Versions Compared

Old Version 16

changes.mady.by.user Thomas Dück

Saved on

compared with

New Version 17

changes.mady.by.user Thomas Dück

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Page properties
hiddentrue
idComments

Design Name always "TE Series Name" + Design name, for example "TEI0006 Test Board"

202204211 2102280
DateVersionChangesAuthor
2023-09-132.3
  • update to
  • 22.x
  •  "select COM Port" → Linux command changed
TD
2022-06-152.
  • add yocto to
    • Overview → Key Features
    • Overview → Requirements
    • Design Flow
    • Launch
  • add section 'Software Design - Yocto'
TD
2021-06-151.2
  • table of content view
  • template history
  • placed a horizontal separation line under each chapter heading
  • replaced <design name> by <project folder>
  • changed title-alignment for tables from left to center
  • update 19.x to 20.x
JH,TD
2020-11-241.1
  • add fix table of content
  • add table size as macro
JH
--1.0----

Custom_table_size_100

2
  • add 'QSPI-Boot mode'
  • add 'Get prebuilt boot binaries'
  • changed SD-Boot mode chapter
  •  'Device Tree' chapter expanded
TD
2022-04-212.1
  • update to 21.x
TD
2022-02-282.0
  • add yocto to
    • Overview → Key Features
    • Overview → Requirements
    • Design Flow
    • Launch
  • add section 'Software Design - Yocto'
TD
2021-06-151.2
  • table of content view
  • template history
  • placed a horizontal separation line under each chapter heading
  • replaced <design name> by <project folder>
  • changed title-alignment for tables from left to center
  • update 19.x to 20.x
JH,TD
2020-11-241.1
  • add fix table of content
  • add table size as macro
JH
--1.0----


Custom_table_size_100

Page properties
hiddentrue
idComments

Important General Note:

  • Export PDF to download, if quartus revision is changed!

  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

      • Figure template (note: inner scroll ignore/only only with drawIO object):

Page properties
hiddentrue
idComments

Important General Note:

  • Export PDF to download, if quartus revision is changed!

  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

      • Figure template (note: inner scroll ignore/only only with drawIO object):

Scroll Title
anchorFigure_xyz
titleText
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, use

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Table template:

  • Layout macro can be use for landscape of large tables
    • Set column width manually(can be used for small tables to fit over whole page) or leave empty (automatically)

    Scroll Title
    anchorTableFigure_xyz
    titleText


    scroll-
    tablelayout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    stylewidths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue
    ExampleComment
    12
  • ...

    • Overview

        • ignore

          Create DrawIO object here: Attention if you copy from other page, use


          Scroll Only

          image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed



        • Table template:

          • Layout macro can be use for landscape of large tables
          • Set column width manually(can be used for small tables to fit over whole page) or leave empty (automatically)


        • Scroll Title
          anchorTable_xyz
          titleText

          Scroll Table Layout
          orientationportrait
          sortDirectionASC
          repeatTableHeadersdefault
          style
          widths
          sortByColumn1
          sortEnabledfalse
          cellHighlightingtrue

          ExampleComment
          12



    • ...

    Overview

    Scroll Ignore
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue


    Page properties
    hiddentrue
    idComments

    Notes :

    • short

    Scroll Ignore
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue
    Page properties
    hiddentrue
    idComments

    Notes :

    NIOS II Design Nios V/m design example with SDRAM controller (AXI4), flash memory test , 3-axis Accelerometer and different LED sequences.

    Refer to http://trenz.org/max1000-info for the current online version of this manual and other available documentation.

    Key Features

    Page properties
    hiddentrue
    idComments

    Notes :

    • Add basic key futures, which can be tested with the design


    Excerpt

    Revision History

    Page properties
    hiddentrue
    idComments

    Notes :

    • add every update file on the download
    • add design changes on description


    Scroll Title
    anchorTable_DRH
    title-alignmentcenter
    titleDesign Revision History

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    2022042121211020220421150137211020220421150228 212012021070911372720120210709113644 20
  • TE scripts update
    • 1919020201019101714190202010191016512020-
    DateQuartusProject BuiltAuthorsDescription
    2024-02-0522.1 Lite

    TEI0001-test_board_noprebuilt-quartus_

    22.

    1std.

    2-

    20240205175122.zip

    TEI0001-test_board-quartus_

    22.

    1std.

