Page History

Design Name is always "TE Series Name" + Design name, for example "TE0720 Test Board"

Important General Note:

• Export PDF to download, if vivado revision is changed!

• Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

  • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

    • Figure template (note: inner scroll ignore/only only with drawIO object):

      Scroll Title
      anchor Figure_xyz title Text
      Scroll Ignore Create DrawIO object here: Attention if you copy from other page, use Scroll Only image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

      
      

    • Table template:

      • Layout macro can be use for landscape of large tables
      • Set column width manually (can be used for small tables to fit over whole page) or leave empty (automatically)

    • 
      

      Scroll Title
      anchor Table_xyz title Text
      Scroll Table Layout orientation portrait sortDirection ASC repeatTableHeaders default style widths sortByColumn 1 sortEnabled false cellHighlighting true Example Comment 1 2

      
      

• ...

Notes :

• short description of the design

• Short Link of "Scroll only" macro:

  • Use short link the Wiki Resource page, for example: http://trenz.org/te0720-info

  • List of available short links: Redirects

Notes :

• Add basic key futures, which can be tested with the design

• Vitis/Vivado 2022.2
• TEBF0818
• PetaLinux
• USB
• ETH
• MAC from EEPROM
• PCIe
• SATA
• SD
• I2C
• RGPIO
• Display Port (DP)
• user LED access
• Modified FSBL for Si5338 programming/ petalinux patch

Notes :

• add every update file on the download
• add design changes on description

• add known Design issues and general notes for the current revision
• do not delete known issue, add fixed version time stamp if issue fixed

Notes :

• list of software which was used to generate the design

Notes :

• list of hardware which was used to generate the design
• mark the module and carrier board, which was used tested with an ^*

^*used as reference

Notes :

• content of the zip file

Notes :

• prebuilt files
• Template Table:

  • 
    

    Scroll Title
    anchor Table_PF title-alignment center title Prebuilt files
    Scroll Table Layout orientation portrait sortDirection ASC repeatTableHeaders default style widths sortByColumn 1 sortEnabled false cellHighlighting true File File-Extension Description BIF-File *.bif File with description to generate Bin-File BIN-File *.bin Flash Configuration File with Boot-Image (Zynq-FPGAs) BIT-File *.bit FPGA (PL Part) Configuration File Boot Script-File *.scr Distro Boot Script file DebugProbes-File *.ltx Definition File for Vivado/Vivado Labtools Debugging Interface Debian SD-Image *.img Debian Image for SD-Card Diverse Reports --- Report files in different formats Device Tree *.dts Device tree (2 possible, one for u-boot and one for linux) Hardware-Platform-Description-File *.xsa Exported Vivado hardware description file for Vitis and PetaLinux LabTools Project-File *.lpr Vivado Labtools Project File MCS-File *.mcs Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only) MMI-File *.mmi File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only) OS-Image *.ub Image with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk) Software-Application-File *.elf Software Application for Zynq or MicroBlaze Processor Systems SREC-File *.srec Converted Software Application for MicroBlaze Processor Systems

    
    

• Important set new Vivado version link on every Design update of new vivado version!
• Set Link to download folder (Remove ../de/.. ../en/.. from url) for example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0712/Reference_Design/2018.2/test_board

• Basic Design Steps

• Add/ Remove project specific description

Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.

Caution! Win OS has a 260 character limit for path lengths which can affect the Vivado tools. To avoid this issue, use Virtual Drive or the shortest possible names and directory locations for the reference design (for example "x:\<project folder>")

Note:

• Programming and Startup procedure

Check Module and Carrier TRMs for proper HW configuration before you try any design.

Reference Design is also available with prebuilt files. It's recommended to use TE prebuilt files for first launch.

Note:

• Add picture of HW Manager

• add notes for the signal either groups or topics, for example:
  

  Control:

  • add controllable IOs with short notes..

  Monitoring:

  • add short notes for signals which will be monitored only
  • SI5338 CLKs:
    • Set radix from VIO signals to unsigned integer.
      Note: Frequency Counter is inaccurate and displayed unit is Hz
    • expected CLK Frequency...
      

Note:

• Description of Block Design, Constrains... BD Pictures from Export...

