You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

  1. Insert micro-SD card with downloaded boot images into SD card slot of ARTY-Z.
  2. Connect Motor/Driver Board to ARTY-Z so that both PMoD connectors are aligned.
  3. Attach plastic DEMO load to the motor shaft (optional step).
  4. Connect a micro-USB Cable (not supplied) to ARTY-Z and to a PC with serial terminal program.
  5. Connect Ethernet cable (not supplied) to ARTY-Z and wired network with DHCP server.
  6. Connect power supplies to the ARTY-Z and Driver Board and apply power.
  7. ARTY-Z will log IP address to serial console, point a web browser to this IP Address.
  8. It is also possible to view/change the IP Address from console (login/pass are root/root).
  9. EDDP GUI appears, click "Motor" to start the Motor, it should start spinning.



 

All jumpers are in default positions: ARTY-Z JP5-REG, JP4-SD and Driver board J13-Single (3 jumpers).


What’s next?

Full Documentation with Design Examples and resource links are available from: Trenz Electronic EDDP Web Hub http://trenz.org/EDDP

  • No labels