    2-

    20240205175203.zip

    		Thomas Dück
    • update to Quartus Prime Lite
    • 22.1
    • new board variants
    • change to Nios V/m
    • TE scripts update
    2022-04-2121.1 Lite2021-07-0920.1 Lite

    TEI0001-test_board_noprebuilt-quartus_

    21.1.

    0-

    20220421150137.zip

    TEI0001-test_board-quartus_

    21.1.

    0-

    20220421150228.zip

    		Thomas Dück
    • update to Quartus Prime Lite
    • 21.1
    2021-07-09202020-10-19.1 Lite

    TEI0001-test_board_noprebuilt-quartus_

    20.1.

    1-

    20210709113727.zip

    TEI0001-test_board-quartus_

    20.1.

    1-

    20210709113644.zip

    		Thomas Dück
    • update to Quartus Prime Lite 20.1
    • TE scripts update
    2020-10-1919.1 Lite

    TEI0001-test_board_noprebuilt-quartus_19.1.0-20201019101714.zip

    TEI0001-test_board-quartus_19.1.0-20201019101651.zip

    		Thomas Dück
    • bugfixes
    2020-
    • bugfixes
    		07-0719.1 Lite

    TEI0001-test_board_noprebuilt-quartus_19.1.0-20200707153033.zip

    TEI0001-test_board-quartus_19.1.0-20200707153205.zip

    		Thomas Dück
    • bugfixes
    • script update
    2020-05-1219.1 Lite

    TEI0001-test_board_noprebuilt-quartus_19.1.0-20200512095852.zip

    TEI0001-test_board-quartus_19.1.0-20200512100037.zip

    		Thomas Dück
    • 19.1 update
    2019-11-1118.1

    TEI0001-test_board_noprebuilt-quartus_18.1-20191111104201.zip

    TEI0001-test_board-quartus_18.1-20191111104348.zip

    		Thomas Dück
    • add bash files for Linux OS
    2019-10-2818.1

    TEI0001-test_board_noprebuilt-quartus_18.1-20191028120819.zip

    TEI0001-test_board-quartus_18.1-20191028120521.zip

    		Thomas Dück
    • create project with TE scripts
    • new assembly variants
    2019-04-0218.1TEI0001-03-08-C8-test_board-quartus_18.1-20190402.zipThomas Dück
    • initial release


    Release Notes and Know Issues

    Page properties
    hiddentrue
    idComments
    Notes :
    • add known Design issues and general notes for the current revision
    • do not delete known issue, add fixed version time stamp if  issue fixed


    Scroll Title
    anchorTable_KI
    title-alignmentcenter
    titleKnown Issues

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    IssuesDescriptionWorkaroundTo be fixed version
    No known issues---------


    Requirements

    Software

    Page properties
    hiddentrue
    idComments

    Notes :

    • list of software which was used to generate the design


    Scroll Title
    anchorTable_SW
    title-alignmentcenter
    titleSoftware

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    optional
    SoftwareVersionNote
    Quartus Prime Lite2122.11stdneededNios V license is needed. For more information see: Intel Nios V Processors
    RiscFree IDE for Intel FPGAs22.1stdneededNIOS II SBT for eclipse---


    Hardware

    Page properties
    hiddentrue
    idComments

    Notes :

    • list of hardware which was used to generate the design
    • mark the module and carrier board, which was used tested with an *
    Complete List is available on <project folder>/board_files/*_devices.csv

    Design supports following modules:

    Scroll Title
    anchorTable_HWM
    title-alignmentcenter
    titleHardware Modules

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    08_C8_8MB0316_C8_8MB, REV0364MBitNANA16C8A16_C8A_32MB32MByte64MBitNA
    Module ModelBoard Part Short NamePCB Revision SupportDDRQSPI Flash memoryOthersNotes
    TEI0001-0302-08-C8*DBC83REV02, REV038MByte8Mbyte64MBit8MbyteNA--NA--
    TEI0001-02-16-C8FBC83REV028MByte8Mbyte8Mbyte----
    TEI0001-03-08-C8DBC83REV038MByte8Mbyte--NA

    *used as reference

    Design supports following carriers:

    Scroll Title
    anchorTable_HWC
    title-alignmentcenter
    titleHardware Carrier
    Scroll Table LayoutorientationportraitsortDirectionASCrepeatTableHeadersdefaultstylewidthssortByColumn1sortEnabledfalsecellHighlightingtrueCarrier ModelNotes---

