Page History
...
Following boot modes are possible on the TE0808 Ultrascale module by generating the corresponding 4-bit code by the pins 'PS_MODE0' ... 'PS_MODE3' (little endian alignment):
| Boot Mode | Mode Pins [3:0] | MIO Location | Description |
|---|---|---|---|
| JTAG | 0x0 | JTAG | Dedicated PS interface. |
| QSPI32 | 0x2 | MIO[12:0] | Configured on module with dual QSPI Flash Memory. 32-bit addressing. |
| SD0 | 0x3 | MIO[25:13] | Supports SD 2.0. |
| SD1 | 0x5 | MIO[51:38] | Supports SD 2.0. |
| eMMC_18 | 0x6 | MIO[22:13] | Supports eMMC 4.5 at 1.8V. |
| USB 0 | 0111b | MIO[52:63] | Supports USB 2.0 and USB 3.0. |
| PJTAG_0 | 0x8 | MIO[29:26] | PS JTAG connection 0 option. |
| SD1-LS | 0xE | MIO[51:39] | Supports SD 3.0 with a required |
Table 9: Selectable boot modes by dedicated boot mode pins
...
Hardware revision number is written on the PCB board together with the module model number separated by the dash.
Document Change History
| Date | Revision | Contributors | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| John Hartfiel, Ali Naseri |
|
| |||
| 2017-02-06 | V1 | Jan Kumann | Initial document |
Disclaimer
| Include Page | ||||
|---|---|---|---|---|
|
Overview
Content Tools