| Page properties |
|---|
|
Design Name is always "TE Series Name" + Design name, for example "TE0720 Test Board"
| Date | Version | Changes | Author |
|---|
| 2023-06-13 | 3.1.16 | - Design flow:
- added alternative programming files in Petalinux
- added chapter FSBL Patch in Software Design - Petalinux
| ma | | 2023-06-01 | 3.1.15 | - removed u-boot.dtb from Design flow
| ma | | 2023-06-01 | 3.1.14 | - expandable lists for revision history and supported hardware
| wh | | 2023-05-25 | 3.1.13 | - updated according to Vivado 2022.2
| ma | | 2023-02-08 | 3.1.12 | - removed content of
- Special FSBL for QSPI programming
| ma | | 2022-08-24 | 3.1.11 | - Modification from link "available short link"
| ma | | 2022-01-25 | 3.1.10 | - removed u-boot.dtb from QSPI-Boot mode and SD-Boot mode. Is implemented in BOOT.bin
- corrected Boot Source File in Boot Script-File
| ma | | 2022-01-14 | 3.1.9 | - extended notes for microblaze boot process with linux
- add u.boot.dtb to petalinux notes
- add dtb to prebuilt content
- replace 20.2 with 21.2
| jh | | 2021-06-28 | 3.1.8 | - added boot process for Microblaze
- minor typos, formatting
| ma | | 2021-06-01 | 3.1.7 | | jh | | 2021-05-04 | 3.1.6 | - removed zynq_ from zynq_fsbl
| ma | | 2021-04-28 | 3.1.5 | - added macro "Scroll ignore" for suppression of horizontal dividing lines during .pdf-export
- minor typos, formatting
| ma | | 2021-04-27 | 3.1.4 | - Version History
- changed from list to table
- Design flow
- removed step 5 from Design flow
- changed link from TE Board Part Files to Vivado Board Part Flow
- changed cmd shell from picture to codeblock
- added hidden template for "Copy PetaLinux build image files", depending from hardware
- added hidden template for "Power on PCB", depending from hardware
- Usage update of boot process
- Requirements - Hardware
- added "*used as reference" for hardware requirements
- all
- placed a horizontal separation line under each chapter heading
- changed title-alignment for tables from left to center
- all tables
- added "<project folder>\board_files" in Vivado design sources
| ma |
| 3.1.3 | | ma |
| 3.1.2 | - minor typing corrections
- replaced SDK by Vitis
- changed from / to \ for windows paths
- replaced <design name> by <project folder>
- added "" for path names
- added boot.
| src - scr description
- added USB for programming
| ma |
| 3.1.1 | - swapped order from prebuilt files
- minor typing corrections
- removed Win OS path length from Design flow, added as caution in Design flow
| ma |
| 3.1 | - Fix problem with pdf export and side scroll bar
- update 19.2 to 20.2
- add prebuilt content option
|
|
| 3.0 | - add fix table of content
- add table size as macro
- removed page initial creator
|
|
|
| Page properties |
|---|
|
Important General Note: Export PDF to download, if vivado revision is changed! Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro - Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
- ...
|
Overview
| Scroll Ignore |
|---|
| scroll-viewport | true |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
|
|
Refer to http://trenz.org/te0835-info for the current online version of this manual and other available documentation.
Key Features
| Page properties |
|---|
|
Notes : - Add basic key futures, which can be tested with the design
|
| Excerpt |
|---|
- Vitis/Vivado 20202022.2
- PetaLinux 2022.2
- RF Analyzer 20202023.21
- PCIe (endpoint)
- SD
- ETH
- USB
- I2C
- RTC
- FMeter
- Modified FSBL for SI5395 programming
- Special FSBL for QSPI programming
|
Revision History
| Page properties |
|---|
|
Notes : - add every update file on the download
- add design changes on description
|
| Expand |
|---|
|
| Scroll Title |
|---|
| anchor | Table_DRH |
|---|
| title-alignment | center |
|---|
| title | Design Revision History |
|---|
| | Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Date | Vivado | Project Built | Authors | Description |
|---|
| 2022- |
|
02242020| 2022.2 | TE0835-test_board_noprebuilt-vivado_ |
|
202092022022312314320230921095939.zip
TE0835-test_board-vivado_ |
|
202092022022312312420230921095939.zip | Mohsen Chamanbaz |
|
XCZU47DR variant was added.HDL files for XCZU25DR has | | 2022-02-24 | 2020.2 | TE0835-test_board_noprebuilt-vivado_2020.2-build_9_20220223123143.zip
TE0835-test_board-vivado_2020.2-build_9_20220223123124.zip | Mohsen Chamanbaz | - XCZU47DR variant was added.
- HDL files for XCZU25DR has been updated.
- RF analyzer software was updated to 2020.2 version.
| | 2022-02-11 | 2020.2 | TE0835-test_board_noprebuilt-vivado_2020.2-build_5_20220211054445.zip
TE0835-test_board-vivado_2020.2-build_5_20220211054430.zip | Mohsen Chamanbaz/John Hartfiel | - Bugfix, now with 20.2 FSBL
| | 2021-07-14 | 2020.2 | TE0835-test_board_noprebuilt-vivado_2020.2-build_5_20210714111839.zip
TE0835-test_board-vivado_2020.2-build_5_20210714111826.zip | Mohsen Chamanbaz | | | 2020-10-27 | 2019.2 | TE0835-test_board_noprebuilt-vivado_2019.2-build_15_20201027100145.zip
TE0835-test_board-vivado_2019.2-build_15_20201027100128.zip | Mohsen Chamanbaz | |
|
|
Release Notes and Know Issues
| Page properties |
|---|
|
Notes :- add known Design issues and general notes for the current revision
- do not delete known issue, add fixed version time stamp if issue fixed
|
| Scroll Title |
|---|
| anchor | Table_KI |
|---|
| title-alignment | center |
|---|
| title | Known Issues |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Issues | Description | Workaround | To be fixed version |
|---|
| Updating the signal property failed, while the generation of the signal is already in progress | It is difficult to update the property of the generated signal while the generation of the signal by DACs is already running. The Generation button must be clicked several times to make the change in the output. | - It is recommended to reprogram and initialize the boad again if such situation happens.
| Solved with 2022-02-24 update |
|
Requirements
Software
| Page properties |
|---|
|
Notes : - list of software which was used to generate the design
|
| Scroll Title |
|---|
| anchor | Table_SW |
|---|
| title-alignment | center |
|---|
| title | Software |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Software | Version | Note |
|---|
| Vitis | 20202022.2 | needed, Vivado is included into Vitis installation | | PetaLinux | 20202022.2 | needed | | RF Analyzer | 20202023.21 | needed | | SI ClockBuilder Pro | --- | optional |
|
Hardware
| Page properties |
|---|
|
Notes : - list of hardware which was used to generate the design
- mark the module and carrier board, which was used tested with an *
|
Basic description of TE Board Part Files is available on TE Board Part Files.
