Company | Trenz Electronic GmbH |
---|---|
ACN Number | ACN-20240206 |
Title | CameraLink removal |
Subject | Upcoming Changes |
Issue Date | 2024-02-07 |
Products Affected
This change affects all Trenz Electronic TE0701 SoMs: TE0701-07*.
Affected Product |
---|
TE0701-07* |
Changes
#1 Omitted CameraLink Connector (J3).
Type: Schematic Change
Reason: EOL of Component.
Impact: CameraLink not longer available.
#2 Changed FMC connector (J10) from LPC to HPC to use connections from CameraLink Connector (J3).
Type: Schematic Change
Reason: CameraLink connection usage.
Impact: None. HPC connector is backward compatible to LPC connector.
Further changes will be available within following PCN.
Method of Identification
The revision number is visible on the top side of the PCB.
Production Shipment Schedule
After board revision TE0701-07 is finished. If the new revision is not suitable for your application and still the former revision of the board is needed, please contact us.
Contact Information
If you have any questions related to this ACN, please contact Trenz Electronics Technical Support at
- forum.trenz-electronic.de
- wiki.trenz-electronic.de
- support%trenz-electronic.de (subject = ACN-20240206)
phone
national calls: 05741 3200-0
international calls: 0049 5741 3200-0
Disclaimer
Any projected dates in this ACN are based on the most current product information at the time this ACN is being issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.
This ACN is oriented according to JEDEC Standard J-STD-046.