Page History
...
Scroll pdf ignore | |
---|---|
Table of Contents
|
Overview
Scroll Only (inline) |
---|
Refer to https://wiki.trenz-electronic.de/display/PD/TE0820+TRM for online version of this manual and additional technical documentation of the product.
|
The Trenz Electronic TE0820 is 4 x 5 cm standard footprint MPSoC module integrating a Xilinx Zynq UltraScale+ with up to 4 GByte 32-Bit DDR4 SDRAM, max. 512 MByte SPI Boot Flash memory for configuration and operation and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips. All Trenz Electronic SoMs in 4 x 5 cm form factor are mechanically compatible.
...
See also TE0820 System Controller CPLD page.
eMMC Flash Memory
eMMC Flash memory device(U6) is connected to the ZynqMP PS MIO bank 500 pins MIO13..MIO23. eMMC chips MTFC4GACAJCN-4M IT (FLASH - NAND Speicher-IC 32 Gb (4 G x 8) MMC ) is used.
DDR4 Memory
By default TE0820-02 module has two 16-bit wide Nanya NT5AD256M16B2 DDR4 SDRAM chips arranged into 32-bit wide memory bus providing total of 1 GBytes of on-board RAM. Different memory sizes are available optionally.
...
Date | Revision | Contributors | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
| John Hartfiel |
| |||||||||
2017-09-25 | v.48 | John Hartfiel |
| ||||||||
2017-09-18 | v.4947 | John Hartfiel |
| ||||||||
2017-08-30 | v.46 | Jan Kumann |
| ||||||||
2017-08-24 | v.36 | John Hartfiel |
| ||||||||
2017-08-21 | v.34 | John Hartfiel |
| ||||||||
2017-08-21 | v.33 | Jan Kumann |
| ||||||||
2017-08-18 | v.7 | John Hartfiel |
| ||||||||
2017-08-07 | v.5 | Jan Kumann | Initial version. |
...