Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

 

There are two base board supply-voltages VIOTA, VIOTB and for the 4x5 SoM's PL IO-banks. The supply-voltages have following pin assignments on B2B-connectors:

base-board VCCIO

base-board B2B connector-pinsstandard assignment of PL IO-bank supply-voltages on TE 4x5 modules B2B connectors

base-board voltages and signals connected with

VIOTAJB2-2, JB2-4, JB2-6VCCIOB (JM2-1, JM2-3) / VCCIOC (JM2-5)HDMI_SCL, HDMI_SDA, HDMI_INT, J5 VCCIO
VIOTBJB1-10, JB1-12, JB2-8, JB2-10VCCIOA (JM1-9, JM1-11) / VCCIOD (JM2-7, JM2-9)VCCIO1 (Systm-Controller-CPLD pin 55, 73)

Table 4: base-board supply-voltages VIOTA and VIOTB

 

 

Note

Note: The corresponding PL IO-voltage supply voltages of the 4x5 SoM to the selectable base-board voltages VIOTA and VIOTB are depending on the mounted 4x5 SoM and varying in order of the used model.

Refer to SoM's schematic to get information about the specific pin assignment on module's B2B-connectors regarding PL IO-bank supply voltages and to the 4x5 Module integration Guide for VCCIO voltage options.

 

Following table gives the conjunction between the base-board supply-voltages VIOTA, VIOTB  and the PL IO-bank's voltages of 4x5 SoMs:

supported 4x5 SoMs vs

base-board VCCIO

TE0710TE0711TE0712TE0713TE0715-xx-15TE0715-xx-30TE0720TE0741TE0841
VIOTANCB34 (VCCIOB)B13 (VCCIOB)
-
B13 (VCCIOB)B34 (VCCIOC)B34 (HP bank, VCCIOC)

B33 (VCCIOC)

B34 (VCCIOB)

B15 (VCCIOC)

B16 (VCCIOB)

B66 (HP bank, VCCIOB)

B68 (HP bank, VCCIOC)

VIOTB

B15 (VCCIOA)

B34 (VCCIOD)

B15 (VCCIOA)

B35 (VCCIOD)

B16 (VCCIOA)

B15 (VCCIOD)

-

B16 (VCCIOA)

B15 (VCCIOD)

B13 (VCCIOA)

B35 (VCCIOD)

B13 (VCCIOA)

B35 (HP bank, VCCIOD)

B35 (VCCIOA)

B13 (VCCIOD)

B13 (VCCIOA)

B12 (VCCIOD)

B64 (VCCIOA)

B67 (HP bank, VCCIOD)

Table 5: base-board supply-voltages VIOTA and VIOTB in conjunction with PL IO-bank voltages

 

Following table describes how to configure the base-board supply-voltages by jumpers:

base-board supply-voltages vs

voltage-levels

VIOTAVIOTBUSB-VBUS12V0_CL
3V3J17:1-2, 3 & J16: openJ17: 1-2, 3 & J16: open & J21:1-2, 3--
2V5J17:1, 2-3 & J16: openJ17:1, 2-3 & J16: open & J21: 1-2, 3--
FMC-VADJJ17: open & J16: 1-2J21:1, 2-3--
5V0 intern--

J9:1-2, 3 & J19: 1-2

(J20: 1-2: additional blocking-capacitors)

-
Vbus extern--J9: 1, 2-3 & J19: open-
12V_LC---J18: 1-2

Table 6: Configuration of base-board supply voltages via jumpers

...