Page History
...
| Date | Vivado | Project Built | Authors | Description |
|---|---|---|---|---|
| 2018-05-24 | 2017.4 | TE0820-test_board-vivado_2017.4-build_10_20180524151356.zip | John Hartfiel |
|
| 2018-04-25 | 2017.4 | TE0820-test_board-vivado_2017.4-build_07_20180425134435.zip TE0820-test_board_noprebuilt-vivado_2017.4-build_07_20180425134459.zip | John Hartfiel |
|
| 2018-02-06 | 2017.4 | TE0820-test_board-vivado_2017.4-build_06_20180206203359.zip TE0820-test_board_noprebuilt-vivado_2017.4-build_06_20180206203414.zip | John Hartfiel |
|
| 2018-02-01 | 2017.4 | TE0820-test_board-vivado_2017.4-build_05_20180201084319.zip TE0820-test_board_noprebuilt-vivado_2017.4-build_05_20180201094724.zip | John Hartfiel |
|
| 2018-01-24 | 2017.4 | TE0820-test_board-vivado_2017.4-build_05_20180124085247.zip TE0820-test_board_noprebuilt-vivado_2017.4-build_05_20180124085303.zip | John Hartfiel |
|
| 2017-11-21 | 2017.2 | TE0820-test_board-vivado_2017.2-build_05_20171121160552.zip TE0820-test_board_noprebuilt-vivado_2017.2-build_05_20171121160606.zip | John Hartfiel |
|
| 2017-11-20 | 2017.2 | TE0820-test_board-vivado_2017.2-build_05_20171120162931.zip TE0820-test_board_noprebuilt-vivado_2017.2-build_05_20171120162851.zip | John Hartfiel |
|
| 2017-10-19 | 2017.2 | TE0820-test_board-vivado_2017.2-build_05_20171019104824.zip TE0820-test_board_noprebuilt-vivado_2017.2-build_05_20171019104837.zip | John Hartfiel |
|
...
| HTML |
|---|
<!-- - add known Design issues and general Notes for the current revision --> |
| Issues | Description | Workaround | To be fixed version | --- | ---. | --- | ---Description | Workaround | To be fixed version | |
|---|---|---|---|---|---|---|---|---|---|---|
| Flash access on Linux | Device tree is not correct on Linux | add compatibility to "compatible “jedec,spi-nor”" | Solved with 20180524 update | |||||||
| USB UART Terminal is blocked / SDK Debugging is blocked | This happens only with 2017.4 Linux , when JTAG connection is established on Vivado HW Manager. | Do not use HW Manager connection, or if debugging is nessecary:
| Solved with 20180206 update |
Requirements
Software
| HTML |
|---|
<!-- Add needed external Software --> |
...
| Module Model | Board Part Short Name | PCB Revision Support | DDR | QSPI Flash | Others | Notes |
|---|---|---|---|---|---|---|
| TE0820-ES1 | es1 | REV01 | 1GB | 64 |
| |
| TE0820-02-2EG-1E | 2eg_1e | REV02 | 1GB | 64 | ||
| TE0820-02-2EG-1E3 | 2eg_1e | REV02 | 1GB | 64 | 2.5 mm Samtec connectors | |
| TE0820-02-2EG-1EA | 2eg_1e | REV02 | 1GB | 128 | ||
| TE0820-02-2EG-1EE | 2eg_1ee | REV02 | 2GB | 128 | ||
| TE0820-02-2EG-1EL | 2eg_1e | REV02 | 1GB | 128 | 2.5 mm Samtec connectors | |
TE0820-02-2CG-1E | 2cg_1e | REV02 | 1GB | 64 | ||
| TE0820-02-2CG-1EA | 2cg_1e | REV02 | 1GB | 128 | ||
| TE0820-02-3EG-1E | 3eg_1e | REV02 | 1GB | 64 | ||
| TE0820-02-3EG-1E3 | 3eg_1e | REV02 | 1GB | 64 | 2.5 mm Samtec connectors | |
| TE0820-02-3EG-1EA | 3eg_1e | REV02 | 1GB | 128 | ||
| TE0820-02-3EG-1EL | 3eg_1e | REV02 | 1GB | 128 | 2.5 mm Samtec connectors | |
| TE0820-02-3CG-1E | 3cg_1e | REV02 | 1GB | 64 | ||
| TE0820-02-3CG-1EA | 3cg_1e | REV02 | 1GB | 128 | ||
| TE0820-02-4CG-1EA | 4cg_1e | REV02 | 1GB | 128 | ||
| TE0820-03-4EV-1EA | 4ev_1e | REV03 | 1GB | 128 |
...
| Code Block | ||
|---|---|---|
| ||
/include/ "system-conf.dtsi"
/ {
};
/* SDIO */
&sdhci1 {
disable-wp;
no-1-8-v;
};
/* ETH PHY */
&gem3 {
status = "okay";
ethernet_phy0: ethernet-phy@0 {
compatible = "marvell,88e1510";
device_type = "ethernet-phy";
reg = <1>;
};
};
/* USB 2.0 */
&dwc3_0 {
status = "okay";
dr_mode = "host";
maximum-speed = "high-speed";
/delete-property/phy-names;
/delete-property/phys;
/delete-property/snps,usb3_lpm_capable;
};
/* QSPI PHY */
&qspi {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: flash@0 {
compatible = "n25q256a"jedec,spi-nor";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
};
};
/* DMA not used: Reduce error messages on linux.*/
&lpd_dma_chan1 {
status = "disabled";
};
&lpd_dma_chan2 {
status = "disabled";
};
&lpd_dma_chan3 {
status = "disabled";
};
&lpd_dma_chan4 {
status = "disabled";
};
&lpd_dma_chan5 {
status = "disabled";
};
&lpd_dma_chan6 {
status = "disabled";
};
&lpd_dma_chan7 {
status = "disabled";
};
&lpd_dma_chan8 {
status = "disabled";
};
|
...
Overview
Content Tools