Overview Refer to http://trenz.org/te0835-info for the current online version of this manual and other available documentation.
Key Features
Vitis/Vivado 2022.2 PetaLinux 2022.2 RF Analyzer 2023.1 PCIe (endpoint) SD ETH USB I2C RTC FMeter Modified FSBL for SI5395 programming Special FSBL for QSPI programming Revision History Release Notes and Know Issues Requirements Software Hardware Basic description of TE Board Part Files is available on TE Board Part Files .
Complete List is available on <design name>/board_files/*_board_files.csv
Design supports following modules:
Design supports following carriers:
Additional HW Requirements:
Content For general structure and of the reference design, see Project Delivery - AMD devices
Design Sources Additional Sources Prebuilt Download Reference Design is only usable with the specified Vivado/Vitis/PetaLinux version. Do never use different Versions of Xilinx Software for the same Project.
Reference Design is available on:
Software Setup Download RF Analyzer GUI from the following link and install it.
Design Flow Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.
See also:
The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.
TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality
Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
------------------------Set design paths----------------------------
-- Run Design with: _create_win_setup
-- Use Design Path: <absolute project path>
--------------------------------------------------------------------
-------------------------TE Reference Design---------------------------
--------------------------------------------------------------------
-- (0) Module selection guide, project creation...prebuilt export...
-- (1) Create minimum setup of CMD-Files and exit Batch
-- (2) Create maximum setup of CMD-Files and exit Batch
-- (3) (internal only) Dev
-- (4) (internal only) Prod
-- (c) Go to CMD-File Generation (Manual setup)
-- (d) Go to Documentation (Web Documentation)
-- (g) Install Board Files from Xilinx Board Store (beta)
-- (a) Start design with unsupported Vivado Version (beta)
-- (x) Exit Batch (nothing is done!)
----
Select (ex.:'0' for module selection guide):
Press 0 and enter to start "Module Selection Guide" Create project and follow instructions of the product selection guide, settings file will be configured automatically during this process. Create hardware description file (.xsa file) for petaLinux project a nd export to prebuilt folder
TE::hw_build_design -export_prebuilt
Create and configure your PetaLinux project with exported .xsa-file, see PetaLinux KICKstart use TE Template from "<project folder>\os\petalinux" use exported .xsa file from "<project folder>\prebuilt\hardware\<short name>" . Note: HW Export from Vivado GUI creates another path as default workspace.
The build images are located in the " <plnx-proj-root>/images/linux" directory
Configure the boot.scr file as needed, see Distro Boot with Boot.scr Generate Programming Files with Vitis (recommended) Copy PetaLinux build image files to prebuilt folder Generate Programming Files with Vitis
TE::sw_run_vitis -all
TE::sw_run_vitis (optional; Start Vitis from Vivado GUI or start with TE Scripts on Vivado TCL)
Generate Programming Files with Petalinux (alternative), see PetaLinux KICKstart Launch Programming Xilinx documentation for programming and debugging: Vivado/Vitis/SDSoC-Xilinx Software Programming and Debugging
Get prebuilt boot binaries _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell Press 0 and enter to start "Module Selection Guide"Select assembly version Validate selection Select Create and open delivery binary folder
QSPI-Boot mode Option for Boot.bin on QSPI Flash and image.ub and boot.scr on SD or USB .
Connect JTAG and power on carrier with module Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
TE::pr_program_flash -swapp u-boot
TE::pr_program_flash -swapp hello_te0835 (optional)
Copy image.ub and boot.scr on SD or USB use files from "<project folder>\_binaries_<Article Name>\boot_linux" from generated binary folder,see: Get prebuilt boot binaries or use prebuilt file location, see "<project folder>\prebuilt\file_location.txt" Set Boot Mode to QSPI-Boot and insert SD or USB .Depends on Carrier, see carrier TRM. SD-Boot mode Copy image.ub and Boot.bin on SD-Card use files from (<project foler>/_binaries_<Articel Name>)/boot_linux from generated binary folder,see: Get prebuilt boot binaries or use prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt Set Boot Mode to SD-Boot.Depends on Carrier, see carrier TRM. Insert SD-Card in SD-Slot. JTAG Not used on this Example.
Hardware Setup The Hardware contains of a TE0835 module and TEB0835 carrier board and has 8 ADC inputs and 8 DAC outputs.
