Skip to end of metadata
Go to start of metadata

Overview

The Trenz Electronic TE0723 is an Arduino compatible FPGA module integrating a Xilinx Zynq-7010, 512 MByte DDR3L, and 16 MByte SPI Flash Memory for configuration and operation.

All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Only PCB Revision 01 is Open Source.

 

 REV 1REV 2
DDRLPDDR2DDR3L
DDR Size64MB512MB (128MB)
PMODnoyes

Resources

Key Features

  • Xilinx XC7Z010-1CLG225C
  • Form Factor: Arduino Shield
  • Dual ARM Cortex-A9
  • 512 MByte DDR3L
  • 16 MByte SPI Flash memory
  • 12 MHz MEMS Oscillator low power consumption
  • Hi-Speed USB2.0 ULPI Transceiver
  • 23 FPGA I/O's available on board-to-board connectors
  • MicroSD Card socket
  • Micro USB OTG
  • RGB LED (PL I/O connected)
  • "Done" LED (inverted polarity)
  • On-board USB JTAG and UART
  • CERN Open Hardware Licence 1.2

PCB Revision 1

 

 

 

  • No labels