's | Not supported | | used for Key RAM |
- (1) FMC is a LPC Connector on TE0701: DP0_..., GBTCLK0_... and TRST_L Pins are not connected. GA0 and GA1 set to GND. I2C and JTAG access over CPLD.
Separate TE0701_FMC_PINOUT table (PDF/XLSX) is available on: Trenz_Electronic Download-Pinout
| | ETH | SD Card | USB Host | Reset | User LEDs | USB UART | USB JTAG |
|---|
| TE0710 | | 1.8V B16 I/O | Not supported | Yes | 2 | Yes | Yes |
| TE0711 | | | Not supported | Yes | | Yes | Yes |
| TE0712 | 100 MBit | | Not supported | Yes | | Yes | Yes |
| TE0713 | | | Not supported | Yes | | Yes | Yes |
| TE0715 | | | Full support | Yes | | Yes | Yes |
| TE0720 | Full support | Full support | Full support | Yes | | Yes | Yes |
| TE0741 | | | Not supported | Yes | | Yes | Yes |
| TE0841 | | | Not supported | Yes | | Yes | Yes |
| | PMODS | ETH | SD Card | USB Host |
|---|
| TE0710 | | | 1.8V B16 I/O | Not supported |
| TE0711 | | | | Not supported |
| TE0712 | | 100 MBit | | Not supported |
| TE0713 | | | | Not supported |
| TE0715 | | | Ffull support | Full support |
| TE0720 | Full support | Full support | Full support | Full support |
| TE0741 | | | | Not supported |
| TE0841 | | | | Not supported |
| | ETH1 | ETH2 | SD Card | USB Host |
|---|
| TE0710 | | | 1.8V B16 I/O | Not supported |
| TE0711 | | | | Not supported |
| TE0712 | 100 MBit | | | Not supported |
| TE0713 | | | | Not supported |
| TE0715 | Full support | Full support | | Full support |
| TE0720 | Full support | Full support | Full support | Full support |
| TE0741 | | | | Not supported |
| TE0841 | | | | Not supported |