Plug the TE0835 module on the TEB0835 carrier board Install the cooler on the RFSoC chipAttention: It is strongly recommended that the RFSoC should not be used without heat sink. Connect the micro USB cable to the J29 connector Plug the board on the PCIe port of the PC Plug the prepared SD card on the SD card socket (J28) Connect a cable with SMA or UFL connector to one of the DAC connector( for example DAC0 J9) and feed it back to the related ADC input (for example ADC0 J1) (optional) A signal generator can be used to feed desired sinal to ADC input. (optional) An oscilloscope can be used to monitor the output signal of DAC. Usage Prepare HW like described on section Hardware Setup Connect UART USB (most cases same as JTAG) Select SD Card as Boot Mode (or QSPI - depending on step 1)
Power On PCB
boot process
1. Zynqmp RFSoC Boot ROM loads FSBL from SD into OCM
2. FSBL loads U-boot from SD into DDR,
3. U-boot loads Linux (image.ub ) from SD/QSPI/... into DDR
Linux Open Serial Console (e.g. putty) Speed: 115200 select COM Port
Linux Console:
# password disabled
petalinux login: root
Password: root
You can use Linux shell now.
i2cdetect -y -r 0 (check I2C Bus; BUS 0 up to 5 possible)
dmesg | grep rtc (RTC check)
udhcpc (ETH0 check)
lsusb (USB check)
Option Features Webserver to get access to Zynqmp RFSoC insert IP on web browser to start web interface init.sh scripts add init.sh script on SD, content will be load automatically on startup (template included in "<project folder>\misc\SD") Vivado HW Manager Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder)
Monitoring: The output frequency of MMCM blocks can be monitored. Set radix from VIO signals to unsigned integer. The temperature of ARM processor and FPGA can be measured too. Open the RF Analyzer GUI Click on Connect button Adjust the desired JTAG frequency (for example 30MHZ) Give the generated bitstream file path Click on Download Bitstream button to load the Bitstream file on the FPGA When downloading is finished, click on Select Target button After initialisation, all ADCs/DACs tiles are visible Click on desired DAC tile and choose a DAC (for example DAC0) Adjust desired DAC properties (for example output frequency) Click on Generate button to generate the signal in output of DAC Click on the related ADC tile and choose the related ADC (for example ADC0) Click on Acquire button to acquire the input signal The spectrum of the DAC output signal can be seen now. The signal can be visible in time domain too.Tip: In menu Window click on Multi view to see all of DACs and ADCs simultaneously. ADC/DAC connection overview for TE0835-02-MXE21-A
RF Analyzer GUI Board TE0835 ( RFSoC U1) TEB0835 Tile /Converter SoC Pin Name SoC Pin Number B2B Signal Name Connector Designator Connector Type ADC Tile 0-ADC 01 ADC0_P/ADC0_N AK2/AK1 31/29 ADC0_P/ADC0_N J1 SMA ADC Tile 0-ADC 23 ADC1_P/ADC1_N AH2/AH1 43/41 ADC1_P/ADC1_N J2 UFL ADC Tile 1-ADC 01 ADC2_P/ADC2_N AF2/AF1 49/47 ADC2_P/ADC2_N J3 SMA ADC Tile 1-ADC 23 ADC3_P/ADC3_N AD2/AD1 59/61 ADC3_P/ADC3_N J4 UFL ADC Tile 2-ADC 01 ADC4_P/ADC4_N AB2/AB1 67/65 ADC4_P/ADC4_N J5 SMA ADC Tile 2-ADC 23 ADC5_P/ADC5_N Y2/Y1 79/77 