Page History

...

1. PMOD connector, P2
2. MicroSD Card socket (on bottom side), J16
3. Display Port socket, J13
4. USB3.0 A 2x , RJ45 1x (stacked), J7
5. SFP+ 2x1 cage, J14
6. PCIe x16 connector (one PCIe lane connected), J11
7. FMC HPC, J5
8. FMC-Fan connector 5V, J19
9. USB3.0 connector, J8
10. PC-BEEPER 4-pin header, J23
11. SMA coaxial connector (SI5338A clock output), J32
12. SMA coaxial connector (clock input to MPSoC module), J33
13. eMMC Card socket, J27
14. Ultra fine 0.50 mm pitch, Razor Beam™ LP Slim Terminal Strip with 160 contacts, J4
15. Ultra fine 0.50 mm pitch, Razor Beam™ LP Slim Terminal Strip with 160 contacts, J1
16. Ultra fine 0.50 mm pitch, Razor Beam™ LP Slim Terminal Strip with 160 contacts, J3
17. Ultra fine 0.50 mm pitch, Razor Beam™ LP Slim Terminal Strip with 160 contacts, J2
18. CAN bus 6-pin header, J29
19. CAN bus 10-pin connector, J24
20. ARM-JTAG  20-pin connector, J30
21. ATX power supply connector, J20
22. 4-Wire PWM fan connector, J35
23. JTAG/UART header ('XMOD FTDI JTAG Adapter'-compatible) for access to MPSoC module, J12
24. JTAG/UART header ('XMOD FTDI JTAG Adapter'-compatible) for access to System Controller CPLDs, J28
25. Power Jack 2.1mm 12V, J25
26. 4x DIP-switch, S5
27. Power Button, S1
28. Samtec FireFly Connector  for reverse loopback, J21/J22
29. Samtec FireFly Connector (4 GT lanes bidirectional), J6/J15
30. SATA Header, J31
31. 4-Wire PWM fan connector, J26
32. Programmable on-module PLL I²C interface 10-pin header, J17
33. Reset Button, S2
34. INTEL HDA 9-pin header, J9
35. Intel front panel (PWR/RST/LED) 9-pin header, J10
36. Samtec FireFly Connector J6/J15 I²C interface 3-pin header, J34
37. 4x DIP-switch, S4
38. PMOD connector, P3
39. PMOD connector, P1
40. Battery Holder CR1220, B1

Initial Delivery State

Table 1: Initial Delivery State of the flash memories

Signals, Interfaces and Pins

...

I/O signals connected to the SoCs I/O bank and B2B connector: 

...