Page History
...
DIP switch settings are CPLD Firmware depends, default firmware:
| Switch | ON | OFF | Notes |
|---|---|---|---|
| S2-1 | Force CD Pin to module to GND | set CD Pin to module to SD CD Pin | TE0703 CPLD - CC703S#CC703S-SD |
| S2-2 | Module FPGA JTAG access ( if S2-3 ON) | Module CPLD JTAG access ( if S2-3 ON) | TE0703 CPLD - CC703S#CC703S-JTAG |
| S2-3 | Module FPGA/CPLD JTAG access ( depends on S2-3) | Carrier CPLD JTAG access | TE0703 CPLD - CC703S#CC703S-JTAG |
| S2-4 | Boot from SD Card (set Pin to GND) | Boot from QSPI flash on module (set Pin to VDD) | TE0703 CPLD - CC703S#CC703S-BootMode |
Mode status is displayed on TE0703 LEDs, see TE0703 CPLD - CC703S#CC703S-LED.
Power
Power supply with minimum current capability of 3A for system startup is recommended.
...
Overview
Content Tools