Page History
...
| LED | Color | Connected to | Description and Notes |
|---|---|---|---|
| D1 | Green | PS MIO7 | User LED. |
| D2 | Green | PL IO_L3P_T0_34 | User LED. |
| D3 | Red | PL IO_L4N_T0_34 | User LED. |
Table 11: On-board LEDs.
Pin Header
Optional assembled Pin Header J2 can be used for PMIC In-System Programming.
Pin | Signal | B2B |
|---|---|---|
| J2-1 | VIN | J1-154, J1-156, J1-158, J1-160 |
| J2-2 | GND | |
J2-3 | I2C_SCL | J1-142 |
| J2-4 | I2C_SDA | J1-144 |
| J2-5 | ONKEY | J1-148 |
| J2-6 | PWR_TP | J1-146 |
Table 12: Optional assembled Pin Header.
Power and Power-On Sequence
...
| Power Input | Typical Current |
|---|---|
| VIN | TBD* |
Table 1213: Typical power consumption.
...
Power Rail Name | B2B JM1 Pins | Direction | Notes |
|---|---|---|---|
| VIN | 154, 156, 158,160 | Input | Main supply voltage from the carrier board. |
| VCCIO_35 | 54 | Input | PL Bank 35 supply voltage. |
| VLDO1 | 83 | Output | 3.3V (100mA) |
| VLDO2 | 94 | Output | 1.8V (300mA) |
| VLDO34 | 53 | Output | 2.5V (600mA) |
| 3.3V | 43, 74 | Output | Additional module on-board 3.3V voltage supply (1A). |
| 1.0V | - | Buck1 & Buck2 of U4. | |
| 1.8V | - | Buck3 of U4. | |
| VDD_DDR | - | DDR supply voltage powered by Buck4 of U4. | |
VBAT | 152 | Output | Battery charger to the carrier board. |
Table 1314: Module power rails.
Current rating of theSamtec connector is 1.5A per pin (1 pin powered per row).
...
Bank | Schematic Name | Voltage | Voltage Range |
|---|---|---|---|
| 500 MIO | 1.8V | 1.8V | - |
| 501 MIO | 1.8V | 1.8V | - |
| 502 DDR3 | VDD_DDRV | 1.35V | - |
| 34 HP | 3.3V | 3.3V | - |
| 35 HP | VCCIO_35 | User | 1.2V to 3.3V |
Table 1415: Module PL I/O bank voltages.
...
Order | REF Number | Samtec Number | Type | Mated Height | Data sheet | Comment |
|---|---|---|---|---|---|---|
| - | REF-192552-02 | ST5-80-1.50-L-D-P-TR | Module connector | 4 mm | http://suddendocs.samtec.com/catalog_english/st5.pdf | Standard connector used on module |
| 27219 | REF-192552-01 | SS5-80-3.50-L-D-K-TR | Baseboard connector | 4 mm | http://suddendocs.samtec.com/catalog_english/ss5.pdf | Standard connector used on board |
Table 1516: Connectors for module and baseboard.
| Connector Specifications | Value |
|---|---|
| Insulator material | Liquid crystal polymer |
| Stacking height | 4 mm |
| Contact material | Phosphor-bronze |
| Plating | Au or Sn over 50 μ" (1.27 μm) Ni |
| Current rating | 1.6 A per pin (2 pins powered) |
| Operating temperature range | -55 °C to +125 °C |
| RoHS compliant | Yes |
Table 1617: Module connector specifications.
...
Parameter | Min | Max | Units | Reference Document |
|---|---|---|---|---|
VIN supply voltage | -0.3 | 5.5 | V | da9062_3v4.pdf |
Storage temperature | -40 | 85 | °C | - |
Table 1518: Module absolute maximum ratings.
...
| Parameter | Min | Max | Units | Reference Document |
|---|---|---|---|---|
| VIN supply voltage | 3.6 | 5.5 | V | |
| Operating temperature | -40 | 85 | °C |
Table 1619: Module recommended operating conditions.
...
| Date | Revision | Notes |
|---|---|---|
| 02A | Electrical same as REV 02. | |
| 02 | First production release | |
| - | 01 | Prototypes |
Table 1720: Module hardware revision history.
...
Date | Revision | Contributors | Description | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Initial document. | |||||||||||||||||
all | Jan Kumann, Ali Naseri, John Hartfiel |
Table 1821: Document change history.
...
Overview
Content Tools