Page History

Image Modified

2015 First year an Xilinx 7 series based product or Zynq based product passed into semifinals for the   HackdaDay prize Trip To Space   A small step for those on the way to All Programmable ... ... world?

Image Modified

DIPFORTy1 PINOUT

Pinout for Parallax Propeller compatible names

TOP Side	Bottom Side
Image Modified	Image Modified
Image Modified	Image Modified

Features

• Xilinx ZYNQ-7: XC7Z010-CLG225
  • 16 MByte SPI Flash (primary boot)
  • 33.333 MHz Clock (MEMS oscillator)
• DIP40 form factor
  • 2 x 20 holes for socket pins or pin-header
  • Size: 18 x 51 mm
• Total user accessible PL I/O: 46 (+3 Input only)
  • DIP40 header pins: 34 I/O
  • XMOD J1: 6 I/O
  • XMOD J2: JTAG + 2 I/O (or 3 input + 2 I/O)
  • XMOD J3: 4 I/O
• 3.3V single supply
• RGB LED (PL I/O connected)
• "Done" LED (inverted polarity)
• User LED (ARM CPU MIO GPIO)
• MicroSD card socket (MIO, ZYNQ secondary boot media)
• Sil1143 Proximity and ambient light sensor

...

JTAG Header

Image Added

TE0722 JTAG Connector J2 -TOP view

Use XMOD - Programmer

XMOD Programmer can be used as JTAG-Programmer and UART Interface.

Image Added

JTAG header pinout using "alternate" mapping for XMOD-FT2232 JTAG adapter. This mapping, if needed can be changed by reprogramming the XMOD-CPLD

...

. Connect XMOD on the top side of the PCB (Side with FPGA and module name). Use XMOD Pin 1 to 10.

If TE0722 is powered via XMOD (max. ~ 100mA), use XMOD DIP-Switch:

If TE0722 is powered with external 3.3V, use XMOD DIP-Switch:

For more details and downloads see:

• Xmod-FT2232H
• XMOD-Downloads

Use other JTAG - Programmer

For example Xilinx Platform Cable USB2 or Digilent XUP USB-JTAG Programming Cable.

Image Added

If you use a other programming cable than XMOD, TE0722 need a external 3.3V power supply. Use following connection: