Page properties |
---|
|
- Module: TRM Name always "TE Series Name" +TRM
Example: "TE0728 TRM"
Template Change history: Date | Version | Changes | Author |
---|
| 4.2 | | ED |
| 4.1 | | ED |
| 4.0 | - Rework for smaller TRM which can be generated faster
- Reduce Signal Interfaces Pin
- Reduce On Board Periphery
- Reduce Power
- Move Configuration Signals from Overview to own section
| JH |
| 3.12 | - Version History
- changed from list to table
- all
- changed title-alignment for tables from left to center
| ma |
| 3.11 | - update "Recommended Operating Conditions" section
|
|
| 3.1 | - New general notes for temperature range to "Recommended Operating Conditions"
|
|
| 3.02 | - add again fix table of content with workaround to use it for pdf and wiki
- Export Link for key features examples
- Notes for different Types (with and without Main FPGA)
- Export Link for Signals, Interfaces and Pins examples
- Notes for different Types (Modul, Modul Hybrid, Evalboard, Carrier)
|
|
| 3.01 | - remove fix table of content and page layout ( split page layout make trouble with pdf export)
- changed and add note to signal and interfaces, to on board periphery section
- ...(not finished)
|
|
| 3.00 | - → separation of Carrier/Module and evaluation kit TRM
|
|
| 2.15 | - add excerpt macro to key features
|
|
| 2.14 | - add fix table of content
- add table size as macro
|
|
|
Page properties |
---|
|
Important General Note:
|
Page properties |
---|
|
----------------------------------------------------------------------- |
Page properties |
---|
|
Note for Download Link of the Scroll ignore macro: |
Overview
The Trenz Electronic TEB2000 carrier board provides functionality for development, evaluation and testing purposes of Trenz 4 x 5 cm SoMs (System on Module).
The carrier board is equipped with a broad range of various components and connectors for different configuration setups and needs. On-module functional components and multipurpose I/Os of the SoM's logic are connected via board-to-board connectors to the carrier board components and connectors for easy user access.
See page "4 x 5 SoM Carriers" for more information about the SoM's supported by the TEB2000 Carrier Board.
Refer to http://trenz.org/teb2000-info for the latest online version of this manual and other available documentation.
Key Features
Excerpt |
---|
- On Board:
- System Controller (SC) (LCMXO2-1200HC-4TG144I1))
- Mini USB for JTAG and UART connection (FTDI FT2232H)
- Mini USB second UART connection (FTDI FT230XQ)
- SDIO port expander
- 4 x User LEDs
- D1, D2 connected to SC (firmware-dependent functionality)
- D3, D4 connected to SC and 4 x 5 SoM
- 2 x User push button
- Connected to SC (firmware-dependent functionality)
- Currently used for Hard- and Soft-Reset
- 4 User DIP switches
- Enable/disable update of the SC
- MIO0 (accessible signal by SC and SoM)
- 2 "mode" bits
- Interface:
- Trenz 4 x 5 SoM socket
- 3 x Samtec LSHM series high-speed connectors
- Micro SD card connector
- 2 x VG96 backplane connectors assembly option (mounting holes and solder pads)
- Mini or Normal USB for SoM USB-OTG connection 1)
- RJ45 GbE connector
- Power:
- Overvoltage-, undervoltage- and reversed- supply-voltage-protection
- Barrel jack (2.1 mm) for 5V power supply input
- Dimension:
- Notes
1)Depends on assembly variant |
Block Diagram
Page properties |
---|
|
add drawIO object in Scroll Ignore section and add reference image in Scroll Only.
