Page History
...
Power Input Pin | Max Current |
---|---|
VIN (power connector jack J13) | 4A |
Typical power consumption for TE0703-05 + TE0715-01 module with SD micro card inserted, Ethernet connected and link up, system booted into Linux prompt and idling is 5V / 0.55A.
...
Jumper J10 | 1-2 | 2-3 | Voltage |
---|---|---|---|
VCCIOD | ON | OFF | 1.8 V |
VCCIOD | OFF | ON | 3.3 V |
Note |
---|
Take care of the VCCO voltage ranges of the particular PL IO-banks (HR, HP) of the mounted SoM, otherwise damages may occur to the FPGA. Therefore, refer to the TRM of the mounted SoM to get the specific information of the voltage ranges. It is recommended to set and measure the PL IO-bank supply-voltages before mounting of TE 4 x 5 module to avoid failures and damages to the functionality of the mounted SoM. |
Technical Specifications
Absolute Maximum Ratings
...
Overview
Content Tools