Complete List is available on <design name>/board_files/*_board_files.csv
Design supports following modules:
| Expand |
|---|
|
| Scroll Title |
|---|
| anchor | Table_HWM |
|---|
| title-alignment | center |
|---|
| title | Hardware Modules |
|---|
| | Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Module Model | Board Part Short Name | PCB Revision Support | DDR | QSPI Flash | EMMC | Others | Notes | Design |
|---|
| TE0835-02-MXE21-A | 25dr_1e_4gb |
|
REV2| REV02 | 4GB | 128MB | NA | NA | NA | TE0835 | | TE0835-02-TXE21-A |
|
*REV2| REV02 | 4GB | 128MB | NA | NA | NA | TE0835 |
|
*used as reference |
Design supports following carriers:
| Scroll Title |
|---|
| anchor | Table_HWC |
|---|
| title-alignment | center |
|---|
| title | Hardware Carrier |
|---|
|
TE0835-02-UXE21-A* | 48dr_1e_4gb | REV02 | 4GB | 128MB | NA | NA | NA | TE0835 | TE0835-02-TXI21-A | 47dr_1e_4gb | REV02 | 4GB | 128MB | NA | NA | NA | TE0835 | TE0835-02-TXE21-AS | 47dr_1e_4gb | REV02 | 4GB | 128MB | NA | NA | NA | TE0835 | TE0835-01-MXE21-A | 25dr_1e_4gb | REV01 | 4GB | 128MB | NA | NA | NA | TE0835 | TE0835-02-S001 | 47dr_1e_4gb | REV02 | 4GB | 128MB | NA | NA | NA | TE0835 | TE0835-02-S002 | 47dr_1e_4gb | REV02 | 4GB | 128MB | NA | NA | NA | TE0835 | | TE0835-02-S004 | 25dr_1e_4gb | REV02 | 4GB | 128MB | NA | NA | NA | TE0835 |
*used as reference |
|
Design supports following carriers:
| Scroll Title |
|---|
| anchor | Table_HWC |
|---|
| title-alignment | center |
|---|
| title | Hardware Carrier |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Carrier Model | Notes |
|---|
| TEB0835-02* |
|
*used as reference |
Additional HW
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
style | widths | | sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
| Carrier Model | Notes |
|---|
TEB0835-02* | *used as reference
Additional HW Requirements:
| Scroll Title |
|---|
| anchor | Table_AHW |
|---|
| title-alignment | center |
|---|
| title | Additional Hardware |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Additional Hardware | Notes |
|---|
| Micro USB Cable for JTAG/UART |
| | Cooler | It is strongly recommended that the RFSoC should not should be used without with heat sink. | | SMA male connector cable | Some ADC inputs/DAC outouts outputs have the SMA connector | | UFL female connector cable | Some ADC inputs/DAC outouts outputs have the UFL connector | | Ethernet cable |
| | SD card | 16GB | | Signal generator (optional) | To feed a desired signal to the input of ADC | | Oscilloscope (optional) | To monitor the output signal of DACs. | | PC | With ATX Power supply and PCIe X8 slot |
*used as reference
|
Content
For general structure and of the reference design, see Project Delivery - AMD devices
Design Sources
| Scroll Title |
|---|
| anchor | Table_DS |
|---|
| title-alignment | center |
|---|
| title | Design sources |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Type | Location | Notes |
|---|
| Vivado | <design name>/block_design
<design name>/constraints
<design name>/ip_lib | Vivado Project will be generated by TE Scripts | | Vitis | <design name>/sw_lib | Additional Software Template for Vitis and apps_list.csv with settings automatically for Vitis app generation | | PetaLinux | <design name>/os/petalinux | PetaLinux template with current configuration |
|
Additional Sources
| Scroll Title |
|---|
| anchor | Table_ADS |
|---|
| title-alignment | center |
|---|
| title | Additional design sources |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Type | Location | Notes |
|---|
| SI5395 (PLL of the RFSoc Module) | <design name>/misc/Si5395 | SI5395 Project with current PLL Configuration | | SI5395 (PLL of the carrier board) | <design name>/misc/Si5395 | SI5395 Project with current PLL Configuration | | init.sh | <project folder>\misc\sd\ | Additional Initialization Script for Linux |
|
Prebuilt
| Page properties |
|---|
|
Notes : - prebuilt files
- Template Table:
| Scroll Title |
|---|
| anchor | Table_PF |
|---|
| title-alignment | center |
|---|
| title | Prebuilt files |
|---|
| | Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
File | File-Extension | Description |
|---|
| BIF-File | *.bif | File with description to generate Bin-File | | BIN-File | *.bin | Flash Configuration File with Boot-Image (Zynq-FPGAs) | | BIT-File | *.bit | FPGA (PL Part) Configuration File | | Boot Script-File | *.scr | Distro Boot Script file | | DebugProbes-File | *.ltx | Definition File for Vivado/Vivado Labtools Debugging Interface | Debian SD-Image | *.img | Debian Image for SD-Card | | Diverse Reports | --- | Report files in different formats | | Device Tree | *.dts | Device tree (2 possible, one for u-boot and one for linux) | | Hardware-Platform-Description-File | *.xsa | Exported Vivado hardware description file for Vitis and PetaLinux | | LabTools Project-File | *.lpr | Vivado Labtools Project File | MCS-File | *.mcs | Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only) | MMI-File | *.mmi | File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only) | | OS-Image | *.ub | Image with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk) | | Software-Application-File | *.elf | Software Application for Zynq or MicroBlaze Processor Systems | SREC-File | *.srec | Converted Software Application for MicroBlaze Processor Systems |
|
|
| Scroll Title |
|---|
| anchor | Table_PF |
|---|
| title-alignment | center |
|---|
| title | Prebuilt files (only on ZIP with prebult content) |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
File | File-Extension | Description |
|---|
| BIF-File | *.bif | File with description to generate Bin-File | | BIN-File | *.bin | Flash Configuration File with Boot-Image (Zynqmp RFSoC-FPGAs) | | BIT-File | *.bit | FPGA (PL Part) Configuration File | | DebugProbes-File | *.ltx | Definition File for Vivado/Vivado Labtools Debugging Interface | | Diverse Reports | --- | Report files in different formats | | Hardware-Platform-Specification-Files | *.xsa | Exported Vivado Hardware Specification for Vitis and PetaLinux | | LabTools Project-File | *.lpr | Vivado Labtools Project File | | OS-Image | *.ub | Image with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk) | | Software-Application-File | *.elf | Software Application for Zynqmp RFSoC or MicroBlaze Processor Systems | | Clock Builder Pro project file | *.slabtimeproj | Defines the necessary clock frequencies for the PLLs on the RFSoC module and carrier board |
|
Download
Reference Design is only usable with the specified Vivado/Vitis/PetaLinux version. Do never use different Versions of Xilinx Software for the same Project.