Note |
---|
Title (not anchor) of all Scroll Title such as DrawIOs and Tables should be changed according to the Module name. Example: TE0812 Block Diagram |
Note |
---|
All created DrawIOs should be named according to the Module name: Example: DrawIO of TE0812 Block Diagram should be named TE0812_OV_BD |
|
Scroll Title |
---|
anchor | Figure_OV_BD |
---|
title-alignment | center |
---|
title | TEB2000 block diagram |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | truefalse |
---|
| |
---|
diagramName | TEB2000_OV_BD |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramDisplayName | |
---|
lbox | true |
---|
diagramWidth | 642 |
---|
height | 902630 |
---|
revision | 1314 |
---|
|
|
Scroll Only |
---|
|
|
Main Components
Page properties |
---|
|
Notes : - Picture of the PCB (top and bottom side) with labels of important components
- Add List below
|
Scroll Title |
---|
anchor | Figure_OV_MC |
---|
title-alignment | center |
---|
title | TEB2000 main components |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | truefalse |
---|
| |
---|
diagramName | TEB2000-01_Figure_OV_MC |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramDisplayName | |
---|
lbox | true |
---|
diagramWidth | 641 |
---|
height | 814 |
---|
revision | 45 |
---|
|
|
Scroll Only |
---|
|
|
- System Controller (SC), U5
- USB-to-JTAG/UART-FTDI, U4
- USB-to-UART-FTDI, U12
- UART Level Shifter, U8
- SDIO Port Expander, U2
- I²C Repeater, U7
- Power Input Protection, U11
- DCDC, U3
- USB Power Supply Switch, U1
- Reset / Push button, S1, S6
- 4x Dip Switch, S2
- LED D1 (red), D2 (green)
- LED D3 (red), D4 (green)
- Ethernet Jack, J14
- Samtec Razor Beam™ LSHM-150/130 B2B connector, JB1, JB2, JB3
- Assembly option for VG96 Connector, J1, J2
- Power Jack, J13
- microSD Card Socket, J3
- Bank IO Voltages jumper, J5, J8, J9, J10
- Mini USB Type B Jack, J4 (FT2232H), J21 (FT230XQ)
- USB Host Connector, J6 (USB A) or J12 (Micro USB)
Initial Delivery State
Page properties |
---|
|
Note |
---|
Only components like EEPROM, QSPI flash can be initialized by default at manufacture. If there is no components which might have initial data ( possible on carrier) you must keep the table empty |
|
Scroll Title |
---|
anchor | Table_OV_IDS |
---|
title-alignment | center |
---|
title | Initial delivery state of programmable devices on the module |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Storage device name | Content | Notes |
---|
EEPROM | Preprogrammed with Microchip programmer license | Do not overwrite! | System Controller | Preprogrammed with Firmware | Visit TEB2000 Firmware for further information.
|
|
Signals, Interfaces and Pins
Connectors
Scroll Title |
---|
anchor | Table_SIP_C |
---|
title-alignment | center |
---|
title | Board Connectors |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Connector Type | Designator
| Interface | IO CNT | Notes |
---|
VG96 | J1 | JB1 - IO | 48 SE / 24 DIFF |
| VG96 | J1 | JB3 - IO | 36 SE / 18 DIFF |
| VG96 | J1 | B2B/SC - I²C | 2 |
| Micro USB Type A/B 1) | J12 | JB3 - USB 2.0 OTG | 2 |
| RJ-45 Ethernet
| J14 | B2B - ETH | 8 |
| RJ-45 Ethernet | J14 | SC - ETH LED | 4 |
| VG96 | J2 | JB2 - IO | 65 SE / 32 DIFF |
| VG96 | J2 | SC - IO | 16 |
| Mini USB Type B | J21 | SC - USB 2.0 | 2 |
| microSD Card socket | J3 | SDIO | SDIO 2) |
| Mini USB Type B | J4 | FTDI - USB 2.0 | 2 |
| USB Type A 1) | J6 | JB3 - USB 2.0 OTG | 2 |
| B2B
| JB1
| J1 - IO
| 48 SE / 24 DIFF |
| B2B
| JB1
| 2 x UART or 4 x IO
| 4
|
| B2B | JB1 | I2C or 2 x IO
| 2 |
| B2B | JB1 | SC - IO | 2 |
| B2B | JB1 | SDIO | SDIO 2) or 6 x IO |
| B2B | JB1 | ETH - MDI | ETH |
| B2B | JB2 | J2 - IO | 65 SE / 32 DIFF |
| B2B | JB2 | SC - JTAG | 4 |
| B2B | JB2 | SC - Reset | 1 |
| B2B | JB2 | 2 x LED or 2 x IO | 2 |
| B2B | JB3 | J1 - IO | 36 SE / 18 DIFF |
| B2B | JB3 | USB | USB |
|
1) Depending on the variant only one of the USB connectors is assembled. 2) Depending on firmware microSD Card socket is connected to SC or SoM. Refer to TEB2000 CPLD Firmware for further information. |
Test Points
Page properties |
---|
|
you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delete the Test Point section. Example: Test Point | Signal | Notes1) |
---|
TP1 | PWR_PL_OK |
|
1) Direction: - IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.
