Versions Compared
Key
- This line was added.
- This line was removed.
- Formatting was changed.
Page properties | ||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||
Design Name is always "TE Series Name" + Design name, for example "TE0720 Test Board"
|
Custom_table_size_100 |
---|
Page properties | ||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||
Important General Note:
|
Overview
Scroll Ignore | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Refer to http://trenz.org/te0720-info for the current online version of this manual and other available documentation.
Key Features
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Excerpt |
---|
|
Revision History
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Scroll Title | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Release Notes and Know Issues
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Scroll Title | ||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||
|
Requirements
Software
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Scroll Title | |||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||
|
Hardware
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Complete List is available on "<project folder>\board_files\*_board_files.csv"
Design supports following modules:
Scroll Title | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
*used as reference |
Design supports following carriers:
Scroll Title | ||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||
*used as reference |
Additional HW Requirements:
Scroll Title | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||
|
Content
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
For general structure and usage of the reference design, see Project Delivery - Xilinx devices
Design Sources
Scroll Title | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||
|
Additional Sources
Scroll Title | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||
|
Prebuilt
Page properties | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Notes :
|
Scroll Title | |||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||
|
Download
Reference Design is only usable with the specified Vivado/Vitis/PetaLinux version. Do never use different Versions of Xilinx Software for the same Project.
Page properties | ||||
---|---|---|---|---|
| ||||
|
Reference Design is available on:
Design Flow
Scroll Ignore | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Note |
---|
Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch. |
See also:
The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.
TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/Vitis GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality
Note |
---|
Caution! Win OS has a 260 character limit for path lengths which can affect the Vivado tools. To avoid this issue, use Virtual Drive or the shortest possible names and directory locations for the reference design (for example "x:\<project folder>") |
Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
Code Block language bash theme Midnight title _create_win_setup.cmd/_create_linux_setup.sh ------------------------Set design paths---------------------------- -- Run Design with: _create_win_setup -- Use Design Path: <absolute project path> -------------------------------------------------------------------- -------------------------TE Reference Design--------------------------- -------------------------------------------------------------------- -- (0) Module selection guide, project creation...prebuilt export... -- (1) Create minimum setup of CMD-Files and exit Batch -- (2) Create maximum setup of CMD-Files and exit Batch -- (3) (internal only) Dev -- (4) (internal only) Prod -- (c) Go to CMD-File Generation (Manual setup) -- (d) Go to Documentation (Web Documentation) -- (g) Install Board Files from Xilinx Board Store (beta) -- (a) Start design with unsupported Vivado Version (beta) -- (x) Exit Batch (nothing is done!) ---- Select (ex.:'0' for module selection guide):
- Press 0 and enter to start "Module Selection Guide"
- Createproject and follow instructions of the product selection guide, settings file will be configured automatically during this process.
optional for manual changes: Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
Note Note: Select correct one, see also Vivado Board Part Flow
Create hardware description file (.xsa file) for PetaLinux project and export to prebuilt folder
Code Block language py theme Midnight title run on Vivado TCL (Script generates design and export files into "<project folder>\prebuilt\hardware\<short name>") TE::hw_build_design -export_prebuilt
Info Using Vivado GUI is the same, except file export to prebuilt folder.
- Create and configure your PetaLinux project with exported .xsa-file, see PetaLinux KICKstart
- use TE Template from "<project folder>\os\petalinux"
use exported .xsa file from "<project folder>\prebuilt\hardware\<short name>" . Note: HW Export from Vivado GUI creates another path as default workspace.
The build images are located in the "<plnx-proj-root>/images/linux" directory
Configure the boot.scr file as needed, see Distro Boot with Boot.scr
- Copy PetaLinux build image files to prebuilt folder
copy u-boot.elf, image.ub and boot.scr from "<plnx-proj-root>/images/linux" to prebuilt folder
Info "<project folder>\prebuilt\os\petalinux\<ddr size>" or "<project folder>\prebuilt\os\petalinux\<short name>"
Page properties hidden true id Comments This step depends on Xilinx Device/Hardware
for Zynq-7000 series
- copy u-boot.elf, image.ub and boot.scr from "<plnx-proj-root>/images/linux" to prebuilt folder
for ZynqMP
- copy u-boot.elf, bl31.elf, image.ub and boot.scr from "<plnx-proj-root>/images/linux" to prebuilt folder
for ...
