Page History
...
LED's D3 and D4 are also connected to the B2B connector JB2 pins FLED1 and FLED2 respectively and can be controlled by 4x5 SoM FPGA module.
DIP switches
Switch | ON | OFF | Notes |
---|---|---|---|
S2-1 | User configurable, routed to CPLD | User configurable, routed to CPLD | |
S2-2 | User configurable, routed to CPLD | User configurable, routed to CPLD | |
S2-3 | JTAG enabled for B2B connector JB2 | JTAG enabled for CPLD | |
S2-4 | Boot from SD Card | Boot from QSPI flash on module | Used as CARD Detect - as the SD card connector has no CD pin |
Power and Power-On Sequence
...
Parameter | Min | Max | Units | Reference document |
---|---|---|---|---|
Supply Voltage VCC | -0.33 | 5.5 | V | |
Operating temperature | -40 | +125 | °C | MachXO2 Family Datasheetfamily datasheet |
Storage temperature | -55 | +125 | °C |
Recommended Operating Conditions
Parameter | Min | Max | Units | Reference document |
---|---|---|---|---|
Supply |
voltage VCC | 4.75 | 5.25 | V | |
Operating temperature | 0 | +70 | °C |
Note |
---|
Assembly variants for higher storage temperature range are available on request. |
...
Board operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Weight
42g - Plain board.
13g - VG96 connector x 22 x VG96 connectors.
Revision History
Hardware Revision History
...
Overview
Content Tools