Reference Design is available on:
Software Setup
Download RF Analyzer GUI from the following link and install it.
Design Flow
| Scroll Ignore |
|---|
| scroll-viewport | true |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
|
|
| Note |
|---|
Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first lunch. |
Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.
See also:
The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.
TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery - AMD devices#CurrentlylimitationsoffunctionalityCurrently limitations of functionality
| Note |
|---|
Caution! Win OS has a 260 character limit for path lengths which can affect the Vivado tools. To avoid this issue, use Virtual Drive or the shortest possible names and directory locations for the reference design (for example "x:\<project folder>") |
Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
| Code Block |
|---|
| language | bash |
|---|
| theme | Midnight |
|---|
| title | _create_win_setup.cmd/_create_linux_setup.sh |
|---|
|
------------------------Set design paths----------------------------
-- Run Design with: _create_win_setup
-- Use Design Path: <absolute project path>
--------------------------------------------------------------------
-------------------------TE Reference Design---------------------------
--------------------------------------------------------------------
-- (0) Module selection guide, project creation...prebuilt export...
-- (1) Create minimum setup of CMD-Files and exit Batch
-- (2) Create maximum setup of CMD-Files and exit Batch
-- (3) (internal only) Dev
-- (4) (internal only) Prod
-- (c) Go to CMD-File Generation (Manual setup)
-- (d) Go to Documentation (Web Documentation)
-- (g) Install Board Files from Xilinx Board Store (beta)
-- (a) Start design with unsupported Vivado Version (beta)
-- (x) Exit Batch (nothing is done!)
----
Select (ex.:'0' for module selection guide): |
- Press 0 and enter to start "Module Selection Guide"
- Createproject and follow instructions of the product selection guide, settings file will be configured automatically during this process.
Create hardware description file (.xsa file) for PetaLinux petaLinux project and export to prebuilt folder
| Code Block |
|---|
| language | py |
|---|
| theme | Midnight |
|---|
| title | run on Vivado TCL (Script generates design and export files into "<project folder>\prebuilt\hardware\<short name>") |
|---|
|
TE::hw_build_design -export_prebuilt |
| Info |
|---|
Using Vivado GUI is the same, except file export to prebuilt folder. |
- Create and configure your PetaLinux project with exported .xsa-file, see PetaLinux KICKstart
- use TE Template from "<project folder>\os\petalinux"
use exported .xsa file from "<project folder>\prebuilt\hardware\<short name>" . Note: HW Export from Vivado GUI creates another path as default workspace.
The build images are located in the "<plnx-proj-root>/images/linux" directory
- Configure the boot.scr file as needed, see Distro Boot with Boot.scr
- Generate Programming Files with Vitis (recommended)
- Copy PetaLinux build image files to prebuilt
folder- folder
Generate Programming Files with Vitis
| Code Block |
|---|
| language | py |
|---|
| theme | Midnight |
|---|
| title | run on Vivado TCL (Script generates applications and bootable files, which are defined in "test_board\sw_lib\apps_list.csv") |
|---|
|
TE::sw_run_vitis -all
TE::sw_run_vitis (optional; Start Vitis from Vivado GUI or start with TE Scripts on Vivado TCL) |
| Note |
|---|
TCL scripts generate also platform project, this must be done manually in case GUI is used. See Vitis |
- Generate Programming Files with Petalinux (alternative), see PetaLinux KICKstart
Launch
| Scroll Ignore |
|---|
| scroll-viewport | true |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
|
|
| Page properties |
|---|
|
Note: - Programming and Startup procedure
|
Programming
| Note |
|---|
Check Module and Carrier TRMs for proper HW configuration before you try any design. Reference Design is also available with prebuilt files. It's recommended to use TE prebuilt files for first launch. |
Xilinx documentation for programming and debugging: AMD Development Tools#XilinxSoftwareProgrammingandDebugging Vivado/Vitis/SDSoC-Xilinx Software Programming and Debugging
Get prebuilt boot binaries
- _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
- Press 0 and enter to start "Module Selection Guide"
- Select assembly version
- Validate selection
Select Create and open delivery binary folder
| Info |
|---|
Note: Folder "<project folder>\_binaries_<Article Name>" with subfolder "boot_<app name>" for different applications will be generated |
QSPI-Boot mode
Option for Boot.bin on QSPI Flash and image.ub and boot.scr on SD or USB.
- Connect JTAG and power on carrier with module
Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
| Code Block |
|---|
| language | py |
|---|
| theme | Midnight |
|---|
| title | run on Vivado TCL (Script programs BOOT.bin on QSPI flash) |
|---|
|
TE::pr_program_flash -swapp u-boot
TE::pr_program_flash -swapp hello_te0820te0835 (optional) |
| Note |
|---|
To program with Vitis/Vivado GUI, use special FSBL (fsbl_flash) on setup |
- Copy image.ub and boot.scr on SD or USB
- use files from "<project folder>\_binaries_<Article Name>\boot_linux" from generated binary folder,see: Get prebuilt boot binaries
- or use prebuilt file location, see "<project folder>\prebuilt\file_location.txt"
- Set Boot Mode to QSPI-Boot and insert SD or USB.
- Depends on Carrier, see carrier TRM.
SD-Boot mode
- Copy image.ub and Boot.bin on SD-Card
- use files from (<project foler>/_binaries_<Articel Name>)/boot_linux from generated binary folder,see: Get prebuilt boot binaries
- or use prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
- Set Boot Mode to SD-Boot.
- Depends on Carrier, see carrier TRM.
- Insert SD-Card in SD-Slot.
JTAG
Not used on this Example.
Hardware Setup
The Hardware contains of a TE0835 module and TEB0835 carrier board and has 8 ADC inputs and 8 DAC outputs.
- Plug the TE0835 module on the TEB0835 carrier board
- Install the cooler on the RFSoC chip
- Attention: It is strongly recommended that the RFSoC should not be used without heat sink.
- Connect the micro USB cable to the J29 connector
- Plug the board on the PCIe port of the PC
- Plug the prepared SD card on the SD card socket (J28)
- Connect a cable with SMA or UFL connector to one of the DAC connector( for example DAC0 J9) and feed it back to the related ADC input (for example ADC0 J1)
- (optional) A signal generator can be used to feed desired sinal to ADC input.
- (optional) An oscilloscope can be used to monitor the output signal of DAC.
Usage
- Prepare HW like described on section Hardware Setup
- Connect UART USB (most cases same as JTAG)
Select SD Card as Boot Mode (or QSPI - depending on step 1)
| Info |
|---|
Note: See TRM of the Carrier, which is used. |
| Tip |
|---|
Starting with Petalinux version 2020.1, the industry standard "Distro-Boot" boot flow for U-Boot was introduced, which significantly expands the possibilities of the boot process and has the primary goal of making booting much more standardised and predictable.
