Skip to end of metadata
Go to start of metadata
CompanyTrenz Electronic GmbH
PCN NumberPCN-20210506 Power up Improvment
TitleTEB0707-02
SubjectBOM change
Issue Date

2021-05-06

Products Affected

This change affects TEB0707 of Revision 02: TEB0707-02.

Changes

#1 Change C10 to 1µF X5R

Type: BOM change
Reason: DCDC U1 detects an overcurrent situation if large capacitive loads are turned on with power switch Q1, e.g. when several bank IO voltages are powered by 3.3V. This is prevented by enlarging the rise time of Q1, hence using a larger capacitor C10.
Impact: Depending on capabilities of connected 4x5 module, all banks can be powered by 3.3V.

Method of Identification

Boards with serial number equal or greater than 667339 (white QR Sticker) are affected by this PCN and have the new 1µF capacitor installed.

Production Shipment Schedule

Boards and assemblies shipped with begining of Mai 2021 are affectedby this PCN.


Contact Information

If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at

Disclaimer

Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances.  For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.
This PCN follows JEDEC Standard J-STD-046.






  • No labels