- ...
Generate Programming Files with Vitis
Code Block language py theme Midnight title run on Vivado TCL (Script generates applications and bootable files, which are defined in "test_board\sw_lib\apps_list.csv") TE::sw_run_vitis -all TE::sw_run_vitis (optional; Start Vitis from Vivado GUI or start with TE Scripts on Vivado TCL)
Note TCL scripts generate also platform project, this must be done manually in case GUI is used. See Vitis
Launch
Scroll Ignore | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Programming
Note |
---|
Check Module and Carrier TRMs for proper HW configuration before you try any design. |
Get prebuilt boot binaries
- Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
- Press 0 and enter to start "Module Selection Guide"
- Select assembly version
- Validate selection
Select create and open delivery binary folder
Info Note: Folder "<project folder>\_binaries_<Article Name>" with subfolder "boot_<app name>" for different applications will be generated
QSPI-Boot mode
Option for Boot.bin on QSPI Flash and image.ub and boot.scr on SD or USB.
- Connect JTAG and power on carrier with module
Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
Code Block language py theme Midnight title run on Vivado TCL (Script programs BOOT.bin on QSPI flash) TE::pr_program_flash -swapp u-boot TE::pr_program_flash -swapp hello_te0720 (optional)
Note To program with Vitis/Vivado GUI, use special FSBL (fsbl_flash) on setup
- Copy image.ub and boot.scr on SD or USB
- use files from "<project folder>\_binaries_<Article Name>\boot_linux" from generated binary folder,see: Get prebuilt boot binaries
- or use prebuilt file location, see "<project folder>\prebuilt\file_location.txt"
- Set Boot Mode to QSPI-Boot and insert SD or USB.
- Depends on Carrier, see carrier TRM.
SD-Boot mode
- Copy image.ub, boot.src and Boot.bin on SD
- use files from "<project folder>\_binaries_<Article Name>\boot_linux" from generated binary folder, see: Get prebuilt boot binaries
- or use prebuilt file location, see "<project folder>\prebuilt\file_location.txt"
- Set Boot Mode to SD-Boot.
- Depends on Carrier, see carrier TRM.
- Insert SD-Card in SD-Slot.
JTAG
Not used on this Example.
Usage
- Prepare HW like described on section 68616214 Programming
- Connect UART USB (most cases same as JTAG)
Select SD Card as Boot Mode (or QSPI - depending on step 1)
Info Note: See TRM of the Carrier, which is used.
Tip Starting with Petalinux version 2020.1, the industry standard "Distro-Boot" boot flow for U-Boot was introduced, which significantly expands the possibilities of the boot process and has the primary goal of making booting much more standardised and predictable.
The boot options described above describe the common boot processes for this hardware; other boot options are possible.
For more information see Distro Boot with Boot.scrPower On PCB
Expand title boot process 1. Zynq Boot ROM loads FSBL from SD/QSPI into OCM,
2. FSBL init PS, programs PL using the bitstream and loads U-boot from SD into DDR,
3. U-boot loads Linux (image.ub) from SD/QSPI/... into DDR
Page properties hidden true id Comments This step depends on Xilinx Device/Hardware
for Zynq-7000 series
1. Zynq Boot ROM loads FSBL from SD/QSPI into OCM,
2. FSBL init the PS, programs the PL using the bitstream and loads U-boot from SD/QSPI into DDR,
3. U-boot loads Linux (image.ub) from SD/QSPI/... into DDR
for ZynqMP???
1. ZynqMP Boot ROM FSBL from QSPI into OCM,
2. FSBL init the PS, programs the PL using the bitstream and loads PMU, ATF and U-boot from SD/QSPI into DDR,
3. U-boot loads Linux (image.ub) from SD/QSPI/... into DDR
for native FPGA
...