ADC5_P/ADC5_N J6 UFL ADC Tile 3-ADC 01 ADC6_P/ADC6_N V2/V1 85/83 ADC6_P/ADC6_N J7 SMA ADC Tile 3-ADC 23 ADC7_P/ADC7_N T2/T1 97/95 ADC7_P/ADC7_N J8 UFL DAC Tile 0-DAC 0 DAC0_P/DAC0_N N2/N1 103/101 DAC0_P/DAC0_N J9 SMA DAC Tile 0-DAC 1 DAC1_P/DAC1_N L2/L1 109/107 DAC1_P/DAC1_N J10 UFL DAC Tile 0-DAC 2 DAC2_P/DAC2_N J2/J1 121/119 DAC2_P/DAC2_N J11 SMA DAC Tile 0-DAC 3 DAC3_P/DAC3_N G2/G1 127/125 DAC3_P/DAC3_N J12 UFL DAC Tile 1-DAC 0 DAC4_P/DAC4_N E2/E1 133/131 DAC4_P/DAC4_N J13 UFL DAC Tile 1-DAC 1 DAC5_P/DAC5_N C2/C1 139/137 DAC5_P/DAC5_N J14 UFL DAC Tile 1-DAC 2 DAC6_P/DAC6_N B4/A4 151/149 DAC6_P/DAC6_N J15 UFL DAC Tile 1-DAC 3 DAC7_P/DAC7_N B6/A6 157/155 DAC7_P/DAC7_N J16 UFL
ADC/DAC connection overview for TE0835-02-TXE21-A
RF Analyzer GUI Board TE0835 ( RFSoC U1) TEB0835 Tile /Converter SoC Pin Name SoC Pin Number B2B Signal Name Connector Designator Connector Type ADC Tile 0-ADC 01 ADC0_P/ADC0_N AK2/AK1 31/29 ADC0_P/ADC0_N J1 SMA ADC Tile 0-ADC 23 ADC1_P/ADC1_N AH2/AH1 43/41 ADC1_P/ADC1_N J2 UFL ADC Tile 1-ADC 01 ADC2_P/ADC2_N AF2/AF1 49/47 ADC2_P/ADC2_N J3 SMA ADC Tile 1-ADC 23 ADC3_P/ADC3_N AD2/AD1 59/61 ADC3_P/ADC3_N J4 UFL ADC Tile 2-ADC 01 ADC4_P/ADC4_N AB2/AB1 67/65 ADC4_P/ADC4_N J5 SMA ADC Tile 2-ADC 23 ADC5_P/ADC5_N Y2/Y1 79/77 ADC5_P/ADC5_N J6 UFL ADC Tile 3-ADC 01 ADC6_P/ADC6_N V2/V1 85/83 ADC6_P/ADC6_N J7 SMA ADC Tile 3-ADC 23 ADC7_P/ADC7_N T2/T1 97/95 ADC7_P/ADC7_N J8 UFL DAC Tile 0-DAC 0 DAC0_P/DAC0_N N2/N1 103/101 DAC0_P/DAC0_N J9 SMA DAC Tile 0-DAC 2 DAC1_P/DAC1_N L2/L1 109/107 DAC1_P/DAC1_N J10 UFL DAC Tile 1-DAC 0 DAC2_P/DAC2_N J2/J1 121/119 DAC2_P/DAC2_N J11 SMA DAC Tile 1-DAC 2 DAC3_P/DAC3_N G2/G1 127/125 DAC3_P/DAC3_N J12 UFL DAC Tile 2-DAC 0 DAC4_P/DAC4_N E2/E1 133/131 DAC4_P/DAC4_N J13 UFL DAC Tile 2-DAC 2 DAC5_P/DAC5_N C2/C1 139/137 DAC5_P/DAC5_N J14 UFL DAC Tile 3-DAC 0 DAC6_P/DAC6_N B4/A4 151/149 DAC6_P/DAC6_N J15 UFL DAC Tile 1-DAC 2 DAC7_P/DAC7_N B6/A6 157/155 DAC7_P/DAC7_N J16 UFL
As an example the GUi should be seen after initialization as below:
Overview for TE0835-02-MXE21-A
Overview for TE0835-02-TXE21-A / TE0835-02-UXE21-A
Clock Distribution TE0835-02-TXE21/ TE0835-02-UXE21
For example, when all DACs are in operation, the GUI can be seen as below:
For example, when all ADCs are in operation, the GUI can be seen as below:
System Design - Vivado Block Design PS Interfaces Activated interfaces:
Constraints Basic module constrains
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design]
Design specific constrain Constraint files for TE0835-02-MXE21-A
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/F_reg[*]/D}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_A_B_DATA_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_ALU_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_C_DATA_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[4].COUNTER_F_inst/bl.DSP48E_2/DSP_ALU_INST/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[4].COUNTER_F_inst/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[5].COUNTER_F_inst/bl.DSP48E_2/DSP_ALU_INST/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[5].COUNTER_F_inst/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
