Page History
...
If TE0726 module is powered by micro-USB connector J1 VBUS pin, which voltage level is controlled by supplying host according to the USB standards and should be 5V, there is not much user can control here if using standard USB equipment. However, user can also power the module by applying voltage to the J5 connector from other external sources. In both cases following maximum voltage ratings apply.
Absolute Maximum Ratings
Parameter | Min | Max | Units | Notes |
|---|---|---|---|---|
Power supply voltage | 2.7 | 6.5 | V | See AP2152SG-13 datasheet. Not applicable if TE0726 module is powered by micro-USB connector J1 as VBUS pin voltage level of 5V is controlled by the supplying side equipment. |
| PS MIO input voltage | -0.4 | VCCO_MIO + 0.55 | V | VCCO_MIO0_500 and VCCO_MIO0_501. |
| PL Bank 34 I/O input voltage | -0.4 | VCCO_34 + 0.55 | V | |
| PL Bank 35 I/O input voltage | -0.4 | VCCO_35 + 0.55 | V | |
Storage temperature | -55 | +125 | °C | - |
See also the Xilinx datasheet DS187 for more information about absolute maximum ratings.
Recommended Operating Conditions
| Parameter | Min | Max | Units | Notes |
|---|---|---|---|---|
| Power supply voltage | 2.7 | 5.5 | V | See AP2152SG-13 and EN5311QI datasheets. |
| PS MIO input voltage | -0.2 | VCCO_MIO + 0.2 | V | VCCO_MIO0_500 and VCCO_MIO0_501. |
| PL Bank 34 I/O input voltage | -0.2 | VCCO_34 + 0.2 | V | |
| PL Bank 35 I/O input voltage | -0.2 | VCCO_35 + 0.2 | V | |
| Operating temperature | 0 | 70 | °C | See LAN9514 datasheet. |
The module operating temperature range depends on customer design and cooling solution. Please contact us for options.Page break
...
Overview
Content Tools