Versions Compared

Old Version 4

changes.mady.by.user Jan Kumann

Saved on

compared with

New Version 5

changes.mady.by.user Jan Kumann

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Micro SD memory card connector J9 with detect switch is connected to the Zynq Soc PS MIO bank 500. See also section Default MIO Mapping.

FPGA IO Banks Pin Mapping

BankZynq PinNameConnected To
34G14PUDCJumper J14
35G15DSI_XASystem Controller CPLD, pin 16
35F15DSI_XBSystem Controller CPLD, pin 17

Page break

GPIO to Header J8 Interface Mapping

GPIO NameZynq PinJ8 Pin GPIO NameZynq PinJ8 Pin
GPIO2K153 GPIO15N1310
GPIO3J145 GPIO16L1336
GPIO4H127 GPIO17G1111
GPIO5N1429 GPIO18H1112
GPIO6R1531 GPIO19R1235
GPIO7L1426 GPIO20M1438
GPIO8L1524 GPIO21P1540
GPIO9J1321 GPIO22H1315
GPIO19H1419 GPIO23J1116
GPIO11J1523 GPIO24K1118
GPIO12M1532 GPIO25K1322
GPIO13R1333 GPIO26L1237
GPIO14M128 GPIO27G1213

FPGA IO Banks Pin Mapping

System Controller CPLD, pin 17
BankZynq PinNameConnected To
34G14PUDCJumper J14
35G15DSI_XASystem Controller CPLD, pin 16
35F15DSI_XB

Default MIO Mapping

Bank 500 MIOs

...

Normally TE0726 module is powered by micro-USB connector J1 VBUS pin, which voltage level is controlled by host according to the USB standards and should be 5V, so there is not much user can control here if using standard USB equipment. However if power.

Absolute Maximum Ratings

Parameter

MinMax

Units

Notes

Power supply voltage

2.7

5.5

V

See AP2152SG-13 datasheet. Not applicable if TE0726 module is powered by micro-USB connector J1 as VBUS pin voltage level of 5V is controlled by the supplying side equipment.

Storage temperature

-55

+125

°C

-

Recommended Operating Conditions

ParameterMinMaxUnitsNotes
Power supply voltage

2.7

5.5VSee AP2152SG-13 datasheet.
Operating temperature070

°C

-

Physical Dimensions

  • Module size: 40 mm × 30 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 8 mm

  • PCB thickness: 1.6 mm

  • Highest part on PCB: approximately 2.5 mm. Please download the step model for exact numbers.

...