#----------------------------------------------------------------------
# Title : Example top level constraints for UltraScale+ RF Data Converter
#----------------------------------------------------------------------
# File : usp_rf_data_converter_0_example_design.xdc
#----------------------------------------------------------------------
# Description: Xilinx Constraint file for the example design for
# UltraScale+ RF Data Converter core
#---------------------------------------------------------------------
#
# DISCLAIMER
# This disclaimer is not a license and does not grant any
# rights to the materials distributed herewith. Except as
# otherwise provided in a valid license issued to you by
# Xilinx, and to the maximum extent permitted by applicable
# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
# (2) Xilinx shall not be liable (whether in contract or tort,
# including negligence, or under any other theory of
# liability) for any loss or damage of any kind or nature
# related to, arising under or in connection with these
# materials, including for any direct, or any indirect,
# special, incidental, or consequential loss or damage
# (including loss of data, profits, goodwill, or any type of
# loss or damage suffered as a result of any action brought
# by a third party) even if such damage or loss was
# reasonably foreseeable or Xilinx had been advised of the
# possibility of the same.
#
# CRITICAL APPLICATIONS
# Xilinx products are not designed or intended to be fail-
# safe, or for use in any application requiring fail-safe
# performance, such as life-support or safety devices or
# systems, Class III medical devices, nuclear facilities,
# applications related to the deployment of airbags, or any
# other applications that could lead to death, personal
# injury, or severe property or environmental damage
# (individually and collectively, "Critical
# Applications"). Customer assumes the sole risk and
# liability of any use of Xilinx products in Critical
# Applications, subject only to applicable laws and
# regulations governing limitations on product liability.
#
# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
# PART OF THIS FILE AT ALL TIMES.
#
#---------------------------------------------------------------------
#------------------------------------------
# TIMING CONSTRAINTS
#------------------------------------------
# Set AXI-Lite Clock to 100MHz
#create_clock -period 10.000 -name usp_rf_data_converter_0_axi_aclk [get_pins axi_aclk_i/CFGMCLK]
# ADC Reference Clock for Tile 0 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc0_clk [get_ports adc0_clk_p]
# ADC Reference Clock for Tile 1 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc1_clk [get_ports adc1_clk_p]
# ADC Reference Clock for Tile 2 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc2_clk [get_ports adc2_clk_p]
# ADC Reference Clock for Tile 3 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc3_clk [get_ports adc3_clk_p]
# DAC Reference Clock for Tile 0 running at 307.200 MHz
create_clock -period 3.255 -name usp_rf_data_converter_0_dac0_clk [get_ports dac0_clk_p]
# DAC Reference Clock for Tile 1 running at 307.200 MHz
create_clock -period 3.255 -name usp_rf_data_converter_0_dac1_clk [get_ports dac1_clk_p]
set_multicycle_path -to [get_pins -filter {REF_PIN_NAME== D} -of [get_cells -hier -filter {name =~ *usp_rf_data_converter_0_ex_i/ex_design/usp_rf_data_converter_0/inst/IP2Bus_Data_reg*}]] -setup 2
set_multicycle_path -to [get_pins -filter {REF_PIN_NAME== D} -of [get_cells -hier -filter {name =~ *usp_rf_data_converter_0_ex_i/ex_design/usp_rf_data_converter_0/inst/IP2Bus_Data_reg*}]] -hold 1
###############################################################################
# False paths
# For debug in synth use
# report_timing_summary -setup -slack_lesser_than 0
###############################################################################
# Data generator/capture constraints
set rfa_from_list [get_cells -hier -regexp .*rf(?:da|ad)c_exdes_ctrl_i\/(?:da|ad)c_exdes_cfg_i\/.+num_samples_reg.*]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_00*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_00*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_01*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_01*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_02*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_02*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_03*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_03*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_10*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_10*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_11*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_11*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_12*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_12*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_13*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_13*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
set rfa_from_list [get_cells -hier -regexp .*rf(?:da|ad)c_exdes_ctrl_i\/(?:da|ad)c_exdes_cfg_i\/.+num_samples_reg.*]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
Constraint files for TE0835-02-TXE21-A / TE0835-02-UXE21-A
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/F_reg[*]/D}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_A_B_DATA_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_ALU_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/toggle_reg/C}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/*/bl.DSP48E_2/DSP_C_DATA_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[4].COUNTER_F_inst/bl.DSP48E_2/DSP_ALU_INST/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[4].COUNTER_F_inst/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
set_false_path -from [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[5].COUNTER_F_inst/bl.DSP48E_2/DSP_ALU_INST/CLK}] -to [get_pins -hier -filter {name=~*labtools_fmeter_0/U0/FMETER_gen[5].COUNTER_F_inst/bl.DSP48E_2/DSP_OUTPUT_INST/*}]