Note:

• optional for Zynq / ZynqMP only

• add basic PS configuration

set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design]

#TEBF0818 
# system controller ip
#LED_HD SC0     J3:C13
#LED_XMOD SC17  J3:B19 
#CAN RX SC19    J3:B23 B26_L2_P
#CAN TX SC18    J3:B22 B26_L2_N
#CAN S SC16     J3:B18 B26_L3_N

set_property PACKAGE_PIN J14 [get_ports BASE_sc0]
set_property PACKAGE_PIN F15 [get_ports BASE_sc5]
set_property PACKAGE_PIN H13 [get_ports BASE_sc6]
set_property PACKAGE_PIN H14 [get_ports BASE_sc7]
set_property PACKAGE_PIN A15 [get_ports BASE_sc10_io]
set_property PACKAGE_PIN B15 [get_ports BASE_sc11]
set_property PACKAGE_PIN C13 [get_ports BASE_sc12]
set_property PACKAGE_PIN C14 [get_ports BASE_sc13]
set_property PACKAGE_PIN E13 [get_ports BASE_sc14]
set_property PACKAGE_PIN E14 [get_ports BASE_sc15]
set_property PACKAGE_PIN A13 [get_ports BASE_sc16]
set_property PACKAGE_PIN B13 [get_ports BASE_sc17]
set_property PACKAGE_PIN A14 [get_ports BASE_sc18]
set_property PACKAGE_PIN B14 [get_ports BASE_sc19]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc0]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc5]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc6]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc7]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc10_io]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc11]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc12]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc13]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc14]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc15]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc16]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc17]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc18]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc19]

# Audio Codec
#LRCLK      J3:D22 
#BCLK       J3:D23 
#DAC_SDATA  J3:C21 
#ADC_SDATA  J3:C22 
set_property PACKAGE_PIN G14 [get_ports I2S_lrclk ]
set_property PACKAGE_PIN G15 [get_ports I2S_bclk ]
set_property PACKAGE_PIN F13 [get_ports I2S_sdin ]
set_property PACKAGE_PIN G13 [get_ports I2S_sdout ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_lrclk ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_bclk ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_sdin ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_sdout ]

• optional chapter separate

• sections for different apps

----------------------------------------------------------

FPGA Example

scu

MCS Firmware to configure SI5338 and Reset System.

srec_spi_bootloader

TE modified 2022.2 SREC

Bootloader to load app or second bootloader from flash into DDR

Descriptions:

• Modified Files: blconfig.h, bootloader.c
• Changes:
  
  • Add some console outputs and changed bootloader read address.
  • Add bugfix for 2018.2 qspi flash

xilisf_v5_11

TE modified 2022.2 xilisf_v5_11

• Changed default Flash type to 5.

----------------------------------------------------------

Zynq Example:

fsbl

TE modified 2022.2 FSBL

General:

• Modified Files: main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)

• Add Files: te_fsbl_hooks.h/.c (for hooks and board)

• General Changes: 
  
  • Display FSBL Banner and Device ID

Module Specific:

• Add Files: all TE Files start with te_*
  
  • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
  • CPLD access
  • Read CPLD Firmware and SoC Type
  • Configure Marvell PHY

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 2022.2 FSBL

General:

• Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c (search for 'TE Mod' on source code)
• Add Files: te_xfsbl_hooks.h/.c (for hooks and board)
• General Changes: 
  
  • Display FSBL Banner and Device Name

Module Specific:

• Add Files: all TE Files start with te_*
  
  • Si5338 Configuration
  • ETH+OTG Reset over MIO

zynqmp_pmufw

Xilinx default PMU firmware.

----------------------------------------------------------

General Example:

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.

• optional chapter separate

• sections for linux

• Add "No changes." or "Activate: and add List"

/include/ "system-conf.dtsi"


/*------------------ gtr --------------------*/

//https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841716/Zynq+Ultrascale+MPSOC+Linux+SIOU+driver

/ {
refclk3:psgtr_dp_clock {
compatible = "fixed-clock";
#clock-cells = <0x00>;
clock-frequency = <27000000>;
};

refclk2:psgtr_pcie_usb_clock {
compatible = "fixed-clock";
#clock-cells = <0x00>;
clock-frequency = <100000000>;
};

refclk1:psgtr_sata_clock {
compatible = "fixed-clock";
#clock-cells = <0x00>;
clock-frequency = <150000000>;
};

refclk0:psgtr_unused_clock {
compatible = "fixed-clock";
#clock-cells = <0x00>;
clock-frequency = <100000000>;
};
};

