Skip to end of metadata
Go to start of metadata

Table of contents

Overview

CPLD Device with designator U11: LCMX02-256HC

Feature Summary

  • FPGA UART routing
  • CSI_GPIO routing

Firmware Revision and supported PCB Revision

See Document Change History

Product Specification

Port Description

Name / opt. VHD NameDirectionPinDescription
C_TCK / BDBUS0in30UART from FTDI
C_TDI  / BDBUS1out32UART to FTDI
C_TDO / BDBUS2in1/ currently_not_used
C_TMS / BDBUS3in29/ currently_not_used
CSI_GPIO0 / CSI_IO0out25drive by MIO52
CSI_GPIO1 / CSI_IO1out23drive by MIO53
DONEin8FPGA DONE Pin
DSI_C_N 12/ currently_not_used
DSI_C_P 11/ currently_not_used
DSI_D0_N 10/ currently_not_used
DSI_D0_P 9/ currently_not_used
DSI_D1_N 14/ currently_not_used
DSI_D1_P 13/ currently_not_used
DSI_XA 16/ currently_not_used
DSI_XB 17/ currently_not_used
GLEDout5LED
JMODE 26Enable JTAG access to CPLD for Firmware update (zero: normal IOs, one: CPLD JTAG access). Selectable over J15 Jumper
MIO52in20connected to CSI_GPIO0
MIO53in21connected to CSI_GPIO1
MIO8in28UART from Zynq
MIO9out27UART to Zynq
RLEDout4LED

 

Functional Description

UART

UART connection between MIO8/9 and  BDBUS0/1.

CSI-GPIO

CSI_GPIO0 drives by MIO52, CSI_GPIO1 drives by MIO53.

DSI

Not used

LED

LEDDescription
GREENON when Zynq Done pin is down else OFF
REDUART activity

 

Appx. A: Change History

Revision Changes

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

DateDocument RevisionCPLD Firmware RevisionSupported PCB RevisionAuthorsDescription

v.5


 

REV01REV01, REV02, REV03document style update
2017-05-22v.3REV01REV01, REV02, REV03John HartfielRevision 01 finished
2017-03-02

v.1

REV01REV01, REV02, REV03Initial release
 All   

Appx. B: Legal Notices

Data Privacy

Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.

REACH, RoHS and WEEE

REACH

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.


 

  • No labels