The boot options described above describe the common boot processes for this hardware; other boot options are possible.
For more information see Distro Boot with Boot.scr |
Power On PCB
| Expand |
|---|
|
1. Zynqmp RFSoC Boot ROM loads FSBL from SD into OCM 2. FSBL loads U-boot from SD into DDR, 3. U-boot loads Linux (image.ub) from SD/QSPI/... into DDR |
| Page properties |
|---|
|
This step depends on Xilinx Device/Hardware for Zynq-7000 series 1. Zynq Boot ROM loads FSBL from SD/QSPI into OCM, 2. FSBL init the PS, programs the PL using the bitstream and loads U-boot from SD/QSPI into DDR, 3. U-boot loads Linux (image.ub) from SD/QSPI/... into DDR
for ZynqMP??? 1. ZynqMP Boot ROM loads FSBL from SD/QSPI into OCM, 2. FSBL init the PS, programs the PL using the bitstream and loads PMU, ATF and U-boot from SD/QSPI into DDR, 3. U-boot loads Linux (image.ub) from SD/QSPI/... into DDR
for Microblaze with Linux
1. FPGA Loads Bitfile from Flash, 2. MCS Firmware configure SI5338 and starts Microblaze, (only if mcs is available) 3. SREC Bootloader from Bitfile Firmware loads U-Boot into DDR (This takes a while), 4. U-boot loads Linux from QSPI Flash into DDR
for native FPGA
... |
Linux
- Open Serial Console (e.g. putty)
- Speed: 115200
select COM Port
| Info |
|---|
Win OS, see device manager, Linux OS see dmesg |grep tty (UART is *USB1) |
Linux Console:
| Code Block |
|---|
| language | bash |
|---|
| theme | Midnight |
|---|
|
# password disabled
petalinux login: root
Password: root |
| Info |
|---|
Note: Wait until Linux boot finished |
You can use Linux shell now.
| Code Block |
|---|
| language | bash |
|---|
| theme | Midnight |
|---|
|
i2cdetect -y -r 0 (check I2C Bus; BUS 0 up to 5 possible)
dmesg | grep rtc (RTC check)
udhcpc (ETH0 check)
lsusb (USB check) |
- Option Features
- Webserver to get access to Zynqmp RFSoC
- insert IP on web browser to start web interface
- init.sh scripts
- add init.sh script on SD, content will be load automatically on startup (template included in "<project folder>\misc\SD")
Vivado HW Manager
Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder)
- Monitoring:
- The output frequency of MMCM blocks can be monitored.
- Set radix from VIO signals to unsigned integer.
- The tempreature temperature of ARM processor and FPGA can be measured too.
| Scroll Title |
|---|
| anchor | Figure_VHM |
|---|
| title-alignment | center |
|---|
| title | Vivado Hardware Manager |
|---|
|
 |
RF Analyzer
- Open the RF Analyzer GUI
- Click on Connect button
- Adjust the desired JTAG frequency (for example 30MHZ)
- Give the generated bitstream file path
- Click on Download Bitstream button to load the Bitstream file on the FPGA
- When downloading is finished, click on Select Target button
- After initilalisationinitialisation, all ADCs/DACs tiles are visible
- Click on desired DAC tile and choose a DAC (for example DAC0)
- Adjust desired DAC properties (for example output frequency)
- Click on Generate button to generate the signal in output of DAC
- Click on the related ADC tile and choose the related ADC (for example ADC0)
- Click on Acquire button to aqcuire acquire the input signal
- The spectum spectrum of the DAC output signal can be seen now. The signal can be visible in time domain too.
- Tip: In menu Window click on Multiview Multi view to see all of DACs and ADCs simultaneously.
| Expand |
|---|
| title | ADC/DAC connection overview for TE0835-02-MXE21-A |
|---|
|
| RF Analyzer GUI | Board TE0835 ( RFSoC U1) |
| TEB0835 |
|---|
| Tile /Converter | SoC Pin Name | SoC Pin Number | B2B | Signal Name | Connector Designator | Connector Type |
|---|
| ADC Tile 0-ADC 01 | ADC0_P/ADC0_N | AK2/AK1 | 31/29 | ADC0_P/ADC0_N | J1 | SMA | | ADC Tile 0-ADC 23 | ADC1_P/ADC1_N | AH2/AH1 | 43/41 | ADC1_P/ADC1_N | J2 | UFL | | ADC Tile 1-ADC 01 | ADC2_P/ADC2_N | AF2/AF1 | 49/47 | ADC2_P/ADC2_N | J3 | SMA | | ADC Tile 1-ADC 23 | ADC3_P/ADC3_N | AD2/AD1 | 59/61 | ADC3_P/ADC3_N | J4 | UFL | | ADC Tile 2-ADC 01 | ADC4_P/ADC4_N | AB2/AB1 | 67/65 | ADC4_P/ADC4_N | J5 | SMA | | ADC Tile 2-ADC 23 | ADC5_P/ADC5_N | Y2/Y1 | 79/77 | ADC5_P/ADC5_N | J6 | UFL | | ADC Tile 3-ADC 01 | ADC6_P/ADC6_N | V2/V1 | 85/83 | ADC6_P/ADC6_N | J7 | SMA | | ADC Tile 3-ADC 23 | ADC7_P/ADC7_N | T2/T1 | 97/95 | ADC7_P/ADC7_N | J8 | UFL | | DAC Tile 0-DAC 0 | DAC0_P/DAC0_N | N2/N1 | 103/101 | DAC0_P/DAC0_N | J9 | SMA | | DAC Tile 0-DAC 1 | DAC1_P/DAC1_N | L2/L1 | 109/107 | DAC1_P/DAC1_N | J10 | UFL | | DAC Tile 0-DAC 2 | DAC2_P/DAC2_N | J2/J1 | 121/119 | DAC2_P/DAC2_N | J11 | SMA | | DAC Tile 0-DAC 3 | DAC3_P/DAC3_N | G2/G1 | 127/125 | DAC3_P/DAC3_N | J12 | UFL | | DAC Tile 1-DAC 0 | DAC4_P/DAC4_N | E2/E1 | 133/131 | DAC4_P/DAC4_N | J13 | UFL | | DAC Tile 1-DAC 1 | DAC5_P/DAC5_N | C2/C1 | 139/137 | DAC5_P/DAC5_N | J14 | UFL | | DAC Tile 1-DAC 2 | DAC6_P/DAC6_N | B4/A4 | 151/149 | DAC6_P/DAC6_N | J15 | UFL | | DAC Tile 1-DAC 3 | DAC7_P/DAC7_N | B6/A6 | 157/155 | DAC7_P/DAC7_N | J16 | UFL |
