Skip to end of metadata
Go to start of metadata
CompanyTrenz Electronic GmbH
PCN NumberPCN-20181214
Title

TEF1001-01 to TEF1001-02 Hardware Revision Change 

SubjectTrenz Electronic TE0803 Hardware Change
Issue Date

20181214

Products Affected

This change affects all variations of TEF1001 SoMs of revision: TEF1001-01-*

affected product

suggested upgrade

TEF1001-01-*

TEF1001-02-*

Changes

#1  Added C87, C88 4.7µF

Type: Schematic change

Reason: Enhance PL internal supply voltage ripple.

Impact: None

#2 C154 Incremented  from 27pF to 33pF

Type: BOM change

Reason: Adjust feed back compensation capacitor of 1.8V DCDC for best performance.

Impact: None

#3  Routed 12V Input from PCIe Edge Connector, Added Input Power Protection Circuits for ATX 12V and PCIe Edge Connector (U23 with T1, T2 and U24 with T5, T6, Resistors and Capacitors), Power Priority Switch T3

Type: Enhancement

Reason: Allow for using PCIe power supply, protect against over and under voltage.

Impact: Card can be supplied by PCIe edge connector (max 25W), but if ATX supply is connected this has priority.

#4 Added 4xDip Switch S1

Type: Schematic change

Reason: Allow for easily selection of FMC VADJ and enable JTAG interface of SC CPLD U5.

Impact: FMC VADJ adjustable to 3.3V,  2.5V, 1.8V, 1.5V ,1.25V , 1.2V,  0.8V via S1-2 to S1-4. System Controller JTAG accesible when S1-1 is on.

#5 Added Transistor T4 and Resistors

Type: Enhancement

Reason: Read the FMC_PRSNT_M2C Value

Impact: System controller is able to evaluate if FMC is present or not.

#6 Added Power Switch U25 and Capacitors

Type: Enhancement

Reason: Possibility to switch the FMC fan.

Impact: FMC fan can be swiched by system controller. In the current system controller design the fan is switched on when FMC is present.

#7 Added 10 x LEDs, D1-D10 and Levelshifter (U11, U21, U22)

Type: Enhancement

Reason: Provide possibility for feedback to user

Impact: 10 user LEDs connected to FPGA logic available.


Method of Identification

The model code and revision number (e.g. TEF1001-01 or TEF1001-02) are printed on the top side of the PCB.

Production Shipment Schedule

After November 2018.

Contact Information

If you have any questions related to this PCN, please contact Trenz Electronic's Technical Support at

Disclaimer

Any projected dates in this PCN are based on the most current product information at the time this PCN is

being issued, but they may change due to unforeseen circumstances.  For the latest schedule and any

other information, please contact your local Trenz Electronic sales office, technical support or local distributor.

  • No labels