    *used as reference

    Additional HW Requirements:

    Scroll Title
    anchorTable_AHW
    title-alignmentcenter
    titleAdditional Hardware
    Scroll Table LayoutorientationportraitsortDirectionASCrepeatTableHeadersdefaultstylewidthssortByColumn1sortEnabledfalsecellHighlightingtrueAdditional HardwareNotesUSB cable for JTAG/UARTCheck Carrier Board and Programmer for correct type
    --
    TEI0001-03-16-C8FBC83REV038MByte8Mbyte--

    --

    TEI0001-03-16-C8AFBC84REV0332MByte8Mbyte----
    TEI0001-03-DBC83ADBC83REV038Mbyte8Mbyte----
    TEI0001-03-FBC83AFBC83REV038Mbyte8Mbyte----
    TEI0001-03-FBC84AFBC84REV0332MByte8Mbyte----
    TEI0001-04-DBC83ADBC83REV048Mbyte8Mbyte--

    --

    TEI0001-04-FBC83AFBC83REV048Mbyte8Mbyte----
    TEI0001-04-FBC84AFBC84REV0432MByte8Mbyte----

    *used as reference

    Design supports following carriers:

    Scroll Title
    anchorTable_HWC
    title-alignmentcenter
    titleHardware Carrier

    scroll-

    *used as reference

    Content

    Page properties
    hiddentrue
    idComments

    Notes :

    • content of the zip file

    For general structure and of the reference design, see Project Delivery - Intel devices

    Design Sources

    Location
    Scroll Title
    anchorTable_DS
    title-alignmentcenter
    titleDesign sources

    scroll-tablelayout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    		Type
    Carrier ModelNotes
    Quartus

    <project folder>/source_files/quartus

    <project folder>/source_files/<Board Part Short Name>/quartus

    Quartus project will be generated by TE Scripts

    Source files for specific assembly variants

    Software

    <project folder>/source_files/software

    <project folder>/source_files/<Board Part Short Name>/software

    Additional software will be generated by TE Scripts

    Source files for specific assembly variants

    Prebuilt

    ---

    *used as reference

    Additional HW Requirements:

    Scroll Title
    anchorTable_AHW
    title-alignmentcenter
    titleAdditional Hardware
    Page properties
    hiddentrue
    idComments

    Notes :

  • prebuilt files
    • Template Table:
    Scroll Title
    anchorTable_PF
    titlePrebuilt files
    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    File

    File-Extension

    Description

    SOPC Information File*.sopcinfoFile with description of the .qsys file to create software for the target hardwareSRAM Object File*.sofRam configuration fileProgrammer Object File*.pofFPGA configuration fileJTAG Indirect Configuration file*.jicFlash configuration fileRaw binary file*.rbfFPGA configuration fileDiverse Reports---Report files in different formatsSoftware-Application-File*.elfSoftware application for NIOS II processor system
    Additional HardwareNotes
    Micro USB cable for JTAG/UART--

    *used as reference

    Content

    Page properties
    hiddentrue
    idComments

    Notes :

    • content of the zip file

    For general structure and of the reference design, see Project Delivery - Intel devices

    Design Sources

    Scroll Title
    anchorTable_PFDS
    title-alignmentcenter
    titlePrebuilt files (only on ZIP with prebuilt content)Design sources

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    FileTypeFile-ExtensionLocationDescriptionNotes
    SOPC Information File*.sopcinfoFile with description of the *.qsys file to create software for the target hardware
    Programmer Object File*.pofFPGA configuration file
    Diverse Reports---Report files in different formats
    Software Application File*.elfSoftware application for NIOS II processor system

    Download

    Reference Design is only usable with the specified Quartus version. Do never use different versions of Quartus software for the same project.

    Page properties
    hiddentrue
    idComments

    Reference Design is available on:

    Design Flow

    Scroll Ignore
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue
    Quartus

    <project folder>/source_files/quartus

    Quartus project will be generated by TE Scripts

    Software

    <project folder>/source_files/software

    Additional software will be generated by TE Scripts


    Prebuilt

    Page properties
    hiddentrue
    idComments

    Notes :

    • prebuilt files
    • Template Table:


      • Scroll Title
        anchorTable_PF
        titlePrebuilt files

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefault
        style
        widths
        sortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        File

