| Company | Trenz Electronic Gmbh |
|---|---|
| PCN Number | PCN-20160211 |
| Title | TE0712-01 to TE0712-02 revision change |
| Subject | Change of hardware revision |
| Issue Date | 20160211 |
Products Affected
This change affects all Trenz Electronic TE0712 SoMs of the first revision: TE0712-01-*.
TE0712-01-* | TE0712-02-* |
Changes
#1 added pullup on SPI "hold"
Type: Enhancement
Reason: Makes SPI accessible in case Quad bit is cleared and HOLD pin is pulled low by on chip pulldown
Impact: None
#2 added Testpoints
Type: Improvement
Reason: Improvement of production tests
Impact: None
#3 Routed MII clock pin additionally to FPGA
Type: Enhancement
Reason: Allows DDR clock to be different from PHY clock
Impact: None
#4 Added Testpoints
Type: Layout change
Reason: Improve production testing
Impact: None
#5 routed one more PLL clock output to FPGA
Type: Enhancement
Reason: One more clock is available from PLL
Impact: None
#6 Added I2C SCL Pullup
Type: Enhancement
Reason: It allows AXI_I2C to be used without defining on-chip pullup on SCL line
Impact: None
Method of Identification
The model code and revision number (e.g. TE0712-01 or TE0720-02) are printed on the top side of the PCB.
Production Shipment Schedule
From March 2016.
Contact Information
If you have any questions related to this PCN, please contact Trenz Electronic's Technical Support at
- forum.trenz-electronic.de
- wiki.trenz-electronic.de
- support%trenz-electronic.de (subject = PCN-20160211)
phone
national calls: 05223 65301-0
international calls: 0049 5223 65301-0
Disclaimer
Any projected dates in this PCN are based on the most current product information at the time this PCN is being
issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information,
please contact your local Trenz Electronic sales office, technical support or local distributor.
Overview
Content Tools