Page History
...
Note |
---|
Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first lunchlaunch. |
Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.
...
HTML |
---|
<!-- Example: Connect JTAG and power on PCB (if not done) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd" or open with "vivado_open_project_guimode.cmd", if generated. Type on Vivado Console: TE::pr_program_flash_mcsfile -swapp u-boot Note: Alternative use SDK or setup Flash on Vivado manually Reboot (if not done automatically) --> |
Used this if you use description for CPLD Firmware with QSPI Boot selectable
- Set Boot Mode to JTAG (See Carrier and TE0820 CPLD description)
- Connect JTAG
- Power ON PCB
- Program Flash
- Open Vivadi HW-Manager (use Auto Connect)
- Right Click on FPGA Device (xczu...) and "Add Configuration Memory Device"
- Select "mt25qu256-qspi-x8-dual_parallel"
- On "Program Configuration Memory Device":
- Set Configuration file: "prebuilt\boot_images\<short name>\u-boot\BOOT.bin"
- Set Zynq FSBL: "prebuilt\software\<short name>\zynqmp_fsbl.elf"
- Press OK
- Note: Other possible ways, see Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging
Do not use Trenz Script for Programming at the moment. Dual Parallel Flash Scripts support is not implemented.
- Copy image.ub on SD-Card.
- For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
- Power OFF PCB
- Set Boot Mode to QSPI
- Depends on Carrier, see carrier TRM.
SD
Used this description for CPLD Firmware with SD Boot selectable
- Copy image.ub and Boot.bin on SD-Card.
- For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
- Set Boot Mode to SD-Boot.
- Depends on Carrier, see carrier TRM.
- Insert SD-Card in SD-Slot.
...
Date | Document Revision | Authors | Description | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
| ||||||||||||||||||||||
2017-10-23 | v.13 | John Hartfiel |
| ||||||||||||||||||||||
2017-10-19 | v.9 | John Hartfiel |
| ||||||||||||||||||||||
2017-09-11 | v.1 |
| Initial release | ||||||||||||||||||||||
All |
|
...
Overview
Content Tools