Page History
...
TesKit is a "Test Fixture" for testing TE0808, most I/O pins are looped back for I/O Connector connectivity testing. For additional testing an LVDS oscillator is providing known clock to GT Reference Clock. SMA Connectors are provided on PL and on PS Connected GT lanes. Connector is provided for direct connection to SiLabs ClockBuilder Pro Field Programmer for Si5345 Programming.
Item | Name | Vendor | Separate Order | Comments |
---|---|---|---|---|
1 | TE0808 or TE803 | Trenz | TE0808, TE0803 | |
3 | TE0790 USB JTAG/UART Adapter | Trenz | TE0790 | |
4 | SMA Cable (50 cm long), 4 pcs | |||
5 | mini USB Cable | |||
6 | Cables for power (2mm Banana Connector), 2 pcs | |||
7 | ClockBuilder Pro Programmer | SiLabs | digikey / mouser |
Note |
---|
NOTE: Kit Content may be different, depending on customer agreements. Positions 1 to 3 are always included. |
...
TesKit808, mini-USB cable not connected, 3.3V power applied.
TE0790 SW | TE0808 RLED | TE0790 GLED | TE0790 RLED | DONE | ERR |
---|---|---|---|---|---|
Pressed | OFF | ON | ON | OFF | OFF |
Released | OFF | ON | ON | ON | ON |
Function Description
GT transceiver have either internal connection or loopbacks or are connected to SMA Connectors. Note that connections to SMA are not AC Coupled!
QUAD | Lane | Function |
---|---|---|
B128 | 0 | on-board loopback |
B128 | 0 | B505 Lane 1 |
B128 | 1 | B505 Lane 2 |
B128 | 2 | B505 Lane 3 |
B228 | 0-3 | on-board loopback |
B229 | 0-3 | on-board loopback |
B230 | 0-2 | on-board loopback |
B230 | 3 | SMA Connectors |
B505 | 0 | SMA Connectors |
B505 | 1 | B128 Lane 0 |
B505 | 2 | B128 Lane 1 |
B505 | 3 | B128 Lane 2 |
GT Transceiver connections and loopbacks.
...
UART is available on MIO68, MIO69 via the supplied TE0790 USB Module. TE0808 and TE0803 board parts do not support this settings. They must be changed manually.
Boot Mode Settings
M3 | M2 | M1 | M0 | Bootmode Hex | Bootmode | Notes |
---|---|---|---|---|---|---|
ON | ON | ON | ON | 0x0 | PS Main JTAG (TE0790 USB JTAG) | Needed for SPI Flash Programming |
ON | ON | OFF | ON | 0x2 | SPI Flash (dual parallel, 4bit x 2, 32bit Addressing) | Default |
SPI Flash Programming
Flash programming is supported from SDK GUI, fsbl.elf that is needed is provided in common download area.
...
- Silabs ClockBuilder Pro Field Programmer
- TEBT0808 Documentation
- TE0808 Documentation
- Xilinx Zynq UltraScale MPSoC Base TRD
Document Change History
Date | Revision | Contributors | Description |
---|---|---|---|
2017-06-07 | John Hartfiel | Initial version. |
Disclaimer
Include Page | ||||
---|---|---|---|---|
|