Page History

Board overview

The following table lists some boards for which you need to generate a .jic file to program the flash configuration device.

*Configuration sheme depends on current Firmware, see Firmware description

**for correct flash memory device see the schematics of the board

Convert .sof to .jic

Do following steps to convert the .sof file to .jic:

1. Compile your quartus project to generate a .sof file
2. Select "File → Convert Programming files" from the quartus top menu

3. Make the following settings in the "Convert Programming File" window

                 

   draw.io Diagram
   border false diagramName Conversion_Settings simpleViewer false width links auto tbstyle hidden diagramDisplayName lbox true diagramWidth 827 revision 2

   1. Programming file type: JTAG Indirect Configuration File (.jic)
   2. Configuration device: (see Board overview → Flash memory)
      (if the memory device is not listed click "..." button next to the dropdown menu, select correct Device family and in the Configuration Device section the correct memory device)
   3. Mode: Active Serial

   4. File name: specify the target directory and the output file name
      
      

      draw.io Diagram
      border false diagramName conversion_settings_2 simpleViewer false width links auto tbstyle hidden diagramDisplayName lbox true diagramWidth 809 revision 1

   5. Highlight "Flash Loader" in "Input files to convert" window

   6. Click "Add Device...", select correct Device family and Device name and click "OK"
      
      

      draw.io Diagram
      border false diagramName conversion_settings_3 simpleViewer false width links auto tbstyle hidden diagramDisplayName lbox true diagramWidth 810 revision 1

   7. Highlight "SOF Data" in "Input files to convert" window

   8. Click "Add File...", browse to the .sof file you want to convert and click "open"
      
      

      draw.io Diagram
      border false diagramName conversion_settings_4 simpleViewer false width links auto tbstyle hidden diagramDisplayName lbox true diagramWidth 807 revision 1

   9. Highlight selected .sof file

   10. Click "Properties", enable "Compression" and click "OK"
4. Click "Generate" to start converting the file

You can use the Quartus Programmer to program the flash configuration device with the .jic file.

References

• Intel Quartus Prime Pro Edition User Guide: Programmer