#----------------------------------------------------------------------
# Title : Example top level constraints for UltraScale+ RF Data Converter
#----------------------------------------------------------------------
# File : usp_rf_data_converter_0_example_design.xdc
#----------------------------------------------------------------------
# Description: Xilinx Constraint file for the example design for
# UltraScale+ RF Data Converter core
#---------------------------------------------------------------------
#
# DISCLAIMER
# This disclaimer is not a license and does not grant any
# rights to the materials distributed herewith. Except as
# otherwise provided in a valid license issued to you by
# Xilinx, and to the maximum extent permitted by applicable
# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
# (2) Xilinx shall not be liable (whether in contract or tort,
# including negligence, or under any other theory of
# liability) for any loss or damage of any kind or nature
# related to, arising under or in connection with these
# materials, including for any direct, or any indirect,
# special, incidental, or consequential loss or damage
# (including loss of data, profits, goodwill, or any type of
# loss or damage suffered as a result of any action brought
# by a third party) even if such damage or loss was
# reasonably foreseeable or Xilinx had been advised of the
# possibility of the same.
#
# CRITICAL APPLICATIONS
# Xilinx products are not designed or intended to be fail-
# safe, or for use in any application requiring fail-safe
# performance, such as life-support or safety devices or
# systems, Class III medical devices, nuclear facilities,
# applications related to the deployment of airbags, or any
# other applications that could lead to death, personal
# injury, or severe property or environmental damage
# (individually and collectively, "Critical
# Applications"). Customer assumes the sole risk and
# liability of any use of Xilinx products in Critical
# Applications, subject only to applicable laws and
# regulations governing limitations on product liability.
#
# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
# PART OF THIS FILE AT ALL TIMES.
#
#---------------------------------------------------------------------
#------------------------------------------
# TIMING CONSTRAINTS
#------------------------------------------
# Set AXI-Lite Clock to 100MHz
create_clock -period 10.000 -name usp_rf_data_converter_0_axi_aclk [get_pins axi_aclk_i/CFGMCLK]
# ADC Reference Clock for Tile 0 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc0_clk [get_ports adc0_clk_p]
# ADC Reference Clock for Tile 1 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc1_clk [get_ports adc1_clk_p]
# ADC Reference Clock for Tile 2 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc2_clk [get_ports adc2_clk_p]
# ADC Reference Clock for Tile 3 running at 245.760 MHz
create_clock -period 4.069 -name usp_rf_data_converter_0_adc3_clk [get_ports adc3_clk_p]
# DAC Reference Clock for Tile 0 running at 307.200 MHz
create_clock -period 3.255 -name usp_rf_data_converter_0_dac0_clk [get_ports dac0_clk_p]
set_multicycle_path -to [get_pins -filter {REF_PIN_NAME== D} -of [get_cells -hier -filter {name =~ *usp_rf_data_converter_0_ex_i/ex_design/usp_rf_data_converter_0/inst/IP2Bus_Data_reg*}]] -setup 2
set_multicycle_path -to [get_pins -filter {REF_PIN_NAME== D} -of [get_cells -hier -filter {name =~ *usp_rf_data_converter_0_ex_i/ex_design/usp_rf_data_converter_0/inst/IP2Bus_Data_reg*}]] -hold 1
###############################################################################
# False paths
# For debug in synth use
# report_timing_summary -setup -slack_lesser_than 0
###############################################################################
# Data generator/capture constraints
set rfa_from_list [get_cells -hier -regexp .*rf(?:da|ad)c_exdes_ctrl_i\/(?:da|ad)c_exdes_cfg_i\/.+num_samples_reg.*]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_00*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_00*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_00*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_00*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_02*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_02*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_02*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_02*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_10*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_10*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_10*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_10*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_12*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_12*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_12*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_12*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_20*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_20*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_20*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_20*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_22*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_22*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_22*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_22*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_30*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_30*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_30*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_30*addrbend_reg}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_32*addrb_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_32*addrb_reg[*]}]]]
set rfa_dac_signal_list [get_cells -hier -filter {name=~*dg_slice_32*addrbend_reg}]
set_false_path -from $rfa_from_list -to $rfa_dac_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*dg_slice_32*addrbend_reg}]]]
set rfa_from_list [get_cells -hier -regexp .*rf(?:da|ad)c_exdes_ctrl_i\/(?:da|ad)c_exdes_cfg_i\/.+num_samples_reg.*]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_00*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_00*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_00*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_00*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_00*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_01*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_01*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_01*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_01*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_01*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_02*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_02*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_02*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_02*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_02*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_03*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_03*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_03*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_03*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_03*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_10*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_10*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_10*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_10*