Page History
...
- TE0803 - UltraSoM+ - Wiki with TRM, reference projects, application notes and more
- TE0803 Resources - Links to all TE0803 Resourcesresources
- TEBF0808 - Wiki with TRM, application notes and more
- TEBF0808 Resources - Links to all TEBF0808 Resourcesresources
- TE0790 - XMOD - Wiki with TRM, application notes and more
- TE0790 Resources - Links to all TE0790 Resourcesresources
- Vivado/SDK/SDSoC - Short instructions for Vivado, SDK, SDSoC
- Project Delivery - General descriptions of reference designs and content
...
- TE0803 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more
- TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more
- TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more
- TE Master Pinout - Excel Sheet as Pinout-Viewer sheet as pinout viewer and XDC -Generatorgenerator
Shop Links
- Shop TE0803-Starter-Kit - contains prices, available stock, disposability, scope of delivery and more
...
- Vivado Design Suite - Xilinx Design Software with JTAG drivers and documentation. Vivado Webpack XCZU3CG/EG support will be available from Version 2017.1 .
- Xilinx Download Area - All Xilinx Softwaresoftware, Device Models device models and Librarieslibraries
Important Notes
| Warning |
|---|
| Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters, the one marked with a green dot must be closer to the SoM |
| Note |
|---|
ES devices are not included in all Vivado versions, for ES1 only: activate beta device see: FAQ - How can I activate beta devices? |
| Note |
|---|
For all Starter Kit's Kits shipped before 2017-06-21: Enclosure Power power and HD LED was swapped on connector. See "Enclosure Power Button, Reset Button, HDD LEDand Power LED" section for correct connection. |
...
Starter Kit is shipped with prebuilt Linux Example on SD. Newest version and sources are available on in our download area: TE0803 Reference Designs
...
| Warning |
|---|
| Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters, the one marked with a green dot must be closer to the SoM |
...
Note: with CPLD Firmware REV06 or newer, S4.4 can be set to OFF, to save power, if Starter Kit is powered off with Power Button.
For more information , see: TEBF0808, TEBF0808 Master CPLD and TEBF0808 Slave CPLD.
...
Main Power Switch is OFF
No Power power on Starter Kit.
Identification: FANs do not work, all LEDs are off.
...
Overview
Content Tools