FX22MB_REG0_START_TX = 0x02
This command starts reading data integrity test for the data transmitted from EP6 of the USB FX2 microcontroller to the host computer.
This MicroBlaze command does not require the use of SET_INTERRUPT before and GET_INTERRUPT after. It is instead required to send this command before starting data transmission from the USB FX2 to the host computer.
It is also required to use FX22MB_REG0_STOP after the data transmission is ended.
This command writes data (12 bytes) to the requested I2C address.
Byte | Value | Description |
|---|---|---|
1 | 0xAD | I2C_WRITE FX2 API command ID |
2 | 0x3F | I2C Address |
3 | 0x0C | FX2_Parameters.I2C_BYTES=0x0C |
4 | 0x00 | - |
5 | 0x00 | - |
6 | 0x00 | - |
7 | 0x02 | MB_Commands.FX22MB_REG0_START_TX |
From 8 to 64 | - | Not used |
FX22MB_REG0_START_TX MicroBlaze command.
Reply packet doesn't contain any usable information.
Overview
Content Tools