Page History

...

Include Page

	Lattice CPLD Firmware Update
	Lattice CPLD Firmware Update

CPLD Access

Connect MiniUSB cable to J28 XMOD (XMOD2 label)
Set DIP Switch S4-3 in ON position
Power ON the board (ATX Power or external 12V)
Run "Lattice Diamond Programmer"
Select "Create new project from JTAG chain" and press "OK"
After scan 2 MachXO2 devices should be detected in chain
Select "LCMXO2-1200HC" as "Device" for both columns.
In first column click to "File Name" and then to "...". Select "SCM_REV*.jed" file (Master CPLD File).
In second column click to "File Name" and then to "...". Select "SCS_REV06.jed" file (SlaveCPLD File).
Run "Design"->"Program" from main menu
Wait operations to complete

TEBF0808 CPLDs -Firmware description of Master an Slave CPLD
- TEBF0808 Master CPLD - Firmware description Master CPLD
- TEBF0808 Slave CPLD - Firmware description Slave CPLD
- Default delivered Firmware
- It's recommended to update always both CPLDs together