Page History
...
| Bank | Type | Connector | Signal Count | Voltage | Notes |
|---|---|---|---|---|---|
| 34 | HR | J1 | 6 | 3.3 | D8 .. 13, SDA, SCL |
| 34 | HR | J2 | 8 | 3.3 | D2 .. 7, RXD, TXD |
| 34 | HR | J6 | 8 | 3.3 | PIO01 .. PIO08 |
| 35 | HR | J4 | 7 | 3.3 | AIN0 .. 5 |
| 35 | HR | J5 | 1 | 3.3 | ESP_GPIO2 |
| 500 | MIO | J10 | 6 | 3.3 | SDCARD |
| 501 | MIO | J5 | 4 | 3.3 | ESP_RXD, ESP_TXD, ESP_GPIO0, MOD_RST |
Table x: .
JTAG Interface
JTAG access to the Xilinx Zynq XC7Z010 SoC is provided through testpoints TP1-T4.
...
| Signal | Zynq SoC Pin | Connected To |
|---|---|---|
| SDA | R13 | J1-9 |
| SCL | P13 | J1-10 |
Table x: .
On-board Peripherals
Processing System (PS) Peripherals
| Name | IC | ID | PS7 | MIO | Notes |
|---|---|---|---|---|---|
| SPI Flash | S25FL127SABMFV10 | U5 | QSPI0 | MIO1 .. MIO6 | |
| LED | - | D1 | GPIO | MIO9 | |
| USB | USB3320 | U18 | USB0 | MIO28 .. MIO39 | |
| USB Reset | - | U18 | GPIO | MIO7 |
Table x: .
Clocking
| Clock Signal | Frequency | IC | Signal, Pin |
|---|---|---|---|
Processing system (PS) reference clock. | 52.000000 MHz | U1 | PS_CLK, C7 |
USB transceiver reference clock. | 52.000000 MHz | U18 | OTG-RCLK, 26 |
| High-speed USB to multipurpose UART/FIFO oscillator input. | 12.000000 MHz | U3 | OSCI, 3 |
Table x: .
On-board LEDs
| LED | Color | Connected To | Description and Notes |
|---|---|---|---|
| D2 | Red | MIO9, U1 | |
| D6 | Green | Bank 34, U1 | FPGA_LED |
| D7 | Green | 3.3V | PWR_LED |
Table x: .
Power and Power-On Sequence
...
Parameter | Min | Max | Units | Reference Document |
|---|---|---|---|---|
VIN supply voltage | -0.5 | 3.6 | V | Xilinx datasheet DS187, "Zynq-7000 All Programmable SoC: DC and AC Switching Characteristics". |
Storage temperature | -40 | +85 | °C |
Table x: .
Recommended Operating Conditions
| Parameter | Min | Max | Units | Reference Document |
|---|---|---|---|---|
| Supply voltage | 1.14 | 3.465 | V | Xilinx datasheet DS187, "Zynq-7000 All Programmable SoC: DC and AC Switching Characteristics". |
Table x: .
| Note |
|---|
| Assembly variants for higher storage temperature range are available on request. |
...
Please note that two different units are used on the figures below, SI system millimeters (mm) and imperial system thousandths of an inch(mil). To convert mils to millimeters and vice versa use formula 100mil's = 2,54mm.
Figure 3: TE0723 module physical dimensions.
Operating Temperature Ranges
...
| Date | Revision | Notes | PCN | Documentation Link |
|---|---|---|---|---|
| 2016-07-15 | 03 | Click to see PCN. | TE0723-03 | |
2015-11-06 | 02 | TE0723-02 | ||
01 |
|
Table x: TE0723 hardware revision history.
Hardware revision number is printed on the PCB board together with the module model number separated by the dash.
...
Date | Revision | Contributors | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Jan Kumann | Initial document. |
Table x: Document change history.
Disclaimer
| Include Page | ||||
|---|---|---|---|---|
|
Overview
Content Tools