Linux
- Open Serial Console (e.g. putty)
- Speed: 115200
select COM Port
Info Win OS, see device manager, Linux OS see dmesg |grep tty (UART is *USB1)
Linux Console:
Code Block language bash theme Midnight petalinux login: root Password: root
Info Note: Wait until Linux boot finished
You can use Linux shell now.
Code Block language bash theme Midnight i2cdetect -y -r 0 (check I2C 0 Bus) i2cdetect -y -r 1 (check I2C 1 Bus) dmesg | grep rtc (RTC check) udhcpc (ETH0 check) lsusb (USB check)
- Option Features
- Webserver to get access to Zynq
- insert IP on web browser to start web interface
- init.sh scripts
- add init.sh script on SD, content will be load automatically on startup (template included in "<project folder>\misc\SD")
- Webserver to get access to Zynq
Vivado HW Manager
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Monitoring: PHY LED
Scroll Title | ||||||
---|---|---|---|---|---|---|
| ||||||
System Design - Vivado
Scroll Ignore | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Block Design
Scroll Title | ||||||
---|---|---|---|---|---|---|
| ||||||
PS Interfaces
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Activated interfaces:
Scroll Title | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||||||||
|
Constrains
Basic module constrains
Code Block | ||||
---|---|---|---|---|
| ||||
# # Common BITGEN related settings for TE0720 SoM # set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design] set_property CONFIG_VOLTAGE 3.3 [current_design] set_property CFGBVS VCCO [current_design |
Code Block | ||||
---|---|---|---|---|
| ||||
# set_property BITSTREAM.CONFIG.UNUSEDPIN PULLUP [current_design] |
Design specific constrain
Code Block | ||||
---|---|---|---|---|
| ||||
# # Constraints for System controller support logic # set_property PACKAGE_PIN K16 [get_ports PL_pin_K16] set_property PACKAGE_PIN K19 [get_ports PL_pin_K19] set_property PACKAGE_PIN K20 [get_ports PL_pin_K20] set_property PACKAGE_PIN L16 [get_ports PL_pin_L16] set_property PACKAGE_PIN M15 [get_ports PL_pin_M15] set_property PACKAGE_PIN N15 [get_ports PL_pin_N15] set_property PACKAGE_PIN N22 [get_ports PL_pin_N22] set_property PACKAGE_PIN P16 [get_ports PL_pin_P16] set_property PACKAGE_PIN P22 [get_ports PL_pin_P22] # # If Bank 34 is not 3.3V Powered need change the IOSTANDARD # set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_P22] set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_P16] set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_N22] set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_N15] set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_M15] set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_L16] set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_K20] set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_K19] set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_K16] |
Software Design - Vitis
Scroll Ignore | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
For Vitis project creation, follow instructions from:
Application
Page properties | ||||
---|---|---|---|---|
| ||||
---------------------------------------------------------- FPGA Example scuMCS Firmware to configure SI5338 and Reset System. srec_spi_bootloaderTE modified 2020.2 SREC Bootloader to load app or second bootloader from flash into DDR Descriptions:
xilisf_v5_11TE modified 2020.2 xilisf_v5_11
---------------------------------------------------------- Zynq Example: fsblTE modified 2020.2 FSBL General:
Module Specific:
fsbl_flashTE modified 2020.2 FSBL General:
ZynqMP Example: ---------------------------------------------------------- zynqmp_fsblTE modified 2020.2 FSBL General:
Module Specific:
zynqmp_fsbl_flashTE modified 2020.2 FSBL General:
zynqmp_pmufwXilinx default PMU firmware. ---------------------------------------------------------- General Example: hello_te0820Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output. u-bootU-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin. |
fsbl
TE modified 2020.2 FSBL
General:
- Modified Files: main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
Add Files: te_fsbl_hooks.h/.c (for hooks and board)
- General Changes:
- Display FSBL Banner and Device ID
Module Specific:
- Add Files: all TE Files start with te_*
- READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
- CPLD access
- Read CPLD Firmware and SoC Type
- Configure Marvell PHY
- USB PHY Reset
- Configure LED usage
fsbl_flash
TE modified 2020.2 FSBL
General:
- Modified Files: main.c
- General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
hello_te0720
Hello World App in Endless loop.
u-boot
U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.
