Page History
...
In this Firmware Version CRUVI Low Speed connector CA has four signals configured as input and another four as output. Depending on the connectors and signals used/needed this can be changed by customizing and updateing the firmware. Also the 3.3V signals on the three CRUVI High Speed connectors can be utilized in that way. See TEB0707 CPLD Firmware.
X0 <= M_G1_01 ;
X2 <= M_G1_02 ;
X4 <= M_G1_03 ;
X6 <= M_G1_04 ;
...
Overview
Content Tools