Page History
...
Name | IC | ID | PS7 | MIO | Notes |
---|---|---|---|---|---|
SPI Flash | S25FL256SAGBHI20 | U14 | QSPI0 | MIO1..MIO6 | |
EEPROM I2C | 24AA025E48 | U19 | I2C1 | MIO48, MIO49 | EEPROM for MAC address. |
RTC | ISL2020 | U16 | I2C1 | MIO48, MIO49 | Temperature compensated RTC. |
RTC Interrupt | ISL2020 | U16 | GPIO | MIO47 | Real Time Clock interrupt. |
Clock PLL | Si5338 | U10 | I2C1 | MIO48, MIO49 | Low jitter phase locked loop. |
LED | - | D4 | GPIO | MIO7 | |
USB | USB3320 | U6 | USB0 | MIO28..MIO39 | |
USB Reset | - | - | GPIO | MIO51 | |
Ethernet | 88E1512 | U7 | ETH0 | MIO16..MIO27 | |
Ethernet Reset | - | - | GPIO | MIO50 |
Clocking
RTC - Real Time Clock
An temperature compensated Intersil ISL12020M is used for Real Time Clock (U16). Battery voltage must be supplied to the module from the baseboard. Battery backed registers can be accessed over I2C bus at slave address of 0x6F. General purpose RAM is at I2C slave address 0x57. RTC IC is supported by Linux so it can be used as hwclock device.
...
Variants Currently in Production
Module Variant | Zynq SoC | Temperature Range | B2B Connector Height |
---|---|---|---|
TE0715-04-15-1I | XC7Z015-1CLG485I | Industrial | 4.0 mm |
TE0715-04-15-2I | XC7Z015-2CLG485I | Industrial | 4.0 mm |
TE0715-04-30-1I | XC7Z030-1SBG485I | Industrial | 4.0 mm |
TE0715-04-30-3E | XC7Z030-3SBG485E | Extended | 4.0 mm |
TE0715-04-15-1I3 | XC7Z015-1CLG485I | Industrial | 2.5 mm |
TE0715-04-30-1I3 | XC7Z030-1SBG485I | Industrial | 2.5 mm |
TE0715-04-30-1C | XC7Z030-1SBG485C | Commercial | 4.0 mm |
Technical Specifications
Absolute Maximum Ratings
...
Overview
Content Tools