Page History
...
Following table shows how to configure the voltage-levels of base-board supply-voltages VCCIOA, VCCIOB and VCCIOC by jumper, 0-Ohm-resistor or by feeding the supply voltage through connector J6:
supply-voltage by jumper | supply-voltage by 0-Ohm-resistor | supply-voltage by connector J6 | ||||
---|---|---|---|---|---|---|
voltage level | 1.8V | 3.3V | 1.8V | 3.3V | variable | |
VCCIOA | J10: 1-2, 3 | J10: 1, 2-3 | - | R20 | J6 pin B32 | |
VCCIOB | J11: 1-2, 3 | J11: 1, 2-3 | R29 | R21 | - | |
VCCIOC | J12: 1-2, 3 | J12: 1, 2-3 | R30 | R22 | J6 pin B1 |
Jumper-Notification: 'Jx: 1-2, 3' means pins 1 and 2 are connected, 3 is open. 'Jx: 1, 2-3' means pins 2 and 3 are connected, 1 is open.
...
Overview
Content Tools