Page History
...
- Connect JTAG and power on the carrier with module
- Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
- Type on Vivado TCL Console: TE::pr_program_flash _binfile -swapp u-boot
Note: To program with SDK/Vivado GUI, use special FSBL (zynq_fsbl_flash) on setup
optional "TE::pr_program_flash _binfile -swapp hello_te0726" possible - Copy image.ub on SD-Card
- use files from (<project foler>/_binaries_<Articel Name>)/boot_linux from generated binary folder,see: Get prebuilt boot binaries
- For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
- Important: Do not copy Boot.bin on SD(is not used see SD note), only other files.
- Copy init.sh on SD-Card
- location: <design_name>/misc/sd/
- Insert SD-Card
...
Overview
Content Tools