|
Scroll Title |
---|
anchor | Table_SIP_TPs |
---|
title-alignment | center |
---|
title | Test Points Information |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Test Point | Signal | Notes |
---|
TP1 | 5VIN |
| TP2 | 5VIN |
| TP3 | VIN |
| TP4 | VIN |
| TP5 | 3.3V |
| TP6 | 3.3V |
| TP7 | VCCIOA |
| TP8 | VCCIOA |
| TP9 | VCCIOB |
| TP10 | VCCIOB |
| TP11 | VCCIOC |
| TP12 | VCCIOC |
| TP13 | VCCIOD |
| TP14 | VCCIOD |
| TP15 | M1.8VOUT |
| TP16 | M1.8VOUT |
| TP17 | M3.3VOUT |
| TP18 | M3.3VOUT |
| TP19 | UART_VBUS |
| TP20 | UART_VBUS |
| TP21 | VCCJTAG |
| TP22 | VCCJTAG |
| TP23 | 3.3V_SD |
| TP24 | 3.3V_SD |
| TP25 | USB-VBUS_R |
| TP26 | USB-VBUS_R |
| TP27 | ETH-VCC |
| TP28 | ETH-VCC |
| TP29 | Vbus |
| TP30 | Vbus |
| TP31 | CM1 |
| TP32 | CM0 |
| TP33 | MIO0 |
| TP34 | JTAGEN |
|
|
On-board Peripherals
Page properties |
---|
|
Notes : In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection by assigning advance link using: #NameOfTheSection Example: Chip/Interface | Designator | Connected To | Notes |
---|
ETH PHY | U10 | | Gigabit ETH PHY |
|
Scroll Title |
---|
anchor | Table_OBP |
---|
title-alignment | center |
---|
title | On board peripherals |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Chip/Interface | Designator | Connected To | Notes |
---|
System Controller | U5 | - B2B Connector
- FTDI (FT2232H) U4
- FTDI (FT230XQ) U12
- SD Port Expander U2
- Push button S1
- DIP Switch S2
- All LEDs
| Visit TEB2000 CPLD Firmware for further information. | FTDI FT2232H | U4 | | JTAG/UART for Application | FTDI FT230XQ | U12 | | UART for HSS/System Boot
| EEPROM | U10 | | Preprogrammed with Microchip programmer license. Do not overwrite! | SD IO Port Expander | U2 | - SC
- B2B Connector JB1
- microSD Card J3
|
| I2C Repeater | U7 | |
| Oscillator | U6 | | 12 MHz |
|
Configuration and System Control Signals
Page properties |
---|
|
- Overview all Controller signals, like Reset, Boote Mode, JTAG Interface(Connector or USB In case of FTDI)...
- In case it's connected to CPLD always link to CPLD description and add not from the current implementation here(in case it's available)
|
Scroll Title |
---|
anchor | Table_OV_CNTRL |
---|
title-alignment | center |
---|
title | Controller signal. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Signal Name | Connector.Pin | Direction1) | Description |
---|
S1 | S1.2 / S1.4 | IN | Push button 2) | SRST | S6.2 / S6.4 | IN | Push button | SRST | JB2.56 | OUT | Push button | CM1 | S2.8 | IN | DIP Switch 2) | CM0 | S2.7 | IN | DIP Switch 2) | JTAGEN | S2.6 | IN | DIP Switch 2) | MIO0 | S2.5 | IN | DIP Switch 2) | VCCIOA | J5.2 | IN | SoM IO Bank supply 3) | VCCIOB | J8.2 | IN | SoM IO Bank supply 3) | VCCIOC | J9.2 | IN | SoM IO Bank supply 3) | VCCIOD | J10.2 | IN | SoM IO Bank supply 3) | SD_CD | J3.9 | IN | SD Card socket Detect Signal | VBUS_V_EN | JB3.54 | IN | Enables USB Host Bus Voltage | USB-VBUS | JB3.56 | OUT | Signal to SoM | RESIN | JB2.17 | OUT | Reset signal 2)
| EN1 | JB1.27 | OUT | Power enable signal 2)
| PGOOD | JB1.29 | INOUT | Power good and/or Boot mode select signal 2) | MODE | JB1.31 | INOUT | Boot mode select signal 2) | NOSEQ | JB1.8 | INOUT | Power Management and/or Select JTAG target on the SoM 2) | PROGMODE | JB1.90 | INOUT | Select JTAG target on the SoM 2) | MIO14 / MIO15 | JB1.91 / JB1.86 | INOUT | UART to SoM (FT2230H) 2) | MIO12 / MIO13 | JB1.100 / JB1.98 | INOUT | UART to SoM (FT230XQ) 2)
| MIO10-SCL / MIO10 MIO10-SDA / MIO11 | J1A.A1 / JB1.96 J1A.A2 / JB1.94 | INOUT | I2C bus 2) | TMS_B / TDI_B / TDO_B / TCK_B | JB2.94 / JB2.96 / JB2.98 / JB2.100 | Signal-dependent | JTAG configuration and debugging interface. JTAG reference voltage: VCCJTAG |
1) Direction: - IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.
