|Company||Trenz Electronic GmbH|
TEB0724-02 Under Voltage Protection Change
|Subject||Trenz Electronic TEB0724 Hardware Change|
This change affects TEB0724 carrier of revision TEB0724-02 with serial numbers greater than 568263.
#1 Replaced R40 by 953kOhm and R44 by 147kOhm
Type: BOM change
Reason: Large start up currents led due to adverse conditions (e.g. weak powersupply, long wires, increased contact resistance) to a voltage drop below the under voltage lock out limit of the input protection circuit.
Impact: Under voltage protection limit is decreased to 4.06V, which gives a larger marging for a voltage drop during start up.
Method of Identification
The Serial number is written on a white QR Code sticker and placed on the top side of the PCB within the white frame. The model code and revision number (TEB0724-02) are printed on the top side of the PCB.
Production Shipment Schedule
September 2019, after old stock is gone.
If you have any questions related to this PCN, please contact Trenz Electronic's Technical Support at
- support%trenz-electronic.de (subject = PCN-20190829)
national calls: 05223 65301-0
international calls: 0049 5223 65301-0
Any projected dates in this PCN are based on the most current product information at the time this PCN is being
issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information,
please contact your local Trenz Electronic sales office, technical support or local distributor.