|
| Expand |
|---|
| title | ADC/DAC connection overview for TE0835-02-TXE21-A |
|---|
|
| RF Analyzer GUI | Board TE0835 ( RFSoC U1) |
| TEB0835 |
|---|
| Tile /Converter | SoC Pin Name | SoC Pin Number | B2B | Signal Name | Connector Designator | Connector Type |
|---|
| ADC Tile 0-ADC 01 | ADC0_P/ADC0_N | AK2/AK1 | 31/29 | ADC0_P/ADC0_N | J1 | SMA | | ADC Tile 0-ADC 23 | ADC1_P/ADC1_N | AH2/AH1 | 43/41 | ADC1_P/ADC1_N | J2 | UFL | | ADC Tile 1-ADC 01 | ADC2_P/ADC2_N | AF2/AF1 | 49/47 | ADC2_P/ADC2_N | J3 | SMA | | ADC Tile 1-ADC 23 | ADC3_P/ADC3_N | AD2/AD1 | 59/61 | ADC3_P/ADC3_N | J4 | UFL | | ADC Tile 2-ADC 01 | ADC4_P/ADC4_N | AB2/AB1 | 67/65 | ADC4_P/ADC4_N | J5 | SMA | | ADC Tile 2-ADC 23 | ADC5_P/ADC5_N | Y2/Y1 | 79/77 | ADC5_P/ADC5_N | J6 | UFL | | ADC Tile 3-ADC 01 | ADC6_P/ADC6_N | V2/V1 | 85/83 | ADC6_P/ADC6_N | J7 | SMA | | ADC Tile 3-ADC 23 | ADC7_P/ADC7_N | T2/T1 | 97/95 | ADC7_P/ADC7_N | J8 | UFL | | DAC Tile 0-DAC 0 | DAC0_P/DAC0_N | N2/N1 | 103/101 | DAC0_P/DAC0_N | J9 | SMA | | DAC Tile 0-DAC 2 | DAC1_P/DAC1_N | L2/L1 | 109/107 | DAC1_P/DAC1_N | J10 | UFL | | DAC Tile 1-DAC 0 | DAC2_P/DAC2_N | J2/J1 | 121/119 | DAC2_P/DAC2_N | J11 | SMA | | DAC Tile 1-DAC 2 | DAC3_P/DAC3_N | G2/G1 | 127/125 | DAC3_P/DAC3_N | J12 | UFL | | DAC Tile 2-DAC 0 | DAC4_P/DAC4_N | E2/E1 | 133/131 | DAC4_P/DAC4_N | J13 | UFL | | DAC Tile 2-DAC 2 | DAC5_P/DAC5_N | C2/C1 | 139/137 | DAC5_P/DAC5_N | J14 | UFL | | DAC Tile 3-DAC 0 | DAC6_P/DAC6_N | B4/A4 | 151/149 | DAC6_P/DAC6_N | J15 | UFL | | DAC Tile 1-DAC 2 | DAC7_P/DAC7_N | B6/A6 | 157/155 | DAC7_P/DAC7_N | J16 | UFL |
|
As an example the GUi should be seen after initialization as below:
| Expand |
|---|
| title | Overview for TE0835-02-MXE21-A |
|---|
|
 Image Removed Image Added
|
| Expand |
|---|
| title | Overview for TE0835-02-TXE21-A / TE0835-02-UXE21-A |
|---|
|
 Image Added
|
| Expand |
|---|
| title | Clock Distribution TE0835-02-TXE21/ TE0835-02-UXE21 |
|---|
|
 Image Added Image Removed
|
For example, when all DACs are in operation, the GUI can be seen as below:
| Expand |
|---|
|
 Image Removed Image Added
|
For example, when all ADCs are in operation, the GUI can be seen as below:
| Expand |
|---|
|
 Image Removed Image Added
|
System Design - Vivado
| Scroll Ignore |
|---|
| scroll-viewport | true |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
|
|
Block Design
| Scroll Title |
|---|
| anchor | Figure_BD |
|---|
| title-alignment | center |
|---|
| title | Block Design |
|---|
|
 Image Removed Image Added
|
PS Interfaces
Activated interfaces:
| Scroll Title |
|---|
| anchor | Table_PSI |
|---|
| title-alignment | center |
|---|
| title | PS Interfaces |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Type | Note |
|---|
| DDR |
| | QSPI | MIO | | SD1 | MIO | | I2C0 | MIO | | I2C1 | MIO | | UART0 | MIO | | GPIO0 | MIO | | GPIO1 | MIO | | GPIO2 | MIO | | SWDT0..1 |
| | TTC0..3 |
| | GEM3 | MIO | | USB0 | MIO | | PCIe | MIO |
|
Constraints
Basic module constrains
| Code Block |
|---|
| language | ruby |
|---|
| title | _i_bitgen_common.xdc |
|---|
|
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design] |
Design specific constrain
| Expand |
|---|
| title | Constraint files for TE0835-02-MXE21-A |
|---|
|
| Code Block |
|---|
| language | ruby |
|---|
| title | _i_false_path.xdc |
|---|
| set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/F_reg[*]/D}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_A_B_DATA_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_ALU_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_C_DATA_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[4].COUNTER_F_inst/bl.DSP48E_2/DSP_ALU_INST/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[4].COUNTER_F_inst/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[5].COUNTER_F_inst/bl.DSP48E_2/DSP_ALU_INST/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[5].COUNTER_F_inst/bl.DSP48E_2/DSP_OUTPUT_INST/*}] |
