Page History

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

...

Xilinx Download Area - All Xilinx Software, Device Models and Libraries

Getting Started

...

Starter Kit is shipped with prebuilt Linux Example on SD. Newest version and sources are available on our download area: TE0803 Reference Designs

Connect mains power and set power switch to on. See Main Power Enclosure Location
Connect mini USB cable to host PC. (Cable from XMOD on marker 25 of TEBF0808-REV2 Component Location picture, the one with green dot, closer to the SoM)
Insert SD-Card with pre-loaded content into SD-Card slot.
Open Serial Console:
1. COM Port: for correct number see device manager
2. Speed:115200
Press the Power on button on the enclosure. See Power Button, Reset Button, HDD LED and Power LED Enclosure Location
Linux login:
1. User Name:root
2. Password:root

Important Notes

...

Warning
Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM
Note
ES devices are not included in all Vivado versions, for ES1 only:
activate beta device see: FAQ - How can I activate beta devices?
Note
For all Starter Kit's shipped before 2017-06-21:
Enclosure Power and HD LED was swapped on connector. See "Starter Kit Cable Connection - Enclosure Power Button , Reset Button, HDD LED and Power LED" section for correct connection.

Starter Kit Basic

Main Power Enclosure Location

Image Added

Power Button , Reset Button, HDD LED and Power LED Enclosure Location

Image Added

Default DIP Switch Settings

Warning
Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM

TEBF0808

TE0790-02

(with green dot)

TE0790-02L

DIP-Schalter	S4
S4.1	OFF
S4.2	OFF
S4.3	OFF
S4.4	ON

DIP-Schalter	S5
S5.1	ON
S5.2	ON
S5.3	OFF
S5.4	OFF

DIP-Schalter	S1
S1.1	ON
S1.2	OFF
S1.3	OFF
S1.4	OFF

DIP-Schalter	S1
S1.1	ON
S1.2	OFF
S1.3	OFF
S1.4	OFF

For more information, see:TEBF0808

Starter Kit Cable Connection

Starter Kit will be shipped with all cable connected.

ATX Power

Image Added

Module

Image Added

FMC FAN

Image Added

XMODs

Image AddedImage Removed

Enclosure USB

Image RemovedImage Added

Enclosure FAN1 and HDAUDIO

Image Removed

XMOD

Image Removed

Module

Image Removed

Power Button and HDD LED

Image RemovedImage Removed

...

Image AddedImage Added

Enclosure Power Button , Reset Button, HDD LED and Power LED

Image Removed

Image AddedImage Added

Support

For support, please go to http://forum.trenz-electronic.de/ or contact support@trenz-electronic.de