Software Design - PetaLinux
Scroll Ignore | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
For PetaLinux installation and project creation, follow instructions from:
Config
Start with petalinux-config or petalinux-config --get-hw-description
Changes:
- CONFIG_SUBSYSTEM_SERIAL_PS7_UART_0_SELECT=y
- CONFIG_SUBSYSTEM_SERIAL_IP_NAME="ps7_uart_0"
Note: for variants with 256MB DDR only, change NET Boot Address to 0x8000000 on boot.src file
U-Boot
Start with petalinux-config -c u-boot
Changes:
- CONFIG_QSPI_BOOT=y
- CONFIG_SD_BOOT=y
- CONFIG_ENV_IS_NOWHERE=y
- # CONFIG_ENV_IS_IN_SPI_FLASH is not set
Change platform-top.h:
Code Block | ||
---|---|---|
| ||
#include <configs/zynq-common.h> #include <configs/platform-auto.h> #define CONFIG_PREBOOT "echo U-BOOT for petalinux;echo importing env from FSBL shared area at 0xFFFFFC00; if itest *0xFFFFFC00 == 0xCAFEBABE; then echo Found valid magic; env import -t 0xFFFFFC04; fi;setenv preboot; echo; dhcp" |
Device Tree
Code Block | ||
---|---|---|
| ||
/include/ "system-conf.dtsi" / { }; /* default */ /* QSPI PHY */ &qspi { #address-cells = <1>; #size-cells = <0>; status = "okay"; flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; #address-cells = <1>; #size-cells = <1>; }; }; /* ETH PHY */ &gem0 { phy-handle = <&phy0>; mdio { #address-cells = <1>; #size-cells = <0>; phy0: phy@0 { compatible = "marvell,88e1510"; device_type = "ethernet-phy"; reg = <0>; }; }; }; /* USB PHY */ /{ usb_phy0: usb_phy@0 { compatible = "ulpi-phy"; //compatible = "usb-nop-xceiv"; #phy-cells = <0>; reg = <0xe0002000 0x1000>; view-port = <0x0170>; drv-vbus; }; }; &usb0 { dr_mode = "host"; //dr_mode = "peripheral"; usb-phy = <&usb_phy0>; }; /* I2C need I2C1 connected to te0720 system controller ip */ &i2c1 { iexp@20 { // GPIO in CPLD #gpio-cells = <2>; compatible = "ti,pcf8574"; reg = <0x20>; gpio-controller; }; iexp@21 { // GPIO in CPLD #gpio-cells = <2>; compatible = "ti,pcf8574"; reg = <0x21>; gpio-controller; }; rtc@6F { // Real Time Clock compatible = "isl12022"; reg = <0x6F>; }; }; |
FSBL patch
Must be add manually, see template
Kernel
Start with petalinux-config -c kernel
Changes:
- CONFIG_RTC_DRV_ISL12022=y
Rootfs
Start with petalinux-config -c rootfs
Changes:
- CONFIG_i2c-tools=y
- CONFIG_busybox-httpd=y (for web server app)
- CONFIG_packagegroup-petalinux-utils(util-linux,cpufrequtils,bridge-utils,mtd-utils,usbutils,pciutils,canutils,i2c-tools,smartmontools,e2fsprogs)
Applications
See "<project folder>\os\petalinux\project-spec\meta-user\recipes-apps\"
startup
Script App to load init.sh from SD Card if available.
webfwu
Webserver application suitable for Zynq access. Need busybox-httpd
Additional Software
Scroll Ignore | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Page properties | ||||
---|---|---|---|---|
| ||||
Note: |
No additional software is needed.
Appx. A: Change History and Legal Notices
Scroll Ignore | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Document Change History
To get content of older revision got to "Change History" of this page and select older document revision number.
Page properties | ||||
---|---|---|---|---|
| ||||
|
Scroll Title | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Legal Notices
Include Page | ||||
---|---|---|---|---|
|
Scroll Only | ||
---|---|---|
|
Scroll pdf ignore | ||||||
---|---|---|---|---|---|---|
|