| Code Block |
|---|
| language | ruby |
|---|
| title | _i_usp_rf_data_converter_0_example_design.xdc |
|---|
| #----------------------------------------------------------------------
# Title : Example top level constraints for UltraScale+ RF Data Converter
#----------------------------------------------------------------------
# File : usp_rf_data_converter_0_example_design.xdc
#----------------------------------------------------------------------
# Description: Xilinx Constraint file for the example design for
# UltraScale+ RF Data Converter core
#---------------------------------------------------------------------
#
# DISCLAIMER
# This disclaimer is not a license and does not grant any
# rights to the materials distributed herewith. Except as
# otherwise provided in a valid license issued to you by
# Xilinx, and to the maximum extent permitted by applicable
# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
# (2) Xilinx shall not be liable (whether in contract or tort,
# including negligence, or under any other theory of
# liability) for any loss or damage of any kind or nature
# related to, arising under or in connection with these
# materials, including for any direct, or any indirect,
# special, incidental, or consequential loss or damage
# (including loss of data, profits, goodwill, or any type of
# loss or damage suffered as a result of any action brought
# by a third party) even if such damage or loss was
# reasonably foreseeable or Xilinx had been advised of the
# possibility of the same.
#
# CRITICAL APPLICATIONS
# Xilinx products are not designed or intended to be fail-
# safe, or for use in any application requiring fail-safe
# performance, such as life-support or safety devices or
# systems, Class III medical devices, nuclear facilities,
# applications related to the deployment of airbags, or any
# other applications that could lead to death, personal
# injury, or severe property or environmental damage
# (individually and collectively, "Critical
# Applications"). Customer assumes the sole risk and
# liability of any use of Xilinx products in Critical
# Applications, subject only to applicable laws and
# regulations governing limitations on product liability.
#
# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
# PART OF THIS FILE AT ALL TIMES.
#
#---------------------------------------------------------------------
#------------------------------------------
# TIMING CONSTRAINTS
#------------------------------------------
# Set AXI-Lite Clock to 100MHz
#create_clock -period 10.000 -name usp_rf_data_converter_0_axi_aclk [get_pins axi_aclk_i/CFGMCLK]
# ADC Reference Clock for Tile 0 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc0_clk [get_ports adc0_clk_p]
# ADC Reference Clock for Tile 1 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc1_clk [get_ports adc1_clk_p]
# ADC Reference Clock for Tile 2 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc2_clk [get_ports adc2_clk_p]
# ADC Reference Clock for Tile 3 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc3_clk [get_ports adc3_clk_p]
# DAC Reference Clock for Tile 0 running at 307.200 MHz
create_clock -period 3.255 -name usp_rf_data_converter_0_dac0_clk [get_ports dac0_clk_p]
# DAC Reference Clock for Tile 1 running at 307.200 MHz
create_clock -period 3.255 -name usp_rf_data_converter_0_dac1_clk [get_ports dac1_clk_p]
set_multicycle_path -to [get_pins -filter {REF_PIN_NAME== D} -of [get_cells -hier -filter {name =~ *usp_rf_data_converter_0_ex_i/ex_design/usp_rf_data_converter_0/inst/IP2Bus_Data_reg*}]] -setup 2
set_multicycle_path -to [get_pins -filter {REF_PIN_NAME== D} -of [get_cells -hier -filter {name =~ *usp_rf_data_converter_0_ex_i/ex_design/usp_rf_data_converter_0/inst/IP2Bus_Data_reg*}]] -hold 1
###############################################################################
# False paths
# For debug in synth use
# report_timing_summary -setup -slack_lesser_than 0
###############################################################################
# Data generator/capture constraints
set rfa_from_list [get_cells -hier -regexp .*rf(?:da|ad)c_exdes_ctrl_i\/(?:da|ad)c_exdes_cfg_i\/.+num_samples_reg.*]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_00*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_00*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_01*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_01*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_02*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_02*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_03*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_03*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_10*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_10*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_11*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_11*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_12*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_12*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_13*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_13*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_from_list [get_cells -hier -regexp .*rf(?:da|ad)c_exdes_ctrl_i\/(?:da|ad)c_exdes_cfg_i\/.+num_samples_reg.*]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
|
|
| Expand |
|---|
| title | Constraint files for TE0835-02-TXE21-A / TE0835-02-UXE21-A |
|---|
|
| Code Block |
|---|
| language | ruby |
|---|
| title | _i_false_path.xdc |
|---|
| set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/F_reg[*]/D}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_A_B_DATA_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_ALU_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_C_DATA_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[4].COUNTER_F_inst/bl.DSP48E_2/DSP_ALU_INST/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[4].COUNTER_F_inst/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[5].COUNTER_F_inst/bl.DSP48E_2/DSP_ALU_INST/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[5].COUNTER_F_inst/bl.DSP48E_2/DSP_OUTPUT_INST/*}] |