        File-Extension

        Description

        SOPC Information File*.sopcinfoFile with description of the .qsys file to create software for the target hardware
        SRAM Object File*.sofRam configuration file
        Programmer Object File*.pofFPGA configuration file
        JTAG Indirect Configuration file*.jicFlash configuration file
        Raw binary file*.rbfFPGA configuration file
        Diverse Reports---Report files in different formats
        Software-Application-File*.elfSoftware application for Nios II/Nios V processor system

        Device Tree

        		*.dtbDevice tree blob
        SFP-File*.sfpBoot image with SPL (Secondary Program Loader)
        BIN-File*.binImage with linux kernel and ram disk
        CONF-File*.confBoot configuration file (extlinux.conf)
        Yocto linux image*.wicLinux image for SD card




    Scroll Title
    anchorTable_PF
    title-alignmentcenter
    titlePrebuilt files (only on ZIP with prebuilt content)

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    File

    File-Extension

    Description

    SOPC Information File*.sopcinfoFile with description of the *.qsys file to create software for the target hardware
    Programmer Object File*.pofFPGA configuration file
    Diverse Reports---Report files in different formats
    Software Application File*.elfSoftware application for NIOS II processor system
    BIN-File*.binImage of the software application for flash memory


    Download

    Reference Design is only usable with the specified Quartus version. Do never use different versions of Quartus software for the same project.

    Page properties
    hiddentrue
    idComments

    Reference Design is available on:

    Design Flow

    Scroll Ignore
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue


    Page properties
    hiddentrue
    idComments
    Notes :

    • Basic Design Steps

    • Add/ Remove project specific description


    Note

    Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.

    Trenz Electronic provides a tcl based built environment based on Quartus Design Flow.

    See also:


    The Trenz Electronic FPGA Reference Designs are TCL-script based projects. To create a project, open a project or program a device execute "create_project_win.cmd" on Windows OS and "create_project_linux.sh" on Linux OS.

    TE Scripts are only needed to generate the quartus project, all other additional steps are optional and can also executed by Intel Quartus/SDK GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery - Intel devices → Currently limitations of functionality

    1. Open create_project_win.cmd/create_project_linux.sh:
      Image Added
    2. Select Board in "Board selection"
    3. Click on "Create project" button to create project
      1. (optional for manual changes) Select correct quartus installation path in "<project folder>/settings/design_basic_settings.tcl"

    Launch

    Scroll Ignore
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue


    Page properties
    hiddentrue
    idComments

    Note:

    • Programming and Startup procedure

    Programming

    Note

    Check Module and Carrier TRMs for proper HW configuration before you try any design.

    Get prebuilt boot binaries

    Note

    Reference Design is also available with prebuilt files. It's recommended to use TE prebuilt files for first launch.

    1. Run
    Page properties
    hiddentrue
    idComments
    Notes :

    • Basic Design Steps

    • Add/ Remove project specific description

    Note

    Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.

    Trenz Electronic provides a tcl based built environment based on Quartus Design Flow.

    See also:

    The Trenz Electronic FPGA Reference Designs are TCL-script based projects. To create a project, open a project or program a device execute "create_project_win.cmd" on Windows OS and "create_project_linux.sh" on Linux OS.

    TE Scripts are only needed to generate the quartus project, all other additional steps are optional and can also executed by Intel Quartus/SDK GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery - Intel devices → Currently limitations of functionality

    1. Open create_project_win.cmd/create_project_linux.sh:Image Removed
    2. Select Board in "Board selection"
    3. Click on "Create project" button to create project
      1. (optional for manual changes) Select correct quartus installation path in "<project folder>/settings/design_basic_settings.tcl"

    Launch

    Scroll Ignore
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue
    1. Module in 'Board selection'
    2. Click on 'Export prebuilt files' button
      1. Folder <project folder>/_binaries_<Article Name> with subfolder programming_files will be generated and opened

    MAX10 and flash memory

    1. Connect the Module to USB-Port
    2. Open create_project_win.cmd/create_project_linux.sh
    3. Select correct board in "Board selection"
    4. Click on "Program device" button
      1. if prebuilt files are available: select "Program prebuilt file"
        1. Note: With this selection, the MAX10 is programmed with the pof file and the flash memory is also programmed with the bin file
      2. using own generated programming file: select "Program other file" and click on "Browse ..." to open own generated programming file
      3. (optional): click on "Open programmer GUI" to program device with Quartus programmer GUI
    5. Click on "Start program device" button

    Flash memory only

    Page properties
    hiddentrue
    idComments

    Note:

    • Programming and Startup procedure

    Programming

    Note

    Check Module and Carrier TRMs for proper HW configuration before you try any design.