2) Firmware dependent. Refer to TEB2000 CPLD Firmware for further information. 3) Select 1.8V or 3.3V via jumper. Refer to 4 x 5 Module Integration Guide for further information. |
Power and Power-On Sequence
Page properties |
---|
|
Enter the default value for power supply and startup of the module here. - Order of power provided Voltages and Reset/Enable signals
Link to Schematics, for power images or more details |
Power Rails
Page properties |
---|
|
List of all power rails which are accessible by the customer - Main Power Rails and Variable Bank Power
|
Scroll Title |
---|
anchor | Table_PWR_PR |
---|
title-alignment | center |
---|
title | Module power rails. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Power Rail Name/ Schematic Name | Connector.Pin | Direction1) | Notes |
---|
5VIN | J13.1 | IN |
| 5VIN | J2A.A1 / J2A.A2 | OUT |
| 3.3V | J1C.C31 / J2C.C31 / JB1.2 / JB1.4/ JB1.6/ JB1.14/ JB1.16 / JB2.1 / JB2.3 / JB2.5 / JB2.7 | OUT |
| USB-VBUS_R | J6.1 / J12.1 | OUT |
| USB-VBUS | JB3.56 | OUT |
| M1.8VOUT | JB1.40 | IN |
| M1.8VOUT | J5.3 / J8.3 / J9.3 / J10.3 | OUT |
| M3.3VOUT | JB2.9 / JB2.11 | IN |
| M3.3VOUT | J5.1 / J8.1 / J9.1 / J10.1 / J1C.C32 / J2C.C32 | OUT |
| VCCJTAG | JB2.92 | IN |
| ETH-VCC | JB1.13 | IN |
| ETH-VCC | J14A.1 | OUT |
| VCCIOA | JB1.10 / JB1.12 / J1B.B1 | OUT | Selection via J5 2) | VCCIOB | JB2.2 / JB2.4 / J1B.B32 | OUT | Selection via J8 2) | VCCIOC | JB2.6 / J2B.B32
| OUT | Selection via J9 2) | VCCIOD | JB2.8 / JB2.10 / J2B.B1 | OUT | Selection via J10 2) |
1) Direction: - IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.
2) Select 1.8V or 3.3V via jumper. Refer to 4 x 5 Module Integration Guide for further information. |
Recommended Power up Sequencing
Page properties |
---|
|
List baseboard design hints for final baseboard development. |
Scroll Title |
---|
anchor | Table_BB_DH |
---|
title-alignment | center |
---|
title | Baseboard Design Hints |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Sequence | Net name | Recommended Voltage Range | Pull-up/down | Description | Notes |
---|
0 | - | - | - | Configuration signal setup. | See Configuration and System Control Signals. | 1 | 5VIN | 5 V (± 5 %) | - | Main Power supply. | Carrier and SoM power supply. Minimal 1 A, maximal 4A. Power consumption depends mainly on design and cooling solution. | 2 | M3.3VOUT / M1.8VOUT | 3.3 V (± 3 %) / 1.8 V (± 3 %) | - | SoM generated output voltages. | These voltages can be used - to supply bank voltages,
- to supply periphery and/or
- as power good signal to enable external power regulators.