| Code Block |
|---|
| language | ruby |
|---|
| title | _i_usp_rf_data_converter_0_example_design.xdc |
|---|
| #----------------------------------------------------------------------
# Title : Example top level constraints for UltraScale+ RF Data Converter
#----------------------------------------------------------------------
# File : usp_rf_data_converter_0_example_design.xdc
#----------------------------------------------------------------------
# Description: Xilinx Constraint file for the example design for
# UltraScale+ RF Data Converter core
#---------------------------------------------------------------------
#
# DISCLAIMER
# This disclaimer is not a license and does not grant any
# rights to the materials distributed herewith. Except as
# otherwise provided in a valid license issued to you by
# Xilinx, and to the maximum extent permitted by applicable
# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
# (2) Xilinx shall not be liable (whether in contract or tort,
# including negligence, or under any other theory of
# liability) for any loss or damage of any kind or nature
# related to, arising under or in connection with these
# materials, including for any direct, or any indirect,
# special, incidental, or consequential loss or damage
# (including loss of data, profits, goodwill, or any type of
# loss or damage suffered as a result of any action brought
# by a third party) even if such damage or loss was
# reasonably foreseeable or Xilinx had been advised of the
# possibility of the same.
#
# CRITICAL APPLICATIONS
# Xilinx products are not designed or intended to be fail-
# safe, or for use in any application requiring fail-safe
# performance, such as life-support or safety devices or
# systems, Class III medical devices, nuclear facilities,
# applications related to the deployment of airbags, or any
# other applications that could lead to death, personal
# injury, or severe property or environmental damage
# (individually and collectively, "Critical
# Applications"). Customer assumes the sole risk and
# liability of any use of Xilinx products in Critical
# Applications, subject only to applicable laws and
# regulations governing limitations on product liability.
#
# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
# PART OF THIS FILE AT ALL TIMES.
#
#---------------------------------------------------------------------
#------------------------------------------
# TIMING CONSTRAINTS
#------------------------------------------
# Set AXI-Lite Clock to 100MHz
create_clock -period 10.000 -name usp_rf_data_converter_0_axi_aclk [get_pins axi_aclk_i/CFGMCLK]
# ADC Reference Clock for Tile 0 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc0_clk [get_ports adc0_clk_p]
# ADC Reference Clock for Tile 1 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc1_clk [get_ports adc1_clk_p]
# ADC Reference Clock for Tile 2 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc2_clk [get_ports adc2_clk_p]
# ADC Reference Clock for Tile 3 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc3_clk [get_ports adc3_clk_p]
# DAC Reference Clock for Tile 0 running at 307.200 MHz
create_clock -period 3.255 -name usp_rf_data_converter_0_dac0_clk [get_ports dac0_clk_p]
set_multicycle_path -to [get_pins -filter {REF_PIN_NAME== D} -of [get_cells -hier -filter {name =~ *usp_rf_data_converter_0_ex_i/ex_design/usp_rf_data_converter_0/inst/IP2Bus_Data_reg*}]] -setup 2
set_multicycle_path -to [get_pins -filter {REF_PIN_NAME== D} -of [get_cells -hier -filter {name =~ *usp_rf_data_converter_0_ex_i/ex_design/usp_rf_data_converter_0/inst/IP2Bus_Data_reg*}]] -hold 1
###############################################################################
# False paths
# For debug in synth use
# report_timing_summary -setup -slack_lesser_than 0
###############################################################################
# Data generator/capture constraints
set rfa_from_list [get_cells -hier -regexp .*rf(?:da|ad)c_exdes_ctrl_i\/(?:da|ad)c_exdes_cfg_i\/.+num_samples_reg.*]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_00*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_00*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_00*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_00*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_02*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_02*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_02*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_02*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_10*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_10*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_10*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_10*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_12*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_12*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_12*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_12*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_20*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_20*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_20*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_20*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_22*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_22*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_22*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_22*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_30*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_30*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_30*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_30*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_32*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_32*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_32*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_32*addrbend_reg}]]]
set rfa_from_list [get_cells -hier -regexp .*rf(?:da|ad)c_exdes_ctrl_i\/(?:da|ad)c_exdes_cfg_i\/.+num_samples_reg.*]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_00*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_00*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_00*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_00*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_01*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_01*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_01*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_01*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_02*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_02*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_02*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_02*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_03*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_03*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_03*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_03*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_10*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_10*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_10*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_10*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_11*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_11*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_11*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_11*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_12*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_12*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_12*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_12*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_13*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_13*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_13*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_13*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_20*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_20*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_20*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_20*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_21*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_21*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_21*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_21*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_22*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_22*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_22*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_22*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_23*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_23*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_23*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_23*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_30*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_30*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_30*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_30*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_31*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_31*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_31*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_31*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_32*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_32*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_32*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_32*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_33*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_33*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_33*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_33*wea_r_reg}]]]
|
|
Software Design - Vitis
| Scroll Ignore |
|---|
| scroll-viewport | true |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
|
|
For SDK project creation, follow instructions from:
Vitis
Application
| Page properties |
|---|
|
---------------------------------------------------------- FPGA Example ---------------------------------------------------------- scuMCS Firmware to configure SI5338 and Reset System. srec_spi_bootloaderTE modified 20202022.2 SREC Bootloader to load app or second bootloader from flash into DDR Descriptions: - Modified Files: blconfig.h, bootloader.c
- Changes:
- Add some console outputs and changed bootloader read address.
- Add bugfix for 2018.2 qspi flash
xilisf_v5_11TE modified 20202022.2 xilisf_v5_11 - Changed default Flash type to 5.
---------------------------------------------------------- Zynq Example: fsblTE modified 2020.2 FSBL General: ---------------------------------------------------------- fsblTE modified 2022.2 FSBL General: Module Specific: - Add Files: all TE Files start with te_*
- READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
- CPLD access
- Read CPLD Firmware and SoC Type
- Configure Marvell PHY
fsbl_flashTE modified 2020.2 FSBL General: - Modified Files: main.c
- General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
---------------------------------------------------------- ZynqMP Example: ---------------------------------------------------------- zynqmp_fsblTE modified 20202022.2 FSBL General: - Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c (search for 'TE Mod' on source code)
- Add Files: te_xfsbl_hooks.h/.c (for hooks and board)
- General Changes:
- Display FSBL Banner and Device Name
Module Specific: - Add Files: all TE Files start with te_*
- Si5338 Configuration
- ETH+OTG Reset over MIO
zynqmp_fsbl_flashTE modified 2020.2 FSBL General: - Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
- General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
zynqmp_pmufwXilinx default PMU firmware. pmufwXilinx default PMU firmware. ---------------------------------------------------------- General Example: ----------------------------------------------------------General Example: hello_te0820Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output. u-bootU-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin. |
Template location: ./sw_lib/sw_apps/
zynqmp_fsbl
TE modified 20202022.2 FSBL
General:
- Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
- Add Files: te_xfsbl_hooks.h/.c (for hooks and board)
- General Changes:
- Display FSBL Banner and Device Name
Module Specific:
- Add Files: all TE Files start with te_*
- Si5395 on the TE0835 RFSoC module configuration
- Si5395 on the TEB0835 carrier board configuration
zynqmp
_fsbl_flashTE modified 2020.2 FSBL
General:
Modified Files: xfsbl_
initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.cGeneral Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
zynqmp_pmufw
Xilinx default PMU firmware.
hello_te0835
Hello TE0835 is a Xilinx Hello World example as endless loop instead of one console output.
u-boot
U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.
Software Design - PetaLinux
| Scroll Ignore |
|---|
| scroll-viewport | true |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
|
|
For PetaLinux installation and project creation, follow instructions from:
Config
Start with petalinux-config or petalinux-config --get-hw-description
Changes:
Select SD as default:
- CONFIG_SUBSYSTEM_PRIMARY_SD_PSU_SD_1_SELECT=y
- CONFIG_SUBSYSTEM_ETHERNET_PSU_ETHERNET_3_MAC=""
U-Boot
Start with petalinux-config -c u-boot
ChangesAdd new flash partition for bootscr and sizing:
- CONFIG_ENVSUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART0_SIZE=0xA00000
- CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART1_SIZE=0x2000000
- CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART2_SIZE=0x40000
- CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART3_NAME="bootscr"
- CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART3_SIZE=0x80000
Identification:
- CONFIG_SUBSYSTEM_HOSTNAME="Trenz"
- CONFIG_SUBSYSTEM_PRODUCT="TE0835"
U-Boot
Start with petalinux-config -c u-boot
Changes:
CONFIG_ENV_IS_NOWHERE=y
# CONFIG_ENV_IS_IN_IS_NOWHERE=y# CONFIG_ENV_IS_IN_SPI_FLASH is not set
CONFIG_I2C_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
CONFIG_SYS_I2C_EEPROM_ADDR=0
CONFIG_SYS_I2C_EEPROM_BUS=0
CONFIG_SYS_EEPROM_SIZE=256
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=0
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=0
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=1
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0
Change platform-top.h:
| Code Block |
|---|
|
MAC from eeprom together with uboot and device tree settings:
- CONFIG_ENV_OVERWRITE=y
- CONFIG_NET_RANDOM_ETHADDR is not set
Boot Modes:
- CONFIG_QSPI_BOOT=y
- CONFIG_SD_BOOT=y
- CONFIG_ENV_IS_IN_FAT is not set
- CONFIG_ENV_IS_IN_NAND is not set
- CONFIG_ENV_IS_IN_SPI_FLASH is not set
- CONFIG_SYS_REDUNDAND_ENVIRONMENT is not set
- CONFIG_BOOT_SCRIPT_OFFSET=0x2A40000
Identification
- CONFIG_IDENT_STRING="TE0835"
Change platform-top.h:
Device Tree
Device Tree
| Code Block |
|---|
|
/include/ "system-conf.dtsi"
/ {
chosen {
xlnx,eeprom = &eeprom;
};
};
/*------------------ SD --------------------*/
/* SDIO */
&sdhci1 {
disable-wp;
no-1-8-v;
};
/*------------------ ETH PHY --------------------*/
/* ETH PHY */
&gem3 {
status = "okay";
ethernet_phy0: ethernet-phy@0 {
compatible = "marvell,88e1510";
device_type = "ethernet-phy";
reg = <1>;
};
};
/*------------------- USB --------------------*/
/* USB 2.0 */
/* USB */
&dwc3_0 {
status = "okay";
dr_mode = "host";
maximum-speed = "high-speed";
/delete-property/phy-names;
/delete-property/phys;
/delete-property/snps,usb3_lpm_capable;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
};
&usb0 {
status = "okay";
/delete-property/ clocks;
/delete-property/ clock-names;
clocks = <0x3 0x20>;
clock-names = "bus_clk";
};
/*-------------------- QSPI ---------------------*/
/* QSPI PHY */
&qspi {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
};
};
/*------------------ I2C --------------------*/
// This I2C Port can be found in the RFSoC Module TE0835 to control PLL chip SI5395A-A-GM on the
// RFSoC Module.
