Page History
...
Parameter | Min | Max | Units | Notes | |||||
---|---|---|---|---|---|---|---|---|---|
VIN supply voltage | -0.3 | 6.0 | V | - | |||||
3.3VIN supply voltage | -0.4 | 3.6 | V | - | |||||
VBAT supply voltage | -1 | 6.0 | V | - | |||||
PL IO bank supply voltage for HR I/O banks (VCCO) | -0.5 | 3.6 | V | - | |||||
PL IO bank supply voltage for HP I/O banks (VCCO) | -0.5 | 2.0 | V | TE0715-xx-15 does not have HP banks. | |||||
I/O input voltage for HR I/O banks | -0.4 | VCCO_X+0.55 | V | - | |||||
I/O input voltage for HP I/O banks | -0.55 | VCCO_X+0.55 | V | TE0715-xx-15 does not have HP banks. | |||||
GT receiver (RXP/RXN) and transmitter (TXP/TXN) | -0.5 | 1.26 | V | - | |||||
Voltage on module JTAG pins | -0.4 | VCCO_0+0.55 | V | 3 | 3.6 | V | MachX02 Family Data SheetVCCO_0 is 3.3V nominal. | ||
Storage temperature | -40 | +85 | °C | - | |||||
Storage temperature without the ISL12020MIRZ | -55 | +100 | °C | - |
...
Recommended Operating Conditions
Parameter | Min | Max | Units | Notes | Reference Document |
---|
VBAT_IN supply voltage | 2.7 | 5.5 | V | - |
- | |||||
PL I/O bank supply voltage for HR | 1.14 | 3.465 | V | - | Xilinx datasheet DS191 |
PL I/O bank supply voltage for HP | 1.14 | 1.89 | V | - | Xilinx datasheet DS191 |
I/O input voltage for HR I/O banks | (*) | (*) | V | (*) Check datasheet | Xilinx datasheet DS191 |
I/O input voltage for HP I/O banks | (*) | (*) | V | (*) Check datasheet | Xilinx datasheet DS191 |
GT receiver (RXP/RXN) and transmitter (TXP/TXN) | (*) | (*) | V | (*) Check datasheet | Xilinx datasheet DS191 |
Voltage on Module JTAG pins | 3.135 | 3. |
6 | V |
JTAG-signals forwarded to Zynq-module config bank 0 | MachX02 Family Data Sheet |
Note |
---|
Please check Xilinx datasheet DS191 (for XC7Z030) for complete list of absolute maximum and recommended operating ratings. |
...
Overview
Content Tools