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_10*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_11*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_11*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_11*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_11*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_11*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_12*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_12*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_12*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_12*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_12*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_13*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_13*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_13*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_13*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_13*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_20*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_20*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_20*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_20*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_20*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_21*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_21*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_21*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_21*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_21*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_22*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_22*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_22*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_22*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_22*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_23*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_23*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_23*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_23*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_23*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_30*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_30*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_30*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_30*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_30*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_31*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_31*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_31*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_31*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_31*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_32*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_32*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_32*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_32*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_32*wea_r_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*addra_reg[*]}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_33*addra_reg[*]}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*working_i_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_33*working_i_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*cap_complete_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_33*cap_complete_reg}]]]
set rfa_adc_signal_list [get_cells -hier -filter {name=~*ds_slice_33*wea_r_reg}]
set_false_path -from $rfa_from_list -to $rfa_adc_signal_list
create_waiver -user USP_RF_DATA_CONVERTER -type CDC -id CDC-1 \
-description "Number of samples register is a constant during normal operation" \
-from [list [get_pins -filter {REF_PIN_NAME=~*} -of [get_cells -hier -filter {name=~*c_exdes_cfg_i*num_samples_reg*}]]] \
-to [list [get_pins -filter {REF_PIN_NAME==D} -of [get_cells -hier -filter {name=~*ds_slice_33*wea_r_reg}]]]
Software Design - Vitis For SDK project creation, follow instructions from:
Vitis
Application Template location: ./sw_lib/sw_apps/
zynqmp_fsbl TE modified 2022.2 FSBL
General:
Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code) Add Files: te_xfsbl_hooks.h/.c (for hooks and board) General Changes: Display FSBL Banner and Device Name Module Specific:
Add Files: all TE Files start with te_*Si5395 on the TE0835 RFSoC module configuration Si5395 on the TEB0835 carrier board configuration zynqmp_pmufw Xilinx default PMU firmware.
hello_te0835 Hello TE0835 is a Xilinx Hello World example as endless loop instead of one console output.
u-boot U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.
Software Design - PetaLinux For PetaLinux installation and project creation, follow instructions from:
Config Start with petalinux-config or petalinux-config --get-hw-description
Changes:
Select SD as default:
CONFIG_SUBSYSTEM_PRIMARY_SD_PSU_SD_1_SELECT=y CONFIG_SUBSYSTEM_ETHERNET_PSU_ETHERNET_3_MAC="" Add new flash partition for bootscr and sizing:
CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART0_SIZE=0xA00000 CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART1_SIZE=0x2000000 CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART2_SIZE=0x40000 CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART3_NAME="bootscr" CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART3_SIZE=0x80000 Identification:
CONFIG_SUBSYSTEM_HOSTNAME="Trenz" CONFIG_SUBSYSTEM_PRODUCT="TE0835" U-Boot Start with petalinux-config -c u-boot
Changes:
CONFIG_ENV_IS_NOWHERE=y
# CONFIG_ENV_IS_IN_SPI_FLASH is not set
CONFIG_I2C_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
CONFIG_SYS_I2C_EEPROM_ADDR=0
CONFIG_SYS_I2C_EEPROM_BUS=0
CONFIG_SYS_EEPROM_SIZE=256
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=0
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=0
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=1
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0
MAC from eeprom together with uboot and device tree settings:
CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR is not set Boot Modes:
CONFIG_QSPI_BOOT=y CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_NAND is not set CONFIG_ENV_IS_IN_SPI_FLASH is not set CONFIG_SYS_REDUNDAND_ENVIRONMENT is not set CONFIG_BOOT_SCRIPT_OFFSET=0x2A40000 Identification
CONFIG_IDENT_STRING="TE0835" Change platform-top.h:
Device Tree
/include/ "system-conf.dtsi"
/ {
chosen {
xlnx,eeprom = &eeprom;
};
};
#include "include/dt-bindings/phy/phy.h"
/*------------------ SD --------------------*/
/* SDIO */
&sdhci1 {
disable-wp;
no-1-8-v;
};
/*------------------ ETH PHY --------------------*/
/* ETH PHY */
&gem3 {
status = "okay";
ethernet_phy0: ethernet-phy@0 {
compatible = "marvell,88e1510";
device_type = "ethernet-phy";
reg = <1>;
};
};
/*------------------- USB --------------------*/
/* USB 2.0 */
/* USB */
&dwc3_0 {
status = "okay";
dr_mode = "host";
maximum-speed = "high-speed";
/delete-property/phy-names;
/delete-property/phys;
/delete-property/snps,usb3_lpm_capable;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
};
&usb0 {
status = "okay";
// /delete-property/ clocks;
// /delete-property/ clock-names;
//clocks = <0x3 0x20>;
//clock-names = "bus_clk";
};
/*-------------------- QSPI ---------------------*/
/* QSPI PHY */
&qspi {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
};
};
/*------------------ I2C --------------------*/
// This I2C Port can be found in the RFSoC Module TE0835 to control PLL chip SI5395A-A-GM on the
// RFSoC Module.
