Page History
...
LED's D3 and D4 are connected to the 4x5 B2B connector pins. Those LEDs can be controlled by FPGA Module
DIP switches
Switch | ON | OFF | Notes |
---|---|---|---|
S2-1 | User configurable, routed to CPLD | User configurable, routed to CPLD | |
S2-2 | User configurable, routed to CPLD | User configurable, routed to CPLD | |
S2-3 | JTAG enabled for B2B connector JB2 | JTAG enabled for CPLD | |
S2-4 | Boot from SD Card | Boot from QSPI flash on module | Used as CARD Detect - as the SD card connector had no CD pin |
Power and Power-On Sequence
...
Overview
Content Tools