Important: Consider maximum power consumption. | 3 | - | - | - | Apply voltages to Carrier powered external IO when voltages under point 2 are present. |
|
|
Board to Board Connectors
Page properties |
---|
|
- This section is optional and only for modules.
use "include page" macro and link to the general B2B connector page of the module series, For example: 6 x 6 SoM LSHM B2B Connectors
Include Page |
---|
| 6 x 6 SoM LSHM B2B Connectors |
---|
| 6 x 6 SoM LSHM B2B Connectors |
---|
|
|
Include Page |
---|
| 4 x 5 SoM LSHM B2B Connectors |
---|
| 4 x 5 SoM LSHM B2B Connectors |
---|
|
Technical Specifications
Page properties |
---|
|
List of all power rails which are accessible by the customer - Main Power Rails and Variable Bank Power add boarder one time maximum Rating (Board will damaged)
This Table shows the real values and reasons for the limits, so that they do not get lost. Power Rail / Schematic Name | Description | Min | Max | Unit | Notes | Reason for the limit |
---|
SD Card Limits | Limits for 3.3 V and 1.8 V SD Card supply. Only Recommanded values are given. | Rec: 2.7 1.7 | Rec: 3.6 1.95 | V | Supplied by M3.3VOUT and optional by M1.8VOUT, when SD IO Jumper is to 1.8 V. |
|
|
|
|
|
|
|
| 5VIN | Carrier supply voltage rail before the input protection. | Abs: -40 Rec: 4.75 | Abs: 60 Rec: 5.5 | V | Voltages outside of the range 4.06 to 5.58 V will trigger the input protection. Rec.= USB Bus Voltage |
| VCCIOA | SoM IO Bank Voltage. | - | - | V | Voltage can be supplied by M1.8VOUT, M3.3VOUT or externally by VG96 IO. |
| VCCIOB | SoM IO Bank Voltage. | - | - | V | Voltage can be supplied by M1.8VOUT, M3.3VOUT or externally by VG96 IO. |
| VCCIOC | SoM and Carrier Sc IO Bank 2 voltage. | Abs: -0.5 Rec: 1.14 | Abs: 3.75 Rec: 3.6 | V | Voltage can be supplied by M1.8VOUT, M3.3VOUT or externally by VG96 IO. System Controller Limits: Abs: -0.5 to 3.75 Rec VCC: 2.375 to 3.6 Rec IO: 1.14 to 3.6 | Limited by Absolute Maximum Values of the Sc. | VCCIOD | SoM IO Bank Supply Voltage. | - | - | V | Voltage can be supplied by M1.8VOUT, M3.3VOUT or externally by VG96 IO. |
| M1.8VOUT | SoM supplied voltage. Range based on Carrier (± 3 %). Consult SoM requirements.
| Abs: -0.3 | Abs: 4.9 | V | When suppling SC IO Bank 2 via VCCIOC, the limit ist -0.5 to 3.75 V. |
| M3.3VOUT | SoM supplied voltage. | Abs: -0.5 | Abs: 4.6 | V | When suppling SC IO Bank 2 via VCCIOC, the limit ist -0.5 to 3.75 V. When suppling a SD Card, SD Card limits are 2.7 to 3.6 V. | M3.3VOUT is limited by U2 in the range -0.5 to 4.6 V. | VBAT | Dependent on SoM requirements. | - | - | V |
|
| VCCJTAG | SoM supplied JTAG Reference Voltage for Carrier SC IO Bank 3. | Abs: -0.5 | Abs: 3.75 | V | System Controller Limits: Abs: -0.5 to 3.75 Rec VCC: 2.375 to 3.6 Rec IO: 1.14 to 3.6 | Limited by Absolute Maximum Values of the Sc. | ETH-VCC | ETH Bias Voltage from SoM. | - | - | V |
|
|
|
Absolute Maximum Ratings *)
Scroll Title |
---|
anchor | Table_TS_AMR |
---|
title-alignment | center |
---|
title | Absolute maximum ratings |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Power Rail / Schematic Name | Description | Min | Max | Unit |
---|
5VIN | Main input power supply | -0.3 | 60 | V | VCCIOA 1) 2) | Module power supply. | - | - | V | VCCIOB 1) 2) | Module power supply. | - | - | V | VCCIOC 1) 2) | Module and Carrier power supply. | -0.5 | 3.75 | V | VCCIOD 1) 2) | Module power supply. | - | - | V | M1.8VOUT | Module and carrier power supply. | -0.3 | 1.95 | V | M3.3VOUT | Module and carrier power supply. | -0.3 | 3.6 | V | VCCJTAG | JTAG Reference Voltage | -0.5 | 3.75 | V | ETH-VCC | Power supply for ETH connection. | - | - | V |
1) Module-dependent. 2) Voltage is intended to be supplied by M1.8VOUT or M3.3VOUT but can also be supplied externally via VG96 connection. |
*) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.
