Page History

...

1QSPIU51SP0CS5SPI0DQ03U52U57277293345

MIO	Function	Connected To	Notes	MIO	Function	Connected To	Notes
0	SDCARD	J10-9	Card detect switch.	28	USB-OTG	U18-	7	OTG-	DATA42
1	QSPI	U5-	1	SP0-	CS	29	QSPIUSB-OTG	U18-	31	SPI0OTG-DQ1DIR4
2	QSPI	U5-35	SPI0-DQ2DQ05	30	QSPIUSB-OTG	U18-	29	SPI0OTG-DQ3STP6
3	QSPI	U5-62	SPI0-SCKDQ17	31	GPIOUSB-OTG	U18-	USB PHY reset
9	LED	D2	Red LED
10	SDCARD	J10-7	DAT0
11	SDCARD	J10-3	CMD
12	SDCARD	J10-5	CLK
13	SDCARD	J10-8	DAT1
14	SDCARD	J10-1	DAT2
15	SDCARD	J10-2	CD/DAT3
2	OTG-NXT
4	QSPI	U5-3	SPI0-DQ2	32	28	USB-OTG	U18-	3	OTG-DATA4DATA029
5	USB-OTGQSPI	U18U5-317	OTGSPI0-DIRDQ330	33	USB-OTG	U18-	4	OTG-STPDATA131
6	USB-OTGQSPI	U18U5-26	OTGSPI0-NXTSCK32	34	USB-OTG	U18-	5	OTG-DATA0DATA233
7	USB-OTGGPIO	U18-4	OTG-DATA1	27	USB PHY reset	35	USB-OTG	U18-	6	OTG-DATA2DATA335
9	USB-OTG	U18-6	LED	D2	Red LEDOTG-DATA3	36	USB-OTG	U18-1	OTG-CLK
10	SDCARD	J10-7	DAT0	37	USB-OTG	U18-9	OTG-DATA5
11	SDCARD	J10-3	CMD	38	USB-OTG	U18-10	OTG-DATA6
12	SDCARD	J10-5	CLK	39	USB-OTG	U18-13	OTG-DATA7
13	SDCARD	J10-8	DAT1	48	ESP	J5-2	ESP_TXD
14	SDCARD	J10-1	DAT2	49	ESP	J5-7	ESP_RXD
15	SDCARD	J10-2	CD/DAT3	52	ESP	J5-6	MOD_RST
				53	ESP	J5-3	ESP_GPIO0

I²C interface pins from the Zynq SoC PL bank 34 are connected to the connector J1. There are no on-board I2C slave devices.

...

Parameter	Min	Max	Units	Reference Document
VIN supply voltage	-0.5	3.6	V	Xilinx datasheet DS187, "Zynq-7000 All Programmable SoC: DC and AC Switching Characteristics".
Storage temperature	-40	+85	°C

...

Parameter	Min	Max	Units	Reference Document
Supply voltage	1.14	3.465	V	Xilinx datasheet DS187, "Zynq-7000 All Programmable SoC: DC and AC Switching Characteristics".

Table x: .

Note
Assembly variants for higher storage temperature range are available on request.

...

Versions Compared