    MAX10 Flash

    1. Connect the Module to USB-Port
    2. Open create_project_win.cmd/create_project_linux.sh
    3. Select correct board in "Board selection"
    4. Click on "Program device" button
      1. if prebuilt files are available: select "Program prebuilt file"using own generated programming file: select "Program other file" and click on "Browse ..." to open own generated programming file(optional) click on "Open programmer GUI" to program device with Quartus programmer GUIthe bin file
    5. Click on "Start program device" button

    JTAG

    Not used on this example.

    Usage

    1. Prepare Hardware like described on section Programming
    2. Connect UART USB (most cases same as JTAG)

    UART

    1. Open Serial Console (e.g. PuTTY)

      1. select COM Port

        Info

        Win OS: see device manager

        Linux OS: see  dmesg | grep tty  (UART is *USB1)


      2. Speed: 115200
    2. Press reset button (Note: The Nios V needs some seconds to load the software project from the flash memory)
    3. Console output depends on used Software project, see Software Design - SDK#Application

    System Design - Quartus

    Scroll Ignore
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue


    Page properties
    hiddentrue
    idComments

    Note:

    • Description of Block Design - Project, Block Design - Platform Desginer, ... Block Design Pictures from Export...

    Block Design

    The block designs may differ depending on the assembly variant.

    Scroll Title
    anchorFigure_BD
    title-alignmentcenter
    titleBlock Design - Project



    Scroll Title
    anchorFigure_BD
    title-alignmentcenter
    titleBlock Design - Platform Designer

    Software Design - SDK

    Scroll Ignore
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue


    Page properties
    hiddentrue
    idComments
    Note:

    • optional chapter separate

    • sections for different apps

    Application

    Page properties
    hiddentrue
    idComments

    ----------------------------------------------------------

    General Example:

    hello_tei0006

    Hello TEI0006 is a Quartus Hello World example as endless loop instead of one console output.


    Used software project depends on board assembly variant. Template location: <project folder>/source_files/software/

    test_

    board

    tei0001

    Software example to test TEI0001 module.

    • You can toggle between following modes by pressing user button
      1. Spirit levelWinbond SPI flash memory test
      2. Pulse-width modulation sequence
      3. Shift register sequence
      4. Knightrider sequence
      5. Case statement sequence


    Appx. A: Change History and Legal Notices

    Scroll Ignore
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue

    Document Change History

    To get content of older revision got to "Change History" of this page and select older document revision number.

    Page properties
    hiddentrue
    idComments
    • Note this list must be only updated, if the document is online on public doc!
    • It's semi automatically, so do following

      • Add new row below first

      • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

      • Metadata is only used of compatibility of older exports


    Scroll Title
    anchorTable_dch
    title-alignmentcenter
    titleDocument change history.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths2*,*,3*,4*
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DateDocument Revision

    Authors

    		Description

    Page info
    infoTypeModified date
    dateFormatyyyy-MM-dd
    typeFlat

    Page info
    infoTypeCurrent version
    dateFormatyyyy-MM-dd
    prefixv.
    count1
    typeFlat

    Page info
    infoTypeModified by
    typeFlat

    • update to Quartus Prime Lite 22.1
    2022-06-15v.16Thomas Dück
    • update to Quartus Prime Lite 21.1
    2021-07-09v.14Thomas Dück
    • update to Quartus Prime Lite 20.1
    • document style update
    • script update
    2020-10-09v.12Thomas Dück
    • bugfixes
    • script update
    2020-05-13v.10Thomas Dück
    • 19.1 release
    2019-11-11v.8Thomas Dück
    • add bash files for Linux OS
    2019-10-29v.6Thomas Dück
    • change design to TE scripts
    • new variants
    2019-04-03v.4Thomas Dück
    • Initial release 18.1
    --


    		all

    Page info
    infoTypeModified users
    dateFormatyyyy-MM-dd
    typeFlat

    		--


    Legal Notices

    Include Page
    IN:Legal Notices
    IN:Legal Notices


    Scroll Only


    HTML
    <style>
.wiki-content .columnLayout .cell.aside {
width: 0%;
}</style>



    Scroll pdf ignore


    Custom_fix_page_content

    Table of contents

    Table of Contents
    outlinetrue