Recommended Operating Conditions
This TRM is generic for all variants. Temperature range can differ depending on assembly variant. The voltage ranges between variants should not be affected (exceptions are possible, depending on custom request)
Temperature Range:
This carrier board is capable of being operated at industrial-grade temperatures, which cover at least the range of -40 °C to 85 °C.
Please check the operating temperature range of the mounted SoM and peripheral devices, which determines the operating temperature range of the overall system.
The operating temperature range depends on software and hardware design and cooling solution. Please contact us for options.
Voltage Rails:
Scroll Title |
---|
anchor | Table_TS_ROC |
---|
title-alignment | center |
---|
title | Recommended operating conditions. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Power Rail / Schematic Name | Description | Min | Max | Unit | Notes |
---|
5VIN | Main input power supply | 4.75 | 5.25 | V |
| VCCIOA 1) 2) | Module power supply. | - | - | V |
| VCCIOB 1) 2) | Module power supply. | - | - | V |
| VCCIOC 1) 2) | Module and Carrier power supply. | 1.14 | 3.6 | V |
| VCCIOD 1) 2) | Module power supply. | - | - | V |
| M1.8VOUT | Module and carrier power supply. | 1.746 | 1.854 | V |
| M3.3VOUT | Module and carrier power supply. | 3.201 | 3.399 | V |
| VCCJTAG | JTAG Reference Voltage | 1.14 | 3.6 | V |
| ETH-VCC | Power supply for ETH connection. | - | - | V |
|
|
Physical Dimensions
Carrier size: 100 mm x 64.5 mm.
Note that few parts are slightly hanging over the PCB edge. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 8 mm.
PCB thickness: 1.64 mm ± 10 %.
Scroll Title |
---|
anchor | Figure_TS_PD |
---|
title-alignment | center |
---|
title | Physical Dimension |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
| |
---|
diagramName | TEB2000-01-Figure_TS_PD |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramDisplayName | |
---|
lbox | true |
---|
diagramWidth | 641 |
---|
height | 752 |
---|
revision | 1 |
---|
| Image Removed |
Scroll Only |
---|
scroll-pdf | true |
---|
scroll-office | true |
---|
scroll-chm | true |
---|
scroll-docbook | true |
---|
scroll-eclipsehelp | true |
---|
scroll-epub | true |
---|
scroll-html | true |
---|
| Image RemovedImage Added |
|
Currently Offered Variants
Scroll Title |
---|
anchor | Table_VCP_SO |
---|
title-alignment | center |
---|
title | Trenz Electronic Shop Overview |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
|
Revision History
Hardware Revision History
The hardware revision number is on the PCB adjacent to the module identifier, separated by a dash.
Scroll Title |
---|
anchor | Figure_RV_HRN |
---|
title-alignment | center |
---|
title | Board hardware revision number. |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
| |
---|
diagramName | TEB2000-01_Figure_RH_HRN |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramDisplayName | |
---|
lbox | true |
---|
diagramWidth | 641 |
---|
height | 506 |
---|
revision | 1 |
---|
| Image Removed |
Scroll Only |
---|
Image RemovedImage Added |
|
Scroll Title |
---|
anchor | Table_RH_HRH |
---|
title-alignment | center |
---|
title | Hardware Revision History |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
|
Document Change History
Page properties |
---|
|
- Note this list must be only updated, if the document is online on public doc!
- It's semi automatically, so do following
Add new row below first Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template - Metadata is only used of compatibility of older exports
|
Scroll Title |
---|
anchor | Table_RH_DCH |
---|
title-alignment | center |
---|
title | Document change history. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Date | Revision | Contributor | Description |
---|
Page info |
---|
infoType | Modified date |
---|
dateFormat | yyyy-MM-dd |
---|
type | Flat |
---|
|
| Page info |
---|
infoType | Current version |
---|
prefix | v. |
---|
type | Flat |
---|
showVersions | false |
---|
|
| Page info |
---|
infoType | Modified by |
---|
type | Flat |
---|
showVersions | false |
---|
|
| | 2024-08-26 | v.27 | Kilian Jahn | | -- | all | Page info |
---|
infoType | Modified users |
---|
type | Flat |
---|
showVersions | false |
---|
|
| |
|
Disclaimer
Include Page |
---|
| IN:Legal Notices |
---|
| IN:Legal Notices |
---|
|