Page History

...

The Trenz Electronic TEBF0808 Carrier Board is a baseboard for the Xilinx Zynq Ultrascale+ MPSoC modules TE0808 and TE0803, which exposes the module's B2B connector pins to accessible connectors and provides a whole range of on-board components to test and evaluate the Zynq Ultrascale+ SoMs and for developing purposes.

Key Features

• Mini-ITX form factor, PC Enclosure
• ATX Power power supply connector (Important 12V only Supply Required)
• optional 12V Standard Power Plug
• USB3 with USB3 HUB
• Gigabit Ethernet RJ45
• MicroSD Card (bootable)
• eMMC (bootable)
• PCIe slot - one PCIe lane (16 Lane Connector)
• Displayport Single Lane
• One SATA Connector
• FMC HPC Slot (1.8V max VCCIO)
• Dual SFP+
• One Samtec FireFly (4 GT lanes bidir)
• One Samtec FireFly connector for reverse loopback
• Fan connectors, PC Enclosure, FMC Fan
• Intel front panel connector (PWR/RST/LED)
• Intel HDA Audio connector
• CAN FD Transceiver (10 Pin IDC Connector)
• 20 Pin ARM JTAG Connector (PS JTAG0)

PC Enclosure Rear Panel Accessible I/O

• PCIe accepting 16 Lane PCIe cards (one lane used PS GT)
• FMC HPC
• Dual SFP+
• RJ45 Gigabit Ethernet
• 2x USB3 Host
• Displayport (Single lane)
• microSD
• Two LED's
• CAN FD (using DB9 to IDC10 Cable)
• One PMOD

PC Front Panel I/O

• Reset Button
• Power Button
• Power LED
• HD LED
• Intel HDA Audio
• One USB2 HS Host port
• One USB3 SS Host port

...

• Optional 12V standard power plug
• Headers
  • Intel 10-pin HDA Audio
  • Intel 9-pin Power-/Reset-Button, Power-/HD-LED
  • PC-BEEPER
• On-board Power- / Reset-Switches
• 2x Configuration DIP-switches
• 2x Optional 4-wire PWM fan connectors
• PCIe Slot - one PCIe lane (16 lane connector)
• CAN FD Transceiver (10 Pin IDC connector or 6-pin header)
• 4x On-board configuration EEPROMs
• Dual SFP+ Connector (2x1 Cage)
• One Display-Port (single lane)
• One SATA Connector
• 2x USB3.0 A Connector (Superspeed Host Port (Highspeed at USB2.0))
• 1x USB3.0 on-board header with two ports
• FMC HPC Slot (FMC_VADJ max. VCCIO)
• FMC Fan
• Gigabit Ethernet RGMII PHY with RJ45 MegJack
• All Carrier Board peripherals' I²C-interfaces muxed to MPSoC's I²C-interface on PS bank 503
• Quad programmable PLL clock generator SI5338A
• 2x SMA coaxial connectors for clock signals
• MicroSD- / MMC-Card Socket (bootable)
• 32 Gbit on-board eMMC memory (8 banks a 4 Gbit)
• Two System Controller CPLDs Lattice MachXO2 1200 HC
• One Samtec FireFly (4 GT lanes bidirectional)
• One Samtec FireFly connector for reverse loopback
• 2x JTAG/UART header ('XMOD FTDI JTAG Adapter'-compatible) for programming MPSoC and SC CPLDs
• 20 Pin ARM JTAG Connector (PS JTAG0)
• 3x PMOD connector (GPIO's and I²C interface to SC CPLDs / MPSoC module
• Carrier SC CPLD managing power-up sequence of MPSoC module
• On-board DCDC PowerSoCs

Additional assembly options are available for cost or performance optimization upon request.

...