&i2c1 {
eeprom: eeprom@50 {
//compatible = "atmel,24c08";
compatible = "microchip,24aa025", "atmel,24c02";
reg = <0x50>;
};
};
// This I2C Port connects RFSoC FPGA on the RFSoC Module and I2C multiplexer Chip on the carrier
// board through B2B connector.
&i2c0 {
// This I2C multiplexer chip can be found in TEB0835 carrier board.
i2c_mux@70 { /* TCA9544APWR U7 in the carrier board TEB0835 */
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c@0 { /* FireFly_B*/
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c@1 { /* FireFly_A*/
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2c@3 { /* LM96163CISD/NOPB U9 FAN Controller in the carrier board TEB0835*/
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
temp@4c { /* lm96163 - u9*/
compatible = "national,lm96163";
reg = <0x4c>;
};
};
i2c@4 { /* SI5395A-A-GM U5 DPLL in the carrier board TEB0835*/
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
clock-generator@68{ /* SI5395A-A-GM U5 DPLL in the carrier board TEB0835 */
compatible = "silabs,si5395";
reg = <0x68>;
};
};
};
};
};
|
FSBL patch
Must be add manually, see templateKernel
Start with petalinux-config -c kernel
Changes:
Rootfs
Start with petalinux-config -c rootfs
Changes:
- CONFIG_i2c-tools=y
- CONFIG_busybox-httpd=y (for web server app)
- CONFIG_packagegroup-petalinux-utils(util-linux,cpufrequtils,bridge-utils,mtd-utils,usbutils,pciutils,canutils,i2c-tools,smartmontools,e2fsprogs)
- CONFIG_EDAC_CORTEX_ARM64=y
Rootfs
Start with petalinux-config -c rootfs
Changes:
CONFIG_i2c-tools=yCONFIG_busybox-httpd=y (for web server app)FSBL patch (alternative for vitis fsbl trenz patch)
| Page properties |
|---|
|
- Hint only needed for series with different PLL versions.
- adjust name for PLL files (SI...)
for Zynq-7000 series | Note |
|---|
te_* files are identical to files in "<project folder>\sw_lib\sw_apps\zynq_fsbl\src" except for the PLL files (SI5345) which depend on PLL revision. The PLL files may have to be copied again manually into the appropriate petalinux folder "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\embeddedsw\fsbl-firmware\git\lib\sw_apps\zynq_fsbl\src" |
for ZynqMP??? | Note |
|---|
te_* files are identical to files in "<project folder>\sw_lib\sw_apps\zynqmp_fsbl\src" except for the PLL files (SI5345) which depend on PLL revision. The PLL files may have to be copied again manually into the appropriate petalinux folder "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\embeddedsw\fsbl-firmware\git\lib\sw_apps\zynqmp_fsbl\src" |
for Microblaze with Linux
|
See "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\embeddedsw"
| Note |
|---|
te_* files are identical to files in "<project folder>\sw_lib\sw_apps\zynqmp_fsbl\src" except for the PLL files (SI5345) which depend on PLL revision. The PLL files may have to be copied again manually into the appropriate petalinux folder "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\embeddedsw\fsbl-firmware\git\lib\sw_apps\zynqmp_fsbl\src" |
CONFIG_packagegroup-petalinux-utils(util-linux,cpufrequtils,bridge-utils,mtd-utils,usbutils,pciutils,canutils,i2c-tools,smartmontools,e2fsprogs)
Applications
See: "<project folder>\os\petalinux\project-spec\meta-user\recipes-apps\"
startup
Script App to load init.sh from SD Card if available.
webfwu
Webserver application accemble for Zynqmp RFSoC access. Need busybox-httpd
Additional Software
| Scroll Ignore |
|---|
| scroll-viewport | true |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
|
|
| Page properties |
|---|
|
Note:
- Add description for other Software, for example SI CLK Builder ...
- SI5338 and SI5345 also Link to:
|
No additional software is needed.
SI5395 of RFSoC module
File location <design name>/misc/Si5395/Si5395-*-835-*.slabtimeproj
General documentation how you work with these project will be available on Si5395
SI5395 of carrier board
File location <design name>/misc/Si5395/Si5395-*-B835-*.slabtimeproj
General documentation how you work with these project will be available on Si5395
Appx. A: Change History and Legal Notices
| Scroll Ignore |
|---|
| scroll-viewport | true |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
|
|
Document Change History
To get content of older revision got to "Change History" of this page and select older document revision number.
| Page properties |
|---|
|
- Note this list must be only updated, if the document is online on public doc!
- It's semi automatically, so do following
Add new row below first Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template - Metadata is only used of compatibility of older exports
|
| Scroll Title |
|---|
| anchor | Table_dch |
|---|
| title | Document change history. |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| widths | 2*,*,3*,4* |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Date | Document Revision | Authors | Description |
|---|
| Page info |
|---|
| infoType | Modified date |
|---|
| dateFormat | yyyy-MM-dd |
|---|
| type | Flat |
|---|
|
| | Page info |
|---|
| infoType | Current version |
|---|
| dateFormat | yyyy-MM-dd |
|---|
| prefix | v. |
|---|
| type | Flat |
|---|
|
| | Page info |
|---|
| infoType | Modified by |
|---|
| type | Flat |
|---|
|
| | | | | | | 2022-02-24 | v.31 | Mohsen Chamanbaz | - Design Update
- Documentation Update
- XCZU47DR variant was added.
- HDL files for XCZU25DR has been updated.
- RF analyzer software was updated to 2020.2 version.
| | 2022-02-11 | v.28 | John Hartfiel | | | 2021-07-14 | v.27 | John Hartfiel | | | 2020-12-09 | v.25 | John Hartfiel | - Style changes
- additional notes
| | 2020-11-02 | v.20 | Mohsen Chamanbaz | | | -- | all | | Page info |
|---|
| infoType | Modified users |
|---|
| dateFormat | yyyy-MM-dd |
|---|
| type | Flat |
|---|
|
| -- |
|
Legal Notices
| Include Page |
|---|
| IN:Legal Notices |
|---|
| IN:Legal Notices |
|---|
|