Page History

• Module: TRM Name always "TE Series Name" +TRM
  Example: "TE0728 TRM"
  
  

Template Change history:

Important General Note:

• If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable

• Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

  • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

    • Figure template:

      Scroll Title
      anchor Figure_anchorname title-alignment center title Text
      Scroll Ignore Create DrawIO object here: Attention if you copy from other page, objects are only linked. Scroll Only image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

      
      

    • Table template:

      • Layout macro can be use for landscape of large tables

    • 
      

      Scroll Title
      anchor Table_tablename title-alignment center title Text
      Scroll Table Layout orientation portrait sortDirection ASC repeatTableHeaders default style widths sortByColumn 1 sortEnabled false cellHighlighting true Example Comment 1 2

      
      

  • The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below

    • <type>_<main section>_<name>

      • type: Figure, Table
      • main section:
        
        • "OV" for Overview
        • "SIP" for Signal Interfaces and Pins,
        • "OBP" for On board Peripherals,
        • "PWR" for Power and Power-On Sequence,
        • "B2B" for Board to Board Connector,
        • "TS" for Technical Specification
        • "VCP" for Variants Currently in Production
        •  "RH" for Revision History
      • name: custom, some fix names, see below
    • Fix names:
      

      • "Figure_OV_BD" for Block Diagram

      • "Figure_OV_MC" for Main Components

      • "Table_OV_IDS" for Initial Delivery State

      • "Table_PWR_PC" for Power Consumption

      • "Figure_PWR_PD" for Power Distribution
      • "Figure_PWR_PS" for Power Sequence
      • "Figure_PWR_PM" for Power Monitoring
      • "Table_PWR_PR" for Power Rails
      • "Table_PWR_BV" for Bank Voltages

      • "Table_TS_AMR" for Absolute_Maximum_Ratings

      • "Table_TS_ROC" for Recommended_Operating_Conditions

      • "Figure_TS_PD" for Physical_Dimensions
      • "Table_VCP_SO" for TE_Shop_Overview

      • "Table_RH_HRH" for Hardware_Revision_History

      • "Figure_RH_HRN" for Hardware_Revision_Number
      • "Table_RH_DCH" for Document_Change_History
  • Use Anchor in the document: add link macro and add "#<anchorname>
  • Refer to Anchror from external : <page url>#<pagename without space characters>-<anchorname>

-----------------------------------------------------------------------

Note for Download Link of the Scroll ignore macro:

• Link to the base folder of the module (remove de/ or en/ from the URL):
  Example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5_Carriers/TE0728/

Download PDF version of this document.

• • te0728-info

• • List of available short links: https://wiki.trenz-electronic.de/display/CON/Redirects

Notes Note:

• short description of the PCB

• Short Link of the wiki resources reference:

  • Use short link the Wiki Resource page, for example: http://trenz.org/te0728-info

  • List of available short links: https://wiki.trenz-electronic.de/display/CON/Redirects

 'description: Important components and connector or other Features of the module
→ please sort and indicate assembly options

→ See examples fro different types <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-KeyFeatures

add drawIO object in Scroll Ignore section and add reference image in Scroll Only.

Notes :

• Picture of the PCB (top and bottom side) with labels of important components
• Add List below

For subsection examples see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-Signals,InterfacesandPins

you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delet the Test Point section.

Example:

¹⁾ Direction:

• • IN (C2M): Carrier to Module, means it's an input from the point of view of this board
  • OUT (M2C): Module to Carrier, means it's output from the point of view of this board

¹⁾ Direction:

• • IN (C2M): Carrier to Module, means it's an input from the point of view of this board
  • OUT (M2C): Module to Carrier, means it's output from the point of view of this board

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection by assigning advance link using: #NameOfTheSection

Example:

For example subsections see: <Series Name> TRM Template section examples#%3CSeriesName%3ETRMTemplatesectionexamples-On-boardPeripherals

• Overview  all Controller signals, like Reset, Boote Mode, JTAG Interface(Connector or USB In case of FTDI)...
• In case it's connected to CPLD always link to CPLD description and add not from the  current implementation here(in case it's available)

¹⁾ Direction:

• • IN (C2M): Carrier to Module, means it's an input from the point of view of this board
  • OUT (M2C): Module to Carrier, means it's output from the point of view of this board

Enter the default value for power supply and startup of the module here.

• Order of power provided Voltages and Reset/Enable signals

Link to Schematics, for power images or more details

List of all Powerrails which are accessible by the customer

• Main Power Rails and Variable Bank Power

¹⁾ Direction:

• • IN (C2M): Carrier to Module, means it's an input from the point of view of this board
  • OUT (M2C): Module to Carrier, means it's output from the point of view of this board

List baseboard design hints for final baseboard development.

• This section is optional and only for modules.

• use "include page" macro and link to the general B2B connector page of the module series,

  For example: 6 x 6 SoM LSHM B2B Connectors
  

  Include Page
  PD:6 x 6 SoM LSHM B2B Connectors PD:6 x 6 SoM LSHM B2B Connectors

List of all Powerrails which are accessible by the customer

• Main Power Rails and Variable Bank Power add boarder one time maximum Rating (Board will damaged)

In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Set correct link to the shop page overview table of the product on English and German.

Example for TE0706:

    ENG Page: https://shop.trenz-electronic.de/en/search?sSearch=TE0706

    DEU Page: https://shop.trenz-electronic.de/de/search?sSearch=TE0706

Set correct links to download  Carrier, e.g. TE0706 REV02:

  TE0706-02  ->   https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0706/REV02/Documents

Note:

• Date format:  YYYY-MM-DD

• Example: 

  Date	Revision	Changes	Documentation Link
  2020-11-25	REV02	Resistors R14 and R15 was replaced by 953R (was 5K1) Resistor R5 was replaced by 5K1, R8 by 953R (was 9K09 and 1K69 respectively)	REV02

  
  

• Note this list must be only updated, if the document is online on public doc!
• It's semi automatically, so do following
  

  • Add new row below first

  • Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

  • Metadata is only used of compatibility of older exports