Page History

...

• Intel® MAX 10 FPGA [10M08SAU169C8G]

  • Package: UBGA-169

  • Speed Grade: C8 (Slowest)

  • Temperature: 0°C to 85°C (Commercial)

  • Package compatible device 10M082...10M16 as assembly variant on request possible

• SDRAM Memory up to 32 Mbyte (8Mbyte default)

• USB 2.0 Multipurpose UART/FIFO IC (FT2232H)

  • 4 Kbit EEPROM Memory for FTDI configuration data
  • Micro USB Receptacle (communication and power)
• SPI Flash - NOT INSTALLED (only special option)
• 8x User LED's
• 18 Bit 2 MSPS Analog to Digital Converter

• 2x SMA Female Connector

• I/O interface: 23x GPIO - Arduino MKR compatible

• Power Supply: 5V

• Dimension: 86.5mm x 25mm

• Fully-Differential Programmable-Gain Instrumentation Amplifier

...

1. SMA Connector, J5...6

2. Amplifier, U12

3. Series Voltage Reference, U8

4. Analog to Digital Converter, U6

5. Voltage Regulator, U4 - U10 - U13 - U16
   

6. Switching Voltage Regulator, U11

7. SDRAM Memory, U2

8. Intel® MAX 10 FPGA, U1

9. SPI Flash Memory, U5 (not populated)

10. Oscillator, U7 - U19

11. FTDI USB to JTAG/FIFO Adapter, U3

12. User LEDs, D2...9

13. FTDI Configuration EEPROM, U9

14. Configuration/Status LED (Red) , D10

15. Power-On LED (Green), D1

16. Push Button, S1...2

17. Micro USB Connector, J9

18. 1x14 Pin Header, J2 (Not assembled)

19. 1x6 Pin Header, J4 (Not assembled)

20. 1x4 Pin Header, J3 (Not assembled)

21. 1x14 Pin Header, J1 (Not assembled)

...