Page History

...

1. Open Serial Console (e.g. putty)
   
   1. Speed: 115200
   2. COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1)
2. Linux Console:
   Note: Wait until Linux boot finished For Linux Login use:
   
   1. User Name: root
   2. Password: root
3. You can use Linux shell now.
   1. I2C 0 Bus type: i2cdetect -y -r 0
   2. RTC check: dmesg | grep rtc
   3. ETH0 works with udhcpc
   4. USB type  "lsusb" or connect USB2.0 device
      

Vivado HW Manager

SI5339SI5338_CLK0 Counter: 

1. Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).
   1. Set radix from VIO signals to unsigned integer.
      Note: Frequency Counter is inaccurate and displayed unit is Hz
      

...