Page History
| Scroll Ignore |
|---|
Download PDF version of this document. |
| Company | Trenz Electronic GmbH |
|---|---|
| PCN Number | PCN-20230101 |
| Title | TE0714-03 to TE0714-04 Hardware Revision Change |
| Subject | Hardware Revision Change |
| Issue Date | 2023-0201-0117 |
Products Affected
This change affects all Trenz Electronic TE0714 SoMs: TE0714-03*.
Affected Product | Replacement | ||
|---|---|---|---|
| TE0714-03-50-2IAC6 | TE0714-04-52I-8-A | ||
| TE0714-03-50-2I | TE0714-04-52I-7-B | ||
| TE0714-03-35-2IC7 | TE0714-04-42I-7-C | ||
| TE0714-03-35-2I3 | TE0714-04-42I-7-L | ||
| TE0714-03-35-2I | TE0714-04-42I-7-B |
...
#6 Changed inductors from BKP0603HS121-T to MPZ0603S121HT000 for L1, L2, L10, and L11.
Type: Schematic BOM Change
Reason:EOL of component.
...
Type: Schematic Change
Reason: Improve clock enable signallevel for 1.8V versions of TE0714.
Impact: Set proper signal voltageEN high signal imunity to small voltage deviations.
#8 Changed power sequence for U5 and U6.
Type: Schematic Change
Reason: Use Xilinx recommended power sequence.
...
Reason: Improve decoupling according to Xilinx recommendation.
Impact: None.
#11 Removed serial number S/N and
...
use FPGA U4 pins H14, D10, R6, J6 for PCB REV identification.
Type: Schematic Change
Reason: EOL of component.
...
Overview
Content Tools