&psgtr {
clocks = <&refclk0 &refclk1 &refclk2 &refclk3>;
//clocks = <&refclk0 &refclk2 &refclk3>;
/* ref clk instances used per lane */
clock-names = "ref0\0ref1\0ref2\0ref3";
};



/*------------------ SD --------------------*/
&sdhci0 {
// disable-wp;
no-1-8-v;

};

&sdhci1 {
// disable-wp;
no-1-8-v;

};


/*------------------- USB --------------------*/
&dwc3_0 {
status = "okay";
dr_mode = "host";
snps,usb3_lpm_capable;
snps,dis_u3_susphy_quirk;
snps,dis_u2_susphy_quirk;
phy-names = "usb2-phy","usb3-phy";
maximum-speed = "super-speed";
};


/*------------------ ETH PHY --------------------*/
&gem3 {
/delete-property/ local-mac-address;
phy-handle = <&phy0>;

nvmem-cells = <&eth0_addr>;
nvmem-cell-names = "mac-address";

phy0: phy0@1 {
device_type = "ethernet-phy";
reg = <1>;
};
};

/*----------------- SATA PHY --------------------*/
&sata {

ceva,p0-burst-params = <0x13084a06>;
ceva,p0-cominit-params = <0x18401828>;
ceva,p0-comwake-params = <0x614080e>;
ceva,p0-retry-params = <0x96a43ffc>;
ceva,p1-burst-params = <0x13084a06>;
ceva,p1-cominit-params = <0x18401828>;
ceva,p1-comwake-params = <0x614080e>;
ceva,p1-retry-params = <0x96a43ffc>;

};


/*-------------------- QSPI ---------------------*/
&qspi {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
};
};


/*------------------ I2C --------------------*/
&i2c0 {
i2cswitch@73 { // u
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
i2c@0 { // MCLK TEBF0818 SI5338A, 570FBB000290DG_unassembled
reg = <0>;
};
i2c@1 { // SFP TEBF0818 PCF8574DWR
reg = <1>;
};
i2c@2 { // PCIe
reg = <2>;
};
i2c@3 { // SFP1 TEBF0818
reg = <3>;
};
i2c@4 {// SFP2 TEBF0818
reg = <4>;
};
i2c@5 { // TEBF0818 EEPROM
reg = <5>;
eeprom: eeprom@50 {
compatible = "microchip,24aa025", "atmel,24c02";
reg = <0x50>;

#address-cells = <1>;
#size-cells = <1>;
eth0_addr: eth-mac-addr@FA {
reg = <0xFA 0x06>;
};
};
};
i2c@6 { // TEBF0818 FMC
reg = <6>;
};
i2c@7 { // TEBF0818 USB HUB
reg = <7>;
};
};
i2cswitch@77 { // u
compatible = "nxp,pca9548";
reg = <0x77>;
i2c-mux-idle-disconnect;
i2c@0 { // TEBF0818 PMOD P1
reg = <0>;
};
i2c@1 { // i2c Audio Codec
reg = <1>;
/*
adau1761: adau1761@38 {
compatible = "adi,adau1761";
reg = <0x38>;
};
*/
};
i2c@2 { // TEBF0818 Firefly A
reg = <2>;
};
i2c@3 { // TEBF0818 Firefly B
reg = <3>;
};
i2c@4 { //Module PLL Si5338 or SI5345
reg = <4>;
};
i2c@5 { //TEBF0818 CPLD
reg = <5>;
};
i2c@6 { //TEBF0818 Firefly PCF8574DWR
reg = <6>;
};
i2c@7 { // TEBF0818 PMOD P3
reg = <7>;
};
};
};

te_* files are identical to files in "<project folder>\sw_lib\sw_apps\zynqmp_fsbl\src" except for the PLL files (SI5338) which depend on PLL revision. The PLL files may have to be copied again manually into the appropriate petalinux folder "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\embeddedsw\fsbl-firmware\git\lib\sw_apps\zynqmp_fsbl\src"

• Add description for other Software, for example SI CLK Builder ...
• SI5338 and SI5345 also Link to:
  • Si5345
  • Si5338

• Note this list must be only updated, if the document is online on public doc!
• It's semi automatically, so do following
  

  • Add new row below first

  • Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

  • Metadata is only used of compatibility of older exports