&i2c1 {
eeprom: eeprom@50 {
//compatible = "atmel,24c08";
compatible = "microchip,24aa025", "atmel,24c02";
reg = <0x50>;
};
};
// This I2C Port connects RFSoC FPGA on the RFSoC Module and I2C multiplexer Chip on the carrier
// board through B2B connector.
&i2c0 {
// This I2C multiplexer chip can be found in TEB0835 carrier board.
i2c_mux@70 { /* TCA9544APWR U7 in the carrier board TEB0835 */
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c@0 { /* FireFly_B*/
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c@1 { /* FireFly_A*/
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2c@3 { /* LM96163CISD/NOPB U9 FAN Controller in the carrier board TEB0835*/
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
temp@4c { /* lm96163 - u9*/
compatible = "national,lm96163";
reg = <0x4c>;
};
};
i2c@4 { /* SI5395A-A-GM U5 DPLL in the carrier board TEB0835*/
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
clock-generator@68{ /* SI5395A-A-GM U5 DPLL in the carrier board TEB0835 */
compatible = "silabs,si5395";
reg = <0x68>;
};
};
};
};
/*------------------ PCIe --------------------*/
/ {
refclk3:psgtr_dp_clock {
compatible = "fixed-clock";
#clock-cells = <0x00>;
clock-frequency = <27000000>;
};
refclk2:psgtr_pcie_usb_clock {
compatible = "fixed-clock";
#clock-cells = <0x00>;
clock-frequency = <100000000>;
};
refclk1:psgtr_sata_clock {
compatible = "fixed-clock";
#clock-cells = <0x00>;
clock-frequency = <150000000>;
};
};
&psgtr {
status = "okay";
#clock-cells = <0x01>;
clocks = <&refclk2>;
clock-names = "ref2";
};
&pcie {
status = "okay";
phy-names="pciephy";
phys = <&psgtr 0x0 PHY_TYPE_PCIE 0x0 0x0>;
};
Kernel Start with petalinux-config -c kernel
Changes:
Rootfs Start with petalinux-config -c rootfs
Changes:
FSBL patch (alternative for vitis fsbl trenz patch) See "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\embeddedsw"
Applications See: "<project folder>\os\petalinux\project-spec\meta-user\recipes-apps\"
startup Script App to load init.sh from SD Card if available.
webfwu Webserver application accemble for Zynqmp RFSoC access. Need busybox-httpd
Additional Software No additional software is needed.
SI5395 of RFSoC module File location <design name>/misc/Si5395/Si5395-*-835-*.slabtimeproj
General documentation how you work with these project will be available on Si5395
SI5395 of carrier board File location <design name>/misc/Si5395/Si5395-*-B835-*.slabtimeproj
General documentation how you work with these project will be available on Si5395
Appx. A: Change History and Legal Notices Document Change History To get content of older revision got to "Change History" of this page and select older document revision number.
Legal Notices
Data Privacy Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy
Document Warranty The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.
Limitation of Liability In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.
Copyright Notice No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.
Technology Licenses The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.
Environmental Protection To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.
REACH, RoHS and WEEE REACH
Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH . The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA) .
RoHS
Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.
WEEE
Